[PATCH 3/6] QE: Add uqe_serial document to bindings

[Qiang Zhao]

On Fri, Jan 09, 2016 at 04:12AM, Rob Herring <robh at kernel.org> wrote:
> -----Original Message-----
> From: Rob Herring [mailto:robh at kernel.org]
> Sent: Saturday, January 09, 2016 4:12 AM
> To: Qiang Zhao <qiang.zhao at nxp.com>
> Cc: devicetree at vger.kernel.org; linux-kernel at vger.kernel.org; linuxppc-
> dev at lists.ozlabs.org; Priyanka.Jain at freescale.com; oss at buserror.net
> Subject: Re: [PATCH 3/6] QE: Add uqe_serial document to bindings
> 
> On Fri, Jan 08, 2016 at 10:18:11AM +0800, Zhao Qiang wrote:
> > Add uqe_serial document to
> > Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/uqe_serial.txt
> >
> > Signed-off-by: Zhao Qiang <qiang.zhao at nxp.com>
> > ---
> >  .../bindings/powerpc/fsl/cpm_qe/uqe_serial.txt       | 20
> ++++++++++++++++++++
> >  1 file changed, 20 insertions(+)
> >  create mode 100644
> > Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/uqe_serial.txt
> >
> > diff --git
> > a/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/uqe_serial.txt
> > b/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/uqe_serial.txt
> > new file mode 100644
> > index 0000000..e677599
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/uqe_serial.
> > +++ txt
> > @@ -0,0 +1,20 @@
> > +* Serial
> > +
> > +Currently defined compatibles:
> > +- ucc_uart
> > +
> > +Properties for ucc_uart:
> > +device_type : which type the device is
> 
> Drop this please.

Yes, I will drop it in next version.

> 
> > +port-number : port number of UCC-UART
> 
> Use aliases instead.

I don't understand, can you explain more?

> 
> > +rx-clock-name : which clock QE use for RX tx-clock-name : which clock
> > +QE use for TX
> 
> These should use the clock binding.

This property means which clock source the UCC use, 
the QE just use this property to route UCC clock to clock source.
The clock source maybe either internal or outside(from clock input pin).
So clock binding is not apply in this case.

> 
> > +
> > +Example:
> > +
> > +	serial: ucc at 2200 {
> > +		device_type = "serial";
> > +		compatible = "ucc_uart";
> > +		port-number = <1>;
> > +		rx-clock-name = "brg2";
> > +		tx-clock-name = "brg2";
> > +	};
> > --
> > 2.1.0.27.g96db324
> >
> > --
> > To unsubscribe from this list: send the line "unsubscribe devicetree"
> > in the body of a message to majordomo at vger.kernel.org More majordomo
> > info at  http://vger.kernel.org/majordomo-info.html
Best Regards
Zhao Qiang