[PATCH v1 1/1] powerpc/86xx: Fix PCI interrupt map definition

Alessio Igor Bogani alessio.bogani at elettra.eu
Tue May 3 22:31:18 AEST 2016


Fix PCI interrupt map definition from 2 to 4 cells. Move
interrupt-map and interrupt-map-mask and clone interrupts
into the pcie child nodes.

Signed-off-by: Alessio Igor Bogani <alessio.bogani at elettra.eu>
---
This patch requires https://lists.ozlabs.org/pipermail/linuxppc-dev/2016-April/141980.html
to be applied cleanly.

 arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi | 32 +++++++++++++--------------
 1 file changed, 16 insertions(+), 16 deletions(-)

diff --git a/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi
index a76ffda..eeb7c65 100644
--- a/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi
@@ -102,14 +102,6 @@
 	bus-range = <0x0 0xff>;
 	clock-frequency = <100000000>;
 	interrupts = <24 2 0 0>;
-	interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-
-	interrupt-map = <
-		0x0000 0x0 0x0 0x1 &mpic 0x0 0x1
-		0x0000 0x0 0x0 0x2 &mpic 0x1 0x1
-		0x0000 0x0 0x0 0x3 &mpic 0x2 0x1
-		0x0000 0x0 0x0 0x4 &mpic 0x3 0x1
-		>;
 
 	pcie at 0 {
 		reg = <0 0 0 0 0>;
@@ -117,6 +109,14 @@
 		#size-cells = <2>;
 		#address-cells = <3>;
 		device_type = "pci";
+		interrupts = <24 2 0 0>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+			0x0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+			0x0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+			0x0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+			0x0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+			>;
 	};
 };
 
@@ -128,14 +128,6 @@
 	bus-range = <0x0 0xff>;
 	clock-frequency = <100000000>;
 	interrupts = <25 2 0 0>;
-	interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-
-	interrupt-map = <
-		0x0000 0x0 0x0 0x1 &mpic 0x4 0x1
-		0x0000 0x0 0x0 0x2 &mpic 0x5 0x1
-		0x0000 0x0 0x0 0x3 &mpic 0x6 0x1
-		0x0000 0x0 0x0 0x4 &mpic 0x7 0x1
-		>;
 
 	pcie at 0 {
 		reg = <0 0 0 0 0>;
@@ -143,5 +135,13 @@
 		#size-cells = <2>;
 		#address-cells = <3>;
 		device_type = "pci";
+		interrupts = <25 2 0 0>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+			0x0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
+			0x0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
+			0x0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
+			0x0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
+			>;
 	};
 };
-- 
2.8.2



More information about the Linuxppc-dev mailing list