[PATCH] powerpc/mm/radix: fix STD_MMU_64 typo

Aneesh Kumar K.V aneesh.kumar at linux.vnet.ibm.com
Tue May 3 19:13:48 AEST 2016


Valentin Rothberg <valentinrothberg at gmail.com> writes:

> s/MMU_STD_64/STD_MMU_64/
>
> Fixes: 11ffc1cfa4c2 ("powerpc/mm/radix: Use STD_MMU_64 to properly
>                       isolate hash related code")
> Signed-off-by: Valentin Rothberg <valentinrothberg at gmail.com>

Reviewed-by: Aneesh Kumar K.V <aneesh.kumar at linux.vnet.ibm.com>

> ---
>
> I only compile tested this change.  The issue has been detected with
> scripts/checkkconfigsymbols.py
>
>  arch/powerpc/kernel/mce_power.c | 10 +++++-----
>  1 file changed, 5 insertions(+), 5 deletions(-)
>
> diff --git a/arch/powerpc/kernel/mce_power.c b/arch/powerpc/kernel/mce_power.c
> index bec70338672e..7353991c4ece 100644
> --- a/arch/powerpc/kernel/mce_power.c
> +++ b/arch/powerpc/kernel/mce_power.c
> @@ -80,7 +80,7 @@ void __flush_tlb_power9(unsigned int action)
>
>
>  /* flush SLBs and reload */
> -#ifdef CONFIG_PPC_MMU_STD_64
> +#ifdef CONFIG_PPC_STD_MMU_64
>  static void flush_and_reload_slb(void)
>  {
>  	struct slb_shadow *slb;
> @@ -125,7 +125,7 @@ static long mce_handle_derror(uint64_t dsisr, uint64_t slb_error_bits)
>  	 * reset the error bits whenever we handle them so that at the end
>  	 * we can check whether we handled all of them or not.
>  	 * */
> -#ifdef CONFIG_PPC_MMU_STD_64
> +#ifdef CONFIG_PPC_STD_MMU_64
>  	if (dsisr & slb_error_bits) {
>  		flush_and_reload_slb();
>  		/* reset error bits */
> @@ -157,7 +157,7 @@ static long mce_handle_common_ierror(uint64_t srr1)
>  	switch (P7_SRR1_MC_IFETCH(srr1)) {
>  	case 0:
>  		break;
> -#ifdef CONFIG_PPC_MMU_STD_64
> +#ifdef CONFIG_PPC_STD_MMU_64
>  	case P7_SRR1_MC_IFETCH_SLB_PARITY:
>  	case P7_SRR1_MC_IFETCH_SLB_MULTIHIT:
>  		/* flush and reload SLBs for SLB errors. */
> @@ -184,7 +184,7 @@ static long mce_handle_ierror_p7(uint64_t srr1)
>
>  	handled = mce_handle_common_ierror(srr1);
>
> -#ifdef CONFIG_PPC_MMU_STD_64
> +#ifdef CONFIG_PPC_STD_MMU_64
>  	if (P7_SRR1_MC_IFETCH(srr1) == P7_SRR1_MC_IFETCH_SLB_BOTH) {
>  		flush_and_reload_slb();
>  		handled = 1;
> @@ -332,7 +332,7 @@ static long mce_handle_ierror_p8(uint64_t srr1)
>
>  	handled = mce_handle_common_ierror(srr1);
>
> -#ifdef CONFIG_PPC_MMU_STD_64
> +#ifdef CONFIG_PPC_STD_MMU_64
>  	if (P7_SRR1_MC_IFETCH(srr1) == P8_SRR1_MC_IFETCH_ERAT_MULTIHIT) {
>  		flush_and_reload_slb();
>  		handled = 1;
> -- 
> 2.7.4



More information about the Linuxppc-dev mailing list