[PATCH 1/2] powerpc/pseries: Implemented indexed-count hotplug memory add

Nathan Fontenot nfont at linux.vnet.ibm.com
Tue Jul 12 00:31:43 AEST 2016


On 06/30/2016 02:22 PM, Sahil Mehta wrote:
> Indexed-count add for memory hotplug guarantees that a contiguous block
> of <count> lmbs beginning at a specified <index> will be assigned (NOT
> that <count> lmbs will be added). Because of Qemu's per-DIMM memory
> management, the addition of a contiguous block of memory currently
> requires a series of individual calls. Indexed-count add reduces
> this series into a single call.
> 
> Signed-off-by: Sahil Mehta <smehta at linux.vnet.ibm.com>
> ---
>  arch/powerpc/include/asm/rtas.h                 |    2
>  arch/powerpc/platforms/pseries/dlpar.c          |   32 ++++++-
>  arch/powerpc/platforms/pseries/hotplug-memory.c |  109 ++++++++++++++++++++---
>  3 files changed, 126 insertions(+), 17 deletions(-)
> 
> diff --git a/arch/powerpc/include/asm/rtas.h b/arch/powerpc/include/asm/rtas.h
> index 51400ba..f46b271 100644
> --- a/arch/powerpc/include/asm/rtas.h
> +++ b/arch/powerpc/include/asm/rtas.h
> @@ -307,6 +307,7 @@ struct pseries_hp_errorlog {
>  	union {
>  		__be32	drc_index;
>  		__be32	drc_count;
> +		__be32	indexed_count[2];
>  		char	drc_name[1];
>  	} _drc_u;
>  };
> @@ -322,6 +323,7 @@ struct pseries_hp_errorlog {
>  #define PSERIES_HP_ELOG_ID_DRC_NAME	1
>  #define PSERIES_HP_ELOG_ID_DRC_INDEX	2
>  #define PSERIES_HP_ELOG_ID_DRC_COUNT	3
> +#define PSERIES_HP_ELOG_ID_IC		4
> 
>  struct pseries_errorlog *get_pseries_errorlog(struct rtas_error_log *log,
>  					      uint16_t section_id);
> diff --git a/arch/powerpc/platforms/pseries/dlpar.c b/arch/powerpc/platforms/pseries/dlpar.c
> index 2b93ae8..a3d5f20 100644
> --- a/arch/powerpc/platforms/pseries/dlpar.c
> +++ b/arch/powerpc/platforms/pseries/dlpar.c
> @@ -345,11 +345,17 @@ static int handle_dlpar_errorlog(struct pseries_hp_errorlog *hp_elog)
>  	switch (hp_elog->id_type) {
>  	case PSERIES_HP_ELOG_ID_DRC_COUNT:
>  		hp_elog->_drc_u.drc_count =
> -					be32_to_cpu(hp_elog->_drc_u.drc_count);
> +				be32_to_cpu(hp_elog->_drc_u.drc_count);
>  		break;
>  	case PSERIES_HP_ELOG_ID_DRC_INDEX:
>  		hp_elog->_drc_u.drc_index =
> -					be32_to_cpu(hp_elog->_drc_u.drc_index);
> +				be32_to_cpu(hp_elog->_drc_u.drc_index);
> +		break;
> +	case PSERIES_HP_ELOG_ID_IC:
> +		hp_elog->_drc_u.indexed_count[0] =
> +				be32_to_cpu(hp_elog->_drc_u.indexed_count[0]);
> +		hp_elog->_drc_u.indexed_count[1] =
> +				be32_to_cpu(hp_elog->_drc_u.indexed_count[1]);
>  	}
> 
>  	switch (hp_elog->resource) {
> @@ -409,7 +415,27 @@ static ssize_t dlpar_store(struct class *class, struct class_attribute *attr,
>  		goto dlpar_store_out;
>  	}
> 
> -	if (!strncmp(arg, "index", 5)) {
> +	if (!strncmp(arg, "indexed-count", 13)) {
> +		u32 index, count;
> +		char *cstr, *istr;
> +
> +		hp_elog->id_type = PSERIES_HP_ELOG_ID_IC;
> +		arg += strlen("indexed-count ");
> +
> +		cstr = kstrdup(arg, GFP_KERNEL);
> +		istr = strchr(cstr, ' ');
> +		*istr++ = '\0';
> +
> +		if (kstrtou32(cstr, 0, &count) || kstrtou32(istr, 0, &index)) {
> +			rc = -EINVAL;
> +			pr_err("Invalid index or count : \"%s\"\n", buf);
> +			goto dlpar_store_out;

You need to free cstr before the goto dlpar_store_out to avoid
a memory leak.

> +		}
> +		kfree(cstr);
> +
> +		hp_elog->_drc_u.indexed_count[0] = cpu_to_be32(count);
> +		hp_elog->_drc_u.indexed_count[1] = cpu_to_be32(index);
> +	} else if (!strncmp(arg, "index", 5)) {
>  		u32 index;
> 
>  		hp_elog->id_type = PSERIES_HP_ELOG_ID_DRC_INDEX;
> diff --git a/arch/powerpc/platforms/pseries/hotplug-memory.c b/arch/powerpc/platforms/pseries/hotplug-memory.c
> index 2ce1385..cf359bf 100644
> --- a/arch/powerpc/platforms/pseries/hotplug-memory.c
> +++ b/arch/powerpc/platforms/pseries/hotplug-memory.c
> @@ -458,8 +458,8 @@ static int dlpar_memory_remove_by_count(u32 lmbs_to_remove,
>  			if (!lmbs[i].reserved)
>  				continue;
> 
> -			pr_info("Memory at %llx was hot-removed\n",
> -				lmbs[i].base_addr);
> +			pr_info("Memory at %llx (drc index %x) was hot-removed\n",
> +				lmbs[i].base_addr, lmbs[i].drc_index);
> 
>  			lmbs[i].reserved = 0;
>  		}
> @@ -618,7 +618,6 @@ static int dlpar_memory_add_by_count(u32 lmbs_to_add, struct property *prop)
>  	num_lmbs = *p++;
>  	lmbs = (struct of_drconf_cell *)p;
> 
> -	/* Validate that there are enough LMBs to satisfy the request */
>  	for (i = 0; i < num_lmbs; i++) {
>  		if (!(lmbs[i].flags & DRCONF_MEM_ASSIGNED))
>  			lmbs_available++;
> @@ -634,7 +633,7 @@ static int dlpar_memory_add_by_count(u32 lmbs_to_add, struct property *prop)
> 
>  		lmbs_added++;
> 
> -		/* Mark this lmb so we can remove it later if all of the
> +		/* Mark this LMB so we can remove it later if all of the
>  		 * requested LMBs cannot be added.
>  		 */
>  		lmbs[i].reserved = 1;
> @@ -701,16 +700,90 @@ static int dlpar_memory_add_by_index(u32 drc_index, struct property *prop)
>  	return rc;
>  }
> 
> +static int dlpar_memory_add_by_ic(u32 lmbs_to_add, u32 drc_index,
> +				  struct property *prop)
> +{
> +	struct of_drconf_cell *lmbs;
> +	u32 num_lmbs, *p;
> +	int i, rc;
> +	int lmbs_available = 0, start_index = 0, end_index;
> +
> +	pr_info("Attempting to hot-add %u LMB(s) at index %x\n",
> +		lmbs_to_add, drc_index);
> +
> +	if (lmbs_to_add == 0)
> +		return -EINVAL;
> +
> +	p = prop->value;
> +	num_lmbs = *p++;
> +	lmbs = (struct of_drconf_cell *)p;
> +
> +	/* Navigate to drc_index */
> +	while (start_index < num_lmbs) {
> +		if (lmbs[start_index].drc_index == drc_index)
> +			break;
> +
> +		start_index++;
> +	}
> +
> +	end_index = start_index + lmbs_to_add;
> +
> +	/* Validate that there are enough LMBs to satisfy the request */
> +	for (i = start_index; i < end_index; i++) {
> +		if (lmbs[i].flags & DRCONF_MEM_RESERVED)
> +			break;
> +
> +		lmbs_available++;
> +	}
> +
> +	if (lmbs_available < lmbs_to_add)
> +		return -EINVAL;
> +
> +	for (i = start_index; i < end_index; i++) {
> +		if (lmbs[i].flags & DRCONF_MEM_ASSIGNED)
> +			continue;
> +
> +		rc = dlpar_add_lmb(&lmbs[i]);
> +		if (rc)
> +			break;
> +
> +		lmbs[i].reserved = 1;
> +	}
> +
> +	if (rc) {
> +		pr_err("Memory indexed-count-add failed, removing any added LMBs\n");
> +
> +		for (i = start_index; i < end_index; i++) {
> +			if (!lmbs[i].reserved)
> +				continue;
> +
> +			rc = dlpar_remove_lmb(&lmbs[i]);
> +			if (rc)
> +				pr_err("Failed to remove LMB, drc index %x\n",
> +				       be32_to_cpu(lmbs[i].drc_index));
> +		}
> +		rc = -EINVAL;
> +	} else {
> +		for (i = start_index; i < end_index; i++) {
> +			if (!lmbs[i].reserved)
> +				continue;
> +
> +			pr_info("Memory at %llx (drc index %x) was hot-added\n",
> +				lmbs[i].base_addr, lmbs[i].drc_index);
> +			lmbs[i].reserved = 0;
> +		}
> +	}
> +
> +	return rc;
> +}
> +
>  int dlpar_memory(struct pseries_hp_errorlog *hp_elog)
>  {
>  	struct device_node *dn;
>  	struct property *prop;
> -	u32 count, drc_index;
> +	u32 count, drc_index, ic[2];
>  	int rc;
> 
> -	count = hp_elog->_drc_u.drc_count;
> -	drc_index = hp_elog->_drc_u.drc_index;
> -
>  	lock_device_hotplug();
> 
>  	dn = of_find_node_by_path("/ibm,dynamic-reconfiguration-memory");
> @@ -727,19 +800,27 @@ int dlpar_memory(struct pseries_hp_errorlog *hp_elog)
> 
>  	switch (hp_elog->action) {
>  	case PSERIES_HP_ELOG_ACTION_ADD:
> -		if (hp_elog->id_type == PSERIES_HP_ELOG_ID_DRC_COUNT)
> +		if (hp_elog->id_type == PSERIES_HP_ELOG_ID_DRC_COUNT) {
> +			count = hp_elog->_drc_u.drc_count;
>  			rc = dlpar_memory_add_by_count(count, prop);
> -		else if (hp_elog->id_type == PSERIES_HP_ELOG_ID_DRC_INDEX)
> +		} else if (hp_elog->id_type == PSERIES_HP_ELOG_ID_DRC_INDEX) {
> +			drc_index = hp_elog->_drc_u.drc_index;
>  			rc = dlpar_memory_add_by_index(drc_index, prop);
> -		else
> +		} else if (hp_elog->id_type == PSERIES_HP_ELOG_ID_IC) {
> +			ic[0] = hp_elog->_drc_u.indexed_count[0];
> +			ic[1] = hp_elog->_drc_u.indexed_count[1];
> +			rc = dlpar_memory_add_by_ic(ic[0], ic[1], prop);

Any reason you cannot use the drc_index and count variables here instead
of ic[]?

-Nathan

> +		} else
>  			rc = -EINVAL;
>  		break;
>  	case PSERIES_HP_ELOG_ACTION_REMOVE:
> -		if (hp_elog->id_type == PSERIES_HP_ELOG_ID_DRC_COUNT)
> +		if (hp_elog->id_type == PSERIES_HP_ELOG_ID_DRC_COUNT) {
> +			count = hp_elog->_drc_u.drc_count;
>  			rc = dlpar_memory_remove_by_count(count, prop);
> -		else if (hp_elog->id_type == PSERIES_HP_ELOG_ID_DRC_INDEX)
> +		} else if (hp_elog->id_type == PSERIES_HP_ELOG_ID_DRC_INDEX) {
> +			drc_index = hp_elog->_drc_u.drc_index;
>  			rc = dlpar_memory_remove_by_index(drc_index, prop);
> -		else
> +		} else
>  			rc = -EINVAL;
>  		break;
>  	default:
> 
> On 06/30/2016 02:21 PM, Sahil Mehta wrote:
>> Indexed-count memory management allows addition and removal of contiguous
>> lmb blocks to be added and removed with a single command. When compared
>> to the series of calls previously required to manage contiguous blocks,
>> indexed-count decreases command frequency and complexity, consequently
>> preventing buffer overflow.
>>
>> -Sahil Mehta
>> ---
>>  include/asm/rtas.h                 |    2
>>  platforms/pseries/dlpar.c          |   32 +++++-
>>  platforms/pseries/hotplug-memory.c |  194 ++++++++++++++++++++++++++++++++++---
>>  3 files changed, 210 insertions(+), 18 deletions(-)
>>
>> _______________________________________________
>> Linuxppc-dev mailing list
>> Linuxppc-dev at lists.ozlabs.org
>> https://lists.ozlabs.org/listinfo/linuxppc-dev
>>
> 
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev at lists.ozlabs.org
> https://lists.ozlabs.org/listinfo/linuxppc-dev
> 



More information about the Linuxppc-dev mailing list