[V3] powerpc/powernv: Add a kmsg_dumper that flushes console output on panic

[Russell Currey]

On Tue, 2016-01-12 at 14:44 +1100, Stewart Smith wrote:
> Michael Ellerman <mpe at ellerman.id.au> writes:
> > On Fri, 2015-27-11 at 06:23:07 UTC, Russell Currey wrote:
> > > On BMC machines, console output is controlled by the OPAL firmware and is
> > > only flushed when its pollers are called.  When the kernel is in a panic
> > > state, it no longer calls these pollers and thus console output does not
> > > completely flush, causing some output from the panic to be lost.
> > > 
> > > Output is only actually lost when the kernel is configured to not power
> > > off
> > > or reboot after panic (i.e. CONFIG_PANIC_TIMEOUT is set to 0) since OPAL
> > > flushes the console buffer as part of its power down routines.  Before
> > > this
> > > patch, however, only partial output would be printed during the timeout
> > > wait.
> > > 
> > > This patch adds a new kmsg_dumper which gets called at panic time to
> > > ensure
> > > panic output is not lost.  It accomplishes this by calling
> > > OPAL_CONSOLE_FLUSH
> > > in the OPAL API, and if that is not available, the pollers are called
> > > enough
> > > times to (hopefully) completely flush the buffer.
> > > 
> > > The flushing mechanism will only affect output printed at and before the
> > > kmsg_dump call in kernel/panic.c:panic().  As such, the "end Kernel
> > > panic"
> > > message may still be truncated as follows:
> > > 
> > > > Call Trace:
> > > > [c000000f1f603b00] [c0000000008e9458] dump_stack+0x90/0xbc (unreliable)
> > > > [c000000f1f603b30] [c0000000008e7e78] panic+0xf8/0x2c4
> > > > [c000000f1f603bc0] [c000000000be4860] mount_block_root+0x288/0x33c
> > > > [c000000f1f603c80] [c000000000be4d14] prepare_namespace+0x1f4/0x254
> > > > [c000000f1f603d00] [c000000000be43e8] kernel_init_freeable+0x318/0x350
> > > > [c000000f1f603dc0] [c00000000000bd74] kernel_init+0x24/0x130
> > > > [c000000f1f603e30] [c0000000000095b0] ret_from_kernel_thread+0x5c/0xac
> > > > ---[ end Kernel panic - not
> > > 
> > > This functionality is implemented as a kmsg_dumper as it seems to be the
> > > most sensible way to introduce platform-specific functionality to the
> > > panic function.
> > > 
> > > Signed-off-by: Russell Currey <ruscur at russell.cc>
> > > Reviewed-by: Andrew Donnellan <andrew.donnellan at au1.ibm.com>
> > 
> > Applied to powerpc next, thanks.
> > 
> > https://git.kernel.org/powerpc/c/affddff69c55eb68969448f35f
> 
> The firmware interface changed slightly since this kernel patch[1], it
> added a parameter to OPAL_CONSOLE_FLUSH which accepted the terminal
> number to flush, theoretically allowing this to be plumbed into TTY
> layer or something too.
> 
> So, we'll either have to update this patch or replace it with an updated
> one.
> 
> [1] i'm pushing the accepted skiboot patch now.
> 
I'm working on an updated kernel patch to use the new parameter and additional
return values, so I suppose it's up to mpe whether or not this patch gets
merged now and another gets sent later to amend it, or if this patch gets
reverted in next and I can send a V4 adding the new stuff.