[PATCH 2/2] tty/hvc: Use opal irqchip interface if available

Benjamin Herrenschmidt benh at kernel.crashing.org
Tue Jun 28 13:34:29 AEST 2016


On Tue, 2016-06-28 at 13:11 +1000, Samuel Mendoza-Jonas wrote:
> Update the hvc driver to use the OPAL irqchip if made available by the
> running firmware. If it is not present, the driver falls back to the
> existing OPAL event number.

One thing that worries me a bit with the original transition to using
an interrupt from the old OPAL callback is that when passed an interrupt,
the HVC thread assumes interrupts work reliably and thus stops polling.

However, not all platforms have a functional serial interrupt. For
example rhesus doesn't. In fact we don't always know when we build
the device-tree whether the serial interrupt will work or not.

Now we might be saved by the OPAL heartbeat ... we do call
opal_poll_events regularily there. But I'd like you to verify it
by disabling the LPC interrupt for example on an openpower machine
and see how the console beahves.

Cheers,
Ben.
 

> Signed-off-by: Samuel Mendoza-Jonas <sam at mendozajonas.com>
> Cc: <stable at vger.kernel.org> # 4.1.x-
> ---
>  drivers/tty/hvc/hvc_opal.c | 12 +++++++++++-
>  1 file changed, 11 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/tty/hvc/hvc_opal.c b/drivers/tty/hvc/hvc_opal.c
> index b7cd0ae..8c53f5b 100644
> --- a/drivers/tty/hvc/hvc_opal.c
> +++ b/drivers/tty/hvc/hvc_opal.c
> @@ -170,6 +170,8 @@ static int hvc_opal_probe(struct platform_device *dev)
>  	hv_protocol_t proto;
>  	unsigned int termno, irq, boot = 0;
>  	const __be32 *reg;
> +	u32 prop;
> +	int rc;
>  
>  	if (of_device_is_compatible(dev->dev.of_node, "ibm,opal-console-raw")) {
>  		proto = HV_PROTOCOL_RAW;
> @@ -214,7 +216,15 @@ static int hvc_opal_probe(struct platform_device *dev)
>  		dev->dev.of_node->full_name,
>  		boot ? " (boot console)" : "");
>  
> -	irq = opal_event_request(ilog2(OPAL_EVENT_CONSOLE_INPUT));
> +	rc = of_property_read_u32(dev->dev.of_node, "interrupts", &prop);
> +	if (rc) {
> +		pr_info("hvc%d: No interrupts property, using OPAL event\n",
> +				termno);
> +		irq = opal_event_request(ilog2(OPAL_EVENT_CONSOLE_INPUT));
> +	} else {
> +		irq = irq_of_parse_and_map(dev->dev.of_node, 0);
> +	}
> +
>  	if (!irq) {
>  		pr_err("hvc_opal: Unable to map interrupt for device %s\n",
>  			dev->dev.of_node->full_name);


More information about the Linuxppc-dev mailing list