[PATCH] kvm-pr: manage illegal instructions

[Alexander Graf]

On 05/12/2016 11:10 AM, Laurent Vivier wrote:
>
> On 11/05/2016 13:49, Alexander Graf wrote:
>> On 05/11/2016 01:14 PM, Laurent Vivier wrote:
>>> On 11/05/2016 12:35, Alexander Graf wrote:
>>>> On 03/15/2016 09:18 PM, Laurent Vivier wrote:
>>>>> While writing some instruction tests for kvm-unit-tests for powerpc,
>>>>> I've found that illegal instructions are not managed correctly with
>>>>> kvm-pr,
>>>>> while it is fine with kvm-hv.
>>>>>
>>>>> When an illegal instruction (like ".long 0") is processed by kvm-pr,
>>>>> the kernel logs are filled with:
>>>>>
>>>>>         Couldn't emulate instruction 0x00000000 (op 0 xop 0)
>>>>>         kvmppc_handle_exit_pr: emulation at 700 failed (00000000)
>>>>>
>>>>> While the exception handler receives an interrupt for each instruction
>>>>> executed after the illegal instruction.
>>>>>
>>>>> Signed-off-by: Laurent Vivier <lvivier at redhat.com>
>>>>> ---
>>>>>     arch/powerpc/kvm/book3s_emulate.c | 4 +++-
>>>>>     1 file changed, 3 insertions(+), 1 deletion(-)
>>>>>
>>>>> diff --git a/arch/powerpc/kvm/book3s_emulate.c
>>>>> b/arch/powerpc/kvm/book3s_emulate.c
>>>>> index 2afdb9c..4ee969d 100644
>>>>> --- a/arch/powerpc/kvm/book3s_emulate.c
>>>>> +++ b/arch/powerpc/kvm/book3s_emulate.c
>>>>> @@ -99,7 +99,6 @@ int kvmppc_core_emulate_op_pr(struct kvm_run *run,
>>>>> struct kvm_vcpu *vcpu,
>>>>>           switch (get_op(inst)) {
>>>>>         case 0:
>>>>> -        emulated = EMULATE_FAIL;
>>>>>             if ((kvmppc_get_msr(vcpu) & MSR_LE) &&
>>>>>                 (inst == swab32(inst_sc))) {
>>>>>                 /*
>>>>> @@ -112,6 +111,9 @@ int kvmppc_core_emulate_op_pr(struct kvm_run *run,
>>>>> struct kvm_vcpu *vcpu,
>>>>>                 kvmppc_set_gpr(vcpu, 3, EV_UNIMPLEMENTED);
>>>>>                 kvmppc_set_pc(vcpu, kvmppc_get_pc(vcpu) + 4);
>>>>>                 emulated = EMULATE_DONE;
>>>>> +        } else {
>>>>> +            kvmppc_core_queue_program(vcpu, SRR1_PROGILL);
>>>> But isn't that exactly what the semantic of EMULATE_FAIL is? Fixing it
>>>> up in book3s_emulate.c is definitely the wrong spot.
>>>>
>>>> So what is the problem you're trying to solve? Is the SRR0 at the wrong
>>>> spot or are the log messages the problem?
>>> No, the problem is the host kernel logs are filled by the message and
>>> the execution hangs. And the host becomes unresponsiveness, even after
>>> the end of the tests.
>>>
>>> Please, try to run kvm-unit-tests (the emulator test) on a KVM-PR host,
>>> and check the kernel logs (dmesg), then try to ssh to the host...
>> Ok, so the log messages are the problem. Please fix the message output
>> then - or remove it altogether. Or if you like, create a module
>> parameter that allows you to emit them.
>>
>> I personally think the best solution would be to just convert the
>> message into a trace point.
>>
>> While at it, please see whether the guest can trigger similar host log
>> output excess in other code paths.
> The problem is not really with the log messages: they are consequence of
> the bug I try to fix.
>
> What happens is once kvm_pr decodes an invalid instruction all the valid
> following instructions trigger a Program exception to the guest (but are
> executed correctly). It has no real consequence on big machine like
> POWER8, except that the guest become very slow and the log files of the
> host are filled with messages (and qemu uses 100% of the CPU). On a
> smaller machine like a  PowerMac G5, the machine becomes simply unusable.

It's probably more related to your verbosity level of kernel messages. 
If you pass loglevel=0 (or quiet) to you kernel cmdline you won't get 
the messages printed to serial which is what's slowing you down.

The other problem sounds pretty severe, but the only thing your patch 
does any different from the current code flow would be the patch below. 
Or did I miss anything?

diff --git a/arch/powerpc/kvm/emulate.c b/arch/powerpc/kvm/emulate.c
index 5cc2e7a..4672bc2 100644
--- a/arch/powerpc/kvm/emulate.c
+++ b/arch/powerpc/kvm/emulate.c
@@ -302,7 +302,11 @@ int kvmppc_emulate_instruction(struct kvm_run *run, 
struct kvm_vcpu *vcpu)
                         advance = 0;
                         printk(KERN_ERR "Couldn't emulate instruction 
0x%08x "
                                "(op %d xop %d)\n", inst, get_op(inst), 
get_xop(inst));
+#ifdef CONFIG_PPC_BOOK3S
+                       kvmppc_core_queue_program(vcpu, SRR1_PROGILL);
+#else
                         kvmppc_core_queue_program(vcpu, 0);
+#endif
                 }
         }