[PATCH v6 4/7] perf annotate: Do not ignore call instruction with indirect target

[Arnaldo Carvalho de Melo]

Em Tue, Sep 20, 2016 at 08:05:03PM +0530, Ravi Bangoria escreveu:
> On Monday 19 September 2016 09:14 PM, Arnaldo Carvalho de Melo wrote:
> > Em Fri, Aug 19, 2016 at 06:29:35PM +0530, Ravi Bangoria escreveu:
> >> Do not ignore call instruction with indirect target when its already
> >> identified as a call. This is an extension of commit e8ea1561952b
> >> ("perf annotate: Use raw form for register indirect call instructions")
> >> to generalize annotation for all instructions with indirect calls.

> >> This is needed for certain powerpc call instructions that use address
> >> in a register (such as bctrl, btarl, ...).
> >>
> >> Apart from that, when kcore is used to disassemble function, all call
> >> instructions were ignored. This patch will fix it as a side effect by
> >> not ignoring them. For example,
> >>
> >> Before (with kcore):
> >>        mov    %r13,%rdi
> >>        callq  0xffffffff811a7e70
> >>      ^ jmpq   64
> >>        mov    %gs:0x7ef41a6e(%rip),%al
> >>
> >> After (with kcore):
> >>        mov    %r13,%rdi
> >>      > callq  0xffffffff811a7e70
> >>      ^ jmpq   64
> >>        mov    %gs:0x7ef41a6e(%rip),%al
> > Ok, makes sense, but then now I have the -> and can't press enter to go
> > to that function, in fact for the case I'm using as a test, the
> > vsnprintf kernel function, I get:
> >
> >        │ 56:   test   %al,%al
> >        │     ↓ je     81
> >        │       lea    -0x38(%rbp),%rsi
> >        │       mov    %r15,%rdi
> >        │     → callq  0xffffffff993e3230 
> >
> > That 0xffffffff993e3230 should've been resolved to:
> >
> > [root at jouet ~]# grep ffffffff993e3230 /proc/kallsyms 
> > ffffffff993e3230 t format_decode
> >
> > Trying to investigate why it doesn't...
> 
> I investigated this.
> 
> If this example is with kcore, then it's expected. Because, perf annotate does
> not inspect kallsyms when it can't find symbol name from disassembly itself.
> 
> For example, disassembly of  finish_task_switch,

Yeah, that was the case, up to yesterday, please take a look at my
perf/core branch, specifically this patch:

https://git.kernel.org/cgit/linux/kernel/git/acme/linux.git/commit/?id=4de86ebeb433aa59764a13ce851cba08d747e0e1

I'll do that for other instructions as well, like with 'mov
$0xabcdef,%rax' that will try to resolve that address to a variable.

Will try to continue processing your (and others) patches first tho :-)

- Arnaldo
 
> with kcore:
> 
> ffffffff810cf1b0:       mov    $0x1,%esi
> ffffffff810cf1b5:       mov    $0x4,%edi
> ffffffff810cf1ba:       callq  0xffffffff811aced0
> ffffffff810cf1bf:       andb   $0xfb,0x4c4(%rbx)
> ffffffff810cf1c6:       jmpq   0xffffffff810cf0e9
> ffffffff810cf1cb:       mov    %rbx,%rsi
> ffffffff810cf1ce:       mov    %r13,%rdi
> ffffffff810cf1d1:       callq  0xffffffff811a7e70
> ffffffff810cf1d6:       jmpq   0xffffffff810cf0e4
> 
> with debuginfo:
 
> ffffffff810cf1b0:       mov    $0x1,%esi
> ffffffff810cf1b5:       mov    $0x4,%edi
> ffffffff810cf1ba:       callq  ffffffff811aced0 <___perf_sw_event>
> ffffffff810cf1bf:       andb   $0xfb,0x4c4(%rbx)
> ffffffff810cf1c6:       jmpq   ffffffff810cf0e9 <finish_task_switch+0x69>
> ffffffff810cf1cb:       mov    %rbx,%rsi
> ffffffff810cf1ce:       mov    %r13,%rdi
> ffffffff810cf1d1:       callq  ffffffff811a7e70 <__perf_event_task_sched_in>
> ffffffff810cf1d6:       jmpq   ffffffff810cf0e4 <finish_task_switch+0x64>
> 
> call__parse tries to find symbol from angle brackets which is not present
> in case of kcore.
> 
> -Ravi
> 
> 
> > - Arnaldo
> >
> >> Suggested-by: Michael Ellerman <mpe at ellerman.id.au>
> >> [Suggested about 'bctrl' instruction]
> >> Signed-off-by: Ravi Bangoria <ravi.bangoria at linux.vnet.ibm.com>
> >> ---
> >> Changes in v6:
> >>   - No change
> >>
> >>  tools/perf/util/annotate.c | 8 ++------
> >>  1 file changed, 2 insertions(+), 6 deletions(-)
> >>
> >> diff --git a/tools/perf/util/annotate.c b/tools/perf/util/annotate.c
> >> index ea07588..a05423b 100644
> >> --- a/tools/perf/util/annotate.c
> >> +++ b/tools/perf/util/annotate.c
> >> @@ -81,16 +81,12 @@ static int call__parse(struct ins_operands *ops, const char *norm_arch)
> >>  	return ops->target.name == NULL ? -1 : 0;
> >>  
> >>  indirect_call:
> >> -	tok = strchr(endptr, '(');
> >> -	if (tok != NULL) {
> >> +	tok = strchr(endptr, '*');
> >> +	if (tok == NULL) {
> >>  		ops->target.addr = 0;
> >>  		return 0;
> >>  	}
> >>  
> >> -	tok = strchr(endptr, '*');
> >> -	if (tok == NULL)
> >> -		return -1;
> >> -
> >>  	ops->target.addr = strtoull(tok + 1, NULL, 16);
> >>  	return 0;
> >>  }
> >> -- 
> >> 2.5.5