[PATCH 02/13] powerpc/64: Provide functions for accessing POWER9 partition table

[Paul Mackerras]

On Sat, Nov 19, 2016 at 12:05:21PM +0530, Aneesh Kumar K.V wrote:
> Paul Mackerras <paulus at ozlabs.org> writes:
> 
> > On Fri, Nov 18, 2016 at 07:57:30PM +0530, Aneesh Kumar K.V wrote:
> >> Paul Mackerras <paulus at ozlabs.org> writes:
> >>  +
> >> > +	/* Global flush of TLBs and partition table caches for this lpid */
> >> > +	asm volatile("ptesync");
> >> > +	asm volatile(PPC_TLBIE_5(%0,%1,2,0,0) : : "r"(0x800), "r" (lpid));
> >> > +	asm volatile("eieio; tlbsync; ptesync" : : : "memory");
> >> > +}
> >> 
> >> 
> >> It would be nice to convert that 0x800 to a documented IS value or better use
> >> radix__flush_tlb_pid() ?
> >
> > Well, not radix__flush_tlb_pid - this isn't radix and it isn't a PID
> > flush.  I could use TLBIEL_INVAL_SET_LPID except the name implies it's
> > for tlbiel and this is a tlbie.
> >
> 
> I wrote that wrong, we really don't have tlb_pid() what we have is tlb_lpid().
> 
> void radix__flush_tlb_lpid(unsigned long lpid)
> {
> 	unsigned long rb,rs,prs,r;
> 	unsigned long ric = RIC_FLUSH_ALL;
> 
> 	rb = 0x2 << PPC_BITLSHIFT(53); /* IS = 2 */
> 	rs = lpid & ((1UL << 32) - 1);
> 	prs = 0; /* partition scoped */
> 	r = 1;   /* raidx format */
> 
> 	asm volatile("ptesync": : :"memory");
> 	asm volatile(PPC_TLBIE_5(%0, %4, %3, %2, %1)
> 		     : : "r"(rb), "i"(r), "i"(prs), "i"(ric), "r"(rs) : "memory");
> 	asm volatile("eieio; tlbsync; ptesync": : :"memory");
> }

That has R=1, I'm using R=0.

Paul.