[PATCH v5 2/2] QE: remove PPCisms for QE

[Leo Li]

On Tue, Sep 20, 2016 at 8:13 PM, Qiang Zhao <qiang.zhao at nxp.com> wrote:
> On Mon, Sep 20, 2016 at 4:13 AM, Leo Li wrote:
>> -----Original Message-----
>> From: Leo Li [mailto:pku.leo at gmail.com]
>> Sent: Tuesday, September 20, 2016 4:13 AM
>> To: Qiang Zhao <qiang.zhao at nxp.com>
>> Cc: Scott Wood <oss at buserror.net>; linuxppc-dev <linuxppc-
>> dev at lists.ozlabs.org>; lkml <linux-kernel at vger.kernel.org>; X.B. Xie
>> <xiaobo.xie at nxp.com>
>> Subject: Re: [PATCH v5 2/2] QE: remove PPCisms for QE
>>
>> On Mon, Jul 25, 2016 at 12:43 AM, Zhao Qiang <qiang.zhao at nxp.com> wrote:
>> > QE was supported on PowerPC, and dependent on PPC, Now it is supported
>> > on other platforms. so remove PPCisms.
>> >
>> > Signed-off-by: Zhao Qiang <qiang.zhao at nxp.com>
>> > ---
>> > Changes for v2:
>> >         - na
>> > Changes for v3:
>> >         - add NO_IRQ
>> > Changes for v4:
>> >         - modify spin_event_timeout to opencoded timeout loop
>> >         - remove NO_IRQ
>> >         - modify virq_to_hw to opencoed code Changes for v5:
>> >         - modify commit msg
>> >         - modify depends of QUICC_ENGINE
>> >         - add kerneldoc header for qe_issue_cmd
>> >
>> >  drivers/irqchip/qe_ic.c       | 28 +++++++++------
>> >  drivers/soc/fsl/qe/Kconfig    |  2 +-
>> >  drivers/soc/fsl/qe/qe.c       | 80 ++++++++++++++++++++++++++--------------
>> ---
>> >  drivers/soc/fsl/qe/qe_io.c    | 42 ++++++++++-------------
>> >  drivers/soc/fsl/qe/qe_tdm.c   |  8 ++---
>> >  drivers/soc/fsl/qe/ucc.c      | 10 +++---
>> >  drivers/soc/fsl/qe/ucc_fast.c | 68 ++++++++++++++++++------------------
>> >  include/soc/fsl/qe/qe.h       |  1 -
>> >  include/soc/fsl/qe/qe_ic.h    | 12 +++----
>> >  9 files changed, 133 insertions(+), 118 deletions(-)
>> >
>>
>> [snip]
>>
>> > diff --git a/drivers/soc/fsl/qe/Kconfig b/drivers/soc/fsl/qe/Kconfig
>> > index 73a2e08..b26b643 100644
>> > --- a/drivers/soc/fsl/qe/Kconfig
>> > +++ b/drivers/soc/fsl/qe/Kconfig
>> > @@ -4,7 +4,7 @@
>> >
>> >  config QUICC_ENGINE
>> >         bool "Freescale QUICC Engine (QE) Support"
>> > -       depends on FSL_SOC && PPC32
>> > +       depends on OF && HAS_IOMEM
>> >         select GENERIC_ALLOCATOR
>> >         select CRC32
>> >         help
>>
>> You make it possible to build QE drivers on ARM, but the UCC_GETH fails to
>> build on arm64.  Please make sure all these drivers can build on other
>> architectures.  Or you can simply make them only build for Power architecture
>> as most of them are not available on ARM.
>>
>
> Most of them are not available on ARM and ARM64.
> Now, only qe-hdlc is available on ARM64.

Then you should update the Kconfig for these drivers too, if they are
only depending on CONFIG_QUICC_ENGINE.

Regards,
Leo