[PATCH] usb: dwc2: fix regression on big-endian PowerPC/ARM systems

[Felipe Balbi]

Hi,

Arnd Bergmann <arnd at arndb.de> writes:
> A patch that went into Linux-4.4 to fix big-endian mode on a Lantiq
> MIPS system unfortunately broke big-endian operation on PowerPC
> APM82181 as reported by Christian Lamparter, and likely other
> systems.
>
> It actually introduced multiple issues:
>
> - it broke big-endian ARM kernels: any machine that was working
>   correctly with a little-endian kernel is no longer using byteswaps
>   on big-endian kernels, which clearly breaks them.
> - On PowerPC the same thing must be true: if it was working before,
>   using big-endian kernels is now broken. Unlike ARM, 32-bit PowerPC
>   usually uses big-endian kernels, so they are likely all broken.
> - The barrier for dwc2_writel is on the wrong side of the __raw_writel(),
>   so the MMIO no longer synchronizes with DMA operations.
> - On architectures that require specific CPU instructions for MMIO
>   access, using the __raw_ variant may turn this into a pointer
>   dereference that does not have the same effect as the readl/writel.
>
> This patch is a simple revert for all architectures other than MIPS,
> in the hope that we can more easily backport it to fix the regression
> on PowerPC and ARM systems without breaking the Lantiq system again.
>
> We should follow this up with a more elaborate change to add runtime
> detection of endianess, to make sure it also works on all other
> combinations of architectures and implementations of the usb-dwc2
> device. That patch however will be fairly large and not appropriate
> for backports to stable kernels.
>
> Signed-off-by: Arnd Bergmann <arnd at arndb.de>
> Fixes: 95c8bc360944 ("usb: dwc2: Use platform endianness when accessing registers")
> ---
>  drivers/usb/dwc2/core.h | 41 +++++++++++++++++++++++++++++++++++------
>  1 file changed, 35 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
> index 3c58d633ce80..1f8ed149a40f 100644
> --- a/drivers/usb/dwc2/core.h
> +++ b/drivers/usb/dwc2/core.h
> @@ -64,12 +64,24 @@
>  	DWC2_TRACE_SCHEDULER_VB(pr_fmt("%s: SCH: " fmt),		\
>  				dev_name(hsotg->dev), ##__VA_ARGS__)
>  
> +
> +#ifdef CONFIG_MIPS
> +/*
> + * There are some MIPS machines that can run in either big-endian
> + * or little-endian mode and that use the dwc2 register without
> + * a byteswap in both ways.
> + * Unlike other architectures, MIPS does not require a barrier
> + * before the __raw_writel() to synchronize with DMA but does
> + * require the barrier after the writel() to serialize a series
> + * of writes. This set of operations was added specifically for
> + * MIPS and should only be used there.
> + */
>  static inline u32 dwc2_readl(const void __iomem *addr)
>  {
>  	u32 value = __raw_readl(addr);
>  
> -	/* In order to preserve endianness __raw_* operation is used. Therefore
> -	 * a barrier is needed to ensure IO access is not re-ordered across
> +	/* in order to preserve endianness __raw_* operation is used. therefore
> +	 * a barrier is needed to ensure io access is not re-ordered across
>  	 * reads or writes
>  	 */
>  	mb();
> @@ -81,15 +93,32 @@ static inline void dwc2_writel(u32 value, void __iomem *addr)
>  	__raw_writel(value, addr);
>  
>  	/*
> -	 * In order to preserve endianness __raw_* operation is used. Therefore
> -	 * a barrier is needed to ensure IO access is not re-ordered across
> +	 * in order to preserve endianness __raw_* operation is used. therefore
> +	 * a barrier is needed to ensure io access is not re-ordered across
>  	 * reads or writes
>  	 */
>  	mb();
> -#ifdef DWC2_LOG_WRITES
> -	pr_info("INFO:: wrote %08x to %p\n", value, addr);
> +#ifdef dwc2_log_writes
> +	pr_info("info:: wrote %08x to %p\n", value, addr);
>  #endif
>  }
> +#else

I still think this is something that should be handled at MIPS side, no ?

How many more drivers will we have to 'fix' like this ?

-- 
balbi