[powerpc v4 1/3] Setup AMOR in HV mode

[Michael Ellerman]

Balbir Singh <bsingharora at gmail.com> writes:

> diff --git a/arch/powerpc/mm/pgtable-radix.c b/arch/powerpc/mm/pgtable-radix.c
> index ed7bddc..7343573 100644
> --- a/arch/powerpc/mm/pgtable-radix.c
> +++ b/arch/powerpc/mm/pgtable-radix.c
> @@ -320,6 +320,25 @@ static void update_hid_for_radix(void)
>  		cpu_relax();
>  }
>  
> +/*
> + * In HV mode, we init AMOR so that the hypervisor
> + * and guest can setup IMAR, enable key 0 and set
> + * it to 1
> + * AMOR = 1100....00 (Mask for key 0 is 11)
> + */
> +static void __init radix_init_amor(void)

This can't be __init because you call it from the secondary version,
which can run after init due to CPU hotplug.

> +{
> +	unsigned long amor_mask = 0xc000000000000000;
> +	unsigned long amor = mfspr(SPRN_AMOR);

You don't use the amor value.

> +	if (cpu_has_feature(CPU_FTR_POWER9_DD1))
> +		return;

This needs a comment explaining why we're not doing it on DD1.

> +
> +	amor = amor_mask;
> +
> +	mtspr(SPRN_AMOR, amor);

Just move the constant directly.



cheers