[PATCH 39/41] powerpc/64s: move __replay_interrupt function below handlers
Nicholas Piggin
npiggin at gmail.com
Wed Sep 21 17:44:05 AEST 2016
This is not an exception handler as such: it's called from
local_irq_enable(), not exception entry.
Also clean up some now redundant comments at the end of the
consolidation series.
Signed-off-by: Nicholas Piggin <npiggin at gmail.com>
---
arch/powerpc/kernel/exceptions-64s.S | 99 +++++++++++++-----------------------
1 file changed, 36 insertions(+), 63 deletions(-)
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index 9f96ec2..69a2379 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -1319,42 +1319,6 @@ USE_FIXED_SECTION(virt_trampolines)
MASKED_INTERRUPT(H)
UNUSE_FIXED_SECTION(virt_trampolines)
-/*
- * Called from arch_local_irq_enable when an interrupt needs
- * to be resent. r3 contains 0x500, 0x900, 0xa00 or 0xe80 to indicate
- * which kind of interrupt. MSR:EE is already off. We generate a
- * stackframe like if a real interrupt had happened.
- *
- * Note: While MSR:EE is off, we need to make sure that _MSR
- * in the generated frame has EE set to 1 or the exception
- * handler will not properly re-enable them.
- */
-_GLOBAL(__replay_interrupt)
- /* We are going to jump to the exception common code which
- * will retrieve various register values from the PACA which
- * we don't give a damn about, so we don't bother storing them.
- */
- mfmsr r12
- mflr r11
- mfcr r9
- ori r12,r12,MSR_EE
- cmpwi r3,0x900
- beq decrementer_common
- cmpwi r3,0x500
- beq hardware_interrupt_common
-BEGIN_FTR_SECTION
- cmpwi r3,0xe80
- beq h_doorbell_common
- cmpwi r3,0xea0
- beq h_virt_irq_common
- cmpwi r3,0xe60
- beq hmi_exception_common
-FTR_SECTION_ELSE
- cmpwi r3,0xa00
- beq doorbell_super_common
-ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE)
- blr
-
#ifdef CONFIG_KVM_BOOK3S_64_HANDLER
TRAMP_HANDLER_BEGIN(kvmppc_skip_interrupt)
/*
@@ -1383,37 +1347,10 @@ TRAMP_HANDLER_BEGIN(kvmppc_skip_Hinterrupt)
TRAMP_HANDLER_END(kvmppc_skip_Hinterrupt)
#endif
-/*
- * Ensure that any handlers that get invoked from the exception prologs
- * above are below the first 64KB (0x10000) of the kernel image because
- * the prologs assemble the addresses of these handlers using the
- * LOAD_HANDLER macro, which uses an ori instruction.
- */
-
-/*** Common interrupt handlers ***/
-
-
- /*
- * Relocation-on interrupts: A subset of the interrupts can be delivered
- * with IR=1/DR=1, if AIL==2 and MSR.HV won't be changed by delivering
- * it. Addresses are the same as the original interrupt addresses, but
- * offset by 0xc000000000004000.
- * It's impossible to receive interrupts below 0x300 via this mechanism.
- * KVM: None of these traps are from the guest ; anything that escalated
- * to HV=1 from HV=0 is delivered via real mode handlers.
- */
-
- /*
- * This uses the standard macro, since the original 0x300 vector
- * only has extra guff for STAB-based processors -- which never
- * come here.
- */
-
TRAMP_HANDLER_BEGIN(ppc64_runlatch_on_trampoline)
b __ppc64_runlatch_on
TRAMP_HANDLER_END(ppc64_runlatch_on_trampoline)
- /* Equivalents to the above handlers for relocation-on interrupt vectors */
USE_FIXED_SECTION(virt_trampolines)
/*
* The __end_interrupts marker must be past the out-of-line (OOL)
@@ -1589,3 +1526,39 @@ END_FTR_SECTION_IFSET(CPU_FTR_CFAR)
1: addi r3,r1,STACK_FRAME_OVERHEAD
bl kernel_bad_stack
b 1b
+
+/*
+ * Called from arch_local_irq_enable when an interrupt needs
+ * to be resent. r3 contains 0x500, 0x900, 0xa00 or 0xe80 to indicate
+ * which kind of interrupt. MSR:EE is already off. We generate a
+ * stackframe like if a real interrupt had happened.
+ *
+ * Note: While MSR:EE is off, we need to make sure that _MSR
+ * in the generated frame has EE set to 1 or the exception
+ * handler will not properly re-enable them.
+ */
+_GLOBAL(__replay_interrupt)
+ /* We are going to jump to the exception common code which
+ * will retrieve various register values from the PACA which
+ * we don't give a damn about, so we don't bother storing them.
+ */
+ mfmsr r12
+ mflr r11
+ mfcr r9
+ ori r12,r12,MSR_EE
+ cmpwi r3,0x900
+ beq decrementer_common
+ cmpwi r3,0x500
+ beq hardware_interrupt_common
+BEGIN_FTR_SECTION
+ cmpwi r3,0xe80
+ beq h_doorbell_common
+ cmpwi r3,0xea0
+ beq h_virt_irq_common
+ cmpwi r3,0xe60
+ beq hmi_exception_common
+FTR_SECTION_ELSE
+ cmpwi r3,0xa00
+ beq doorbell_super_common
+ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE)
+ blr
--
2.9.3
More information about the Linuxppc-dev
mailing list