[PATCH 1/3] powerpc: Emulation support for load/store instructions on LE

[Anton Blanchard]

Hi Ravi,

> emulate_step() uses a number of underlying kernel functions that were
> initially not enabled for LE. This has been rectified since. So, fix
> emulate_step() for LE for the corresponding instructions.

Thanks. Should this be queued up for stable?

Anton

> Reported-by: Anton Blanchard <anton at samba.org>
> Signed-off-by: Ravi Bangoria <ravi.bangoria at linux.vnet.ibm.com>
> ---
>  arch/powerpc/lib/sstep.c | 20 --------------------
>  1 file changed, 20 deletions(-)
> 
> diff --git a/arch/powerpc/lib/sstep.c b/arch/powerpc/lib/sstep.c
> index 3362299..6ca3b90 100644
> --- a/arch/powerpc/lib/sstep.c
> +++ b/arch/powerpc/lib/sstep.c
> @@ -1807,8 +1807,6 @@ int __kprobes emulate_step(struct pt_regs
> *regs, unsigned int instr) goto instr_done;
>  
>  	case LARX:
> -		if (regs->msr & MSR_LE)
> -			return 0;
>  		if (op.ea & (size - 1))
>  			break;		/* can't handle
> misaligned */ err = -EFAULT;
> @@ -1832,8 +1830,6 @@ int __kprobes emulate_step(struct pt_regs
> *regs, unsigned int instr) goto ldst_done;
>  
>  	case STCX:
> -		if (regs->msr & MSR_LE)
> -			return 0;
>  		if (op.ea & (size - 1))
>  			break;		/* can't handle
> misaligned */ err = -EFAULT;
> @@ -1859,8 +1855,6 @@ int __kprobes emulate_step(struct pt_regs
> *regs, unsigned int instr) goto ldst_done;
>  
>  	case LOAD:
> -		if (regs->msr & MSR_LE)
> -			return 0;
>  		err = read_mem(&regs->gpr[op.reg], op.ea, size,
> regs); if (!err) {
>  			if (op.type & SIGNEXT)
> @@ -1872,8 +1866,6 @@ int __kprobes emulate_step(struct pt_regs
> *regs, unsigned int instr) 
>  #ifdef CONFIG_PPC_FPU
>  	case LOAD_FP:
> -		if (regs->msr & MSR_LE)
> -			return 0;
>  		if (size == 4)
>  			err = do_fp_load(op.reg, do_lfs, op.ea,
> size, regs); else
> @@ -1882,15 +1874,11 @@ int __kprobes emulate_step(struct pt_regs
> *regs, unsigned int instr) #endif
>  #ifdef CONFIG_ALTIVEC
>  	case LOAD_VMX:
> -		if (regs->msr & MSR_LE)
> -			return 0;
>  		err = do_vec_load(op.reg, do_lvx, op.ea & ~0xfUL,
> regs); goto ldst_done;
>  #endif
>  #ifdef CONFIG_VSX
>  	case LOAD_VSX:
> -		if (regs->msr & MSR_LE)
> -			return 0;
>  		err = do_vsx_load(op.reg, do_lxvd2x, op.ea, regs);
>  		goto ldst_done;
>  #endif
> @@ -1913,8 +1901,6 @@ int __kprobes emulate_step(struct pt_regs
> *regs, unsigned int instr) goto instr_done;
>  
>  	case STORE:
> -		if (regs->msr & MSR_LE)
> -			return 0;
>  		if ((op.type & UPDATE) && size == sizeof(long) &&
>  		    op.reg == 1 && op.update_reg == 1 &&
>  		    !(regs->msr & MSR_PR) &&
> @@ -1927,8 +1913,6 @@ int __kprobes emulate_step(struct pt_regs
> *regs, unsigned int instr) 
>  #ifdef CONFIG_PPC_FPU
>  	case STORE_FP:
> -		if (regs->msr & MSR_LE)
> -			return 0;
>  		if (size == 4)
>  			err = do_fp_store(op.reg, do_stfs, op.ea,
> size, regs); else
> @@ -1937,15 +1921,11 @@ int __kprobes emulate_step(struct pt_regs
> *regs, unsigned int instr) #endif
>  #ifdef CONFIG_ALTIVEC
>  	case STORE_VMX:
> -		if (regs->msr & MSR_LE)
> -			return 0;
>  		err = do_vec_store(op.reg, do_stvx, op.ea & ~0xfUL,
> regs); goto ldst_done;
>  #endif
>  #ifdef CONFIG_VSX
>  	case STORE_VSX:
> -		if (regs->msr & MSR_LE)
> -			return 0;
>  		err = do_vsx_store(op.reg, do_stxvd2x, op.ea, regs);
>  		goto ldst_done;
>  #endif