[PATCH] Fix loading of module radeonfb on PowerMac

Tomi Valkeinen tomi.valkeinen at ti.com
Wed Nov 2 19:28:55 AEDT 2016


On 08/10/16 15:09, Mathieu Malaterre wrote:
> When the linux kernel is build with (typical kernel ship with Debian
> installer):
> 
> CONFIG_FB_OF=y
> CONFIG_VT_HW_CONSOLE_BINDING=y
> CONFIG_FB_RADEON=m
> 
> The offb driver takes precedence over module radeonfb. It is then
> impossible to load the module, error reported is:
> 
> [   96.551486] radeonfb 0000:00:10.0: enabling device (0006 -> 0007)
> [   96.551526] radeonfb 0000:00:10.0: BAR 0: can't reserve [mem 0x98000000-0x9fffffff pref]
> [   96.551531] radeonfb (0000:00:10.0): cannot request region 0.
> [   96.551545] radeonfb: probe of 0000:00:10.0 failed with error -16
> 
> This patch reproduce the behavior of the module radeon, so as to make it
> possible to load radeonfb when offb is first loaded.
> 
> It should be noticed that `offb_destroy` is never called which explain the
> need to skip error detection on the radeon side.

Why is that? It sounds rather bad if two drivers claim the same resources.

 Tomi

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: OpenPGP digital signature
URL: <http://lists.ozlabs.org/pipermail/linuxppc-dev/attachments/20161102/8440d14d/attachment.sig>


More information about the Linuxppc-dev mailing list