[PATCH 3/3] ASoC: fsl_ssi: remove register defaults

Fabio Estevam festevam at gmail.com
Mon Jan 11 23:10:56 AEDT 2016


On Mon, Jan 11, 2016 at 10:04 AM, Fabio Estevam <festevam at gmail.com> wrote:

> This patch causes the following issue in linux-next:
>
> [    2.526984] ------------[ cut here ]------------
> [    2.531632] WARNING: CPU: 1 PID: 1 at kernel/locking/lockdep.c:2755
> lockdep_trace_alloc+0xf4/0x124()
> [    2.540771] DEBUG_LOCKS_WARN_ON(irqs_disabled_flags(flags))
> [    2.546175] Modules linked in:
> [    2.549447] CPU: 1 PID: 1 Comm: swapper/0 Not tainted
> 4.4.0-rc8-next-20160111 #204
> [    2.557021] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
> [    2.563553] Backtrace:
> [    2.566040] [<c00136d8>] (dump_backtrace) from [<c0013874>]
> (show_stack+0x18/0x1c)
> [    2.573615]  r6:00000ac3 r5:00000000 r4:00000000 r3:00000000
> [    2.579362] [<c001385c>] (show_stack) from [<c02de89c>]
> (dump_stack+0x88/0xa4)
> [    2.586607] [<c02de814>] (dump_stack) from [<c002bcac>]
> (warn_slowpath_common+0x80/0xbc)
> [    2.594702]  r5:c0071ed0 r4:ef055b90
> [    2.598326] [<c002bc2c>] (warn_slowpath_common) from [<c002bd8c>]
> (warn_slowpath_fmt+0x38/0x40)
> [    2.607028]  r8:00000004 r7:00000004 r6:024080c0 r5:024080c0 r4:60000093
> [    2.613829] [<c002bd58>] (warn_slowpath_fmt) from [<c0071ed0>]
> (lockdep_trace_alloc+0xf4/0x124)
> [    2.622532]  r3:c09a1634 r2:c099dc0c
> [    2.626161] [<c0071ddc>] (lockdep_trace_alloc) from [<c010bc0c>]
> (kmem_cache_alloc+0x30/0x174)
> [    2.634778]  r4:ef001f00 r3:c0b02a88
> [    2.638407] [<c010bbdc>] (kmem_cache_alloc) from [<c03edac8>]
> (regcache_rbtree_write+0x150/0x724)
> [    2.647283]  r10:00000000 r9:00000010 r8:00000004 r7:00000004
> r6:0000002c r5:00000000
> [    2.655203]  r4:00000000
> [    2.657767] [<c03ed978>] (regcache_rbtree_write) from [<c03ec7d8>]
> (regcache_write+0x5c/0x64)

This fixes the warning:

--- a/sound/soc/fsl/fsl_ssi.c
+++ b/sound/soc/fsl/fsl_ssi.c
@@ -180,7 +180,6 @@ static const struct regmap_config fsl_ssi_regconfig = {
        .volatile_reg = fsl_ssi_volatile_reg,
        .precious_reg = fsl_ssi_precious_reg,
        .writeable_reg = fsl_ssi_writeable_reg,
-       .cache_type = REGCACHE_RBTREE,
 };

Is this the correct fix?


More information about the Linuxppc-dev mailing list