[Patch v7 2/7] irqchip: xilinx: clean up print messages

[Michal Simek]

On 14.11.2016 13:13, Zubair Lutfullah Kakakhel wrote:
> Remove __func__ and prefix irq-xilinx in various debug prints
> 
> Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel at imgtec.com>
> 
> ---
> V6 -> V7
> New patch
> This diff was squashed into another patch. Split it up for cleanliness
> ---
>  drivers/irqchip/irq-xilinx-intc.c | 18 +++++++++---------
>  1 file changed, 9 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/irqchip/irq-xilinx-intc.c b/drivers/irqchip/irq-xilinx-intc.c
> index 90bec7d..096c1ed 100644
> --- a/drivers/irqchip/irq-xilinx-intc.c
> +++ b/drivers/irqchip/irq-xilinx-intc.c
> @@ -58,7 +58,7 @@ static void intc_enable_or_unmask(struct irq_data *d)
>  {
>  	unsigned long mask = 1 << d->hwirq;
>  
> -	pr_debug("enable_or_unmask: %ld\n", d->hwirq);
> +	pr_debug("irq-xilinx: enable_or_unmask: %ld\n", d->hwirq);
>  
>  	/* ack level irqs because they can't be acked during
>  	 * ack function since the handle_level_irq function
> @@ -72,13 +72,13 @@ static void intc_enable_or_unmask(struct irq_data *d)
>  
>  static void intc_disable_or_mask(struct irq_data *d)
>  {
> -	pr_debug("disable: %ld\n", d->hwirq);
> +	pr_debug("irq-xilinx: disable: %ld\n", d->hwirq);
>  	write_fn(1 << d->hwirq, intc_baseaddr + CIE);
>  }
>  
>  static void intc_ack(struct irq_data *d)
>  {
> -	pr_debug("ack: %ld\n", d->hwirq);
> +	pr_debug("irq-xilinx: ack: %ld\n", d->hwirq);
>  	write_fn(1 << d->hwirq, intc_baseaddr + IAR);
>  }
>  
> @@ -86,7 +86,7 @@ static void intc_mask_ack(struct irq_data *d)
>  {
>  	unsigned long mask = 1 << d->hwirq;
>  
> -	pr_debug("disable_and_ack: %ld\n", d->hwirq);
> +	pr_debug("irq-xilinx: disable_and_ack: %ld\n", d->hwirq);
>  	write_fn(mask, intc_baseaddr + CIE);
>  	write_fn(mask, intc_baseaddr + IAR);
>  }
> @@ -109,7 +109,7 @@ unsigned int get_irq(void)
>  	if (hwirq != -1U)
>  		irq = irq_find_mapping(root_domain, hwirq);
>  
> -	pr_debug("get_irq: hwirq=%d, irq=%d\n", hwirq, irq);
> +	pr_debug("irq-xilinx: hwirq=%d, irq=%d\n", hwirq, irq);
>  
>  	return irq;
>  }
> @@ -146,20 +146,20 @@ static int __init xilinx_intc_of_init(struct device_node *intc,
>  
>  	ret = of_property_read_u32(intc, "xlnx,num-intr-inputs", &nr_irq);
>  	if (ret < 0) {
> -		pr_err("%s: unable to read xlnx,num-intr-inputs\n", __func__);
> +		pr_err("irq-xilinx: unable to read xlnx,num-intr-inputs\n");
>  		return ret;
>  	}
>  
>  	ret = of_property_read_u32(intc, "xlnx,kind-of-intr", &intr_mask);
>  	if (ret < 0) {
> -		pr_err("%s: unable to read xlnx,kind-of-intr\n", __func__);
> +		pr_err("irq-xilinx: unable to read xlnx,kind-of-intr\n");
>  		return ret;
>  	}
>  
>  	if (intr_mask >> nr_irq)
> -		pr_warn("%s: mismatch in kind-of-intr param\n", __func__);
> +		pr_warn("irq-xilinx: mismatch in kind-of-intr param\n");
>  
> -	pr_info("%s: num_irq=%d, edge=0x%x\n",
> +	pr_info("irq-xilinx: %s: num_irq=%d, edge=0x%x\n",
>  		intc->full_name, nr_irq, intr_mask);
>  
>  	write_fn = intc_write32;
> 

Acked-by: Michal Simek <michal.simek at xilinx.com>

Thanks,
Michal