[v3,11/41] mips: reuse asm-generic/barrier.h

[Leonid Yegoshin]

On 01/15/2016 01:57 AM, Will Deacon wrote:
> Paul,
>
>
> I think you figured this out while I was sleeping, but just to confirm:
>
>   1. The MIPS64 ISA doc [1] talks about SYNC in a way that applies only
>      to memory accesses appearing in *program-order* before the SYNC
>
>   2. We need WRC+sync+addr to work, which means that the SYNC in P1 must
>      also capture the store in P0 as being "before" the barrier. Leonid
>      reckons it works, but his explanation [2] focussed on the address
>      dependency in P2 as to why this works. If that is the case (i.e.
>      address dependency provides global transitivity), then WRC+addr+addr
>      should also work (even though its not required).

No, it is not correct. There is one old design which provides access to 
core (thread0 + thread1) write-buffers for threads load in advance of it 
is visible to other cores. It means, that WRC+sync+addr passes because 
of SYNC in write thread and register dependency inside other thread but 
WRC+addr+addr may fail because other core may get a stale data.

>
>   3. It seems that WRC+addr+addr doesn't work, so I'm still suspicious
>      about WRC+sync+addr, because neither the architecture document or
>      Leonid's explanation tell me that it should be forbidden.
>
> Will
>
> [1] https://imgtec.com/?do-download=4302
> [2] http://lkml.kernel.org/r/569565DA.2010903@imgtec.com (scroll to the end)