[PATCH v2] powernv: Handle wakeup from idle due to SRESET
Gautham R. Shenoy
ego at linux.vnet.ibm.com
Wed Nov 23 04:36:32 AEDT 2016
From: "Gautham R. Shenoy" <ego at linux.vnet.ibm.com>
The existing code doesn't handle the case when CPU which was in a
hardware-idle state (nap,sleep,winkle on POWER8 and various stop
states on POWER9) gets woken up due to a System Reset interrupt.
This patch checks if the CPU was woken up due to System Reset, in
which case, after restoring the required hardware state, it jumps to
the system reset handler.
Signed-off-by: Gautham R. Shenoy <ego at linux.vnet.ibm.com>
---
v1 -> v2: Set r9,r11,r12 to CR,SRR0,SRR1 values
before jumping to system_reset_common as expected by
EXCEPTION_PROLOG_COMMON
arch/powerpc/kernel/idle_book3s.S | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/arch/powerpc/kernel/idle_book3s.S b/arch/powerpc/kernel/idle_book3s.S
index 72dac0b..06afe0e 100644
--- a/arch/powerpc/kernel/idle_book3s.S
+++ b/arch/powerpc/kernel/idle_book3s.S
@@ -353,6 +353,22 @@ ALT_FTR_SECTION_END_NESTED_IFSET(CPU_FTR_ARCH_207S, 66); \
ld r3,ORIG_GPR3(r1); /* Restore original r3 */ \
20: nop;
+#define CHECK_SRESET_INTERRUPT \
+BEGIN_FTR_SECTION_NESTED(67); \
+ mfspr r0,SPRN_SRR1; \
+ rlwinm r0,r0,45-31,0xf; /* Extract wake reason field (P8,9) */ \
+ cmpwi r0,0x4; /* System Reset ? */ \
+ bne 21f; \
+ ld r1,PACAR1(r13); \
+ ld r9,_CCR(r1); \
+ ld r11,_NIP(r1); \
+ mfspr r12, SPRN_SRR1; \
+ b system_reset_common ; \
+ b .; /* We shouldn't return here */ \
+FTR_SECTION_ELSE_NESTED(67); \
+ nop ; \
+ALT_FTR_SECTION_END_NESTED_IFSET(CPU_FTR_ARCH_207S, 67); \
+21: nop;
/*
* r3 - requested stop state
@@ -644,6 +660,7 @@ _GLOBAL(pnv_wakeup_loss)
ld r1,PACAR1(r13)
BEGIN_FTR_SECTION
CHECK_HMI_INTERRUPT
+ CHECK_SRESET_INTERRUPT
END_FTR_SECTION_IFSET(CPU_FTR_HVMODE)
REST_NVGPRS(r1)
REST_GPR(2, r1)
@@ -666,6 +683,7 @@ _GLOBAL(pnv_wakeup_noloss)
bne pnv_wakeup_loss
BEGIN_FTR_SECTION
CHECK_HMI_INTERRUPT
+ CHECK_SRESET_INTERRUPT
END_FTR_SECTION_IFSET(CPU_FTR_HVMODE)
ld r1,PACAR1(r13)
ld r6,_CCR(r1)
--
1.8.3.1
More information about the Linuxppc-dev
mailing list