[PATCH 5/6] T104xRDB: Add qe node to t104xrdb

[Zhao Qiang]

add qe node to t104xrdb.dtsi

Signed-off-by: Zhao Qiang <qiang.zhao at nxp.com>
---
 arch/powerpc/boot/dts/fsl/t104xrdb.dtsi | 44 +++++++++++++++++++++++++++++++++
 1 file changed, 44 insertions(+)

diff --git a/arch/powerpc/boot/dts/fsl/t104xrdb.dtsi b/arch/powerpc/boot/dts/fsl/t104xrdb.dtsi
index 830ea48..63649fa 100644
--- a/arch/powerpc/boot/dts/fsl/t104xrdb.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t104xrdb.dtsi
@@ -186,4 +186,48 @@
 				  0 0x00010000>;
 		};
 	};
+
+	qe: qe at ffe140000 {
+		ranges = <0x0 0xf 0xfe140000 0x40000>;
+		reg = <0xf 0xfe140000 0 0x480>;
+		brg-frequency = <0>;
+		bus-frequency = <0>;
+
+		si1: si at 700 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,qe-si";
+			reg = <0x700 0x80>;
+		};
+
+		siram1: siram at 1000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,qe-siram";
+			reg = <0x1000 0x800>;
+		};
+
+		ucc_hdlc: ucc at 2000 {
+			compatible = "fsl,ucc_hdlc";
+			rx-clock-name = "clk8";
+			tx-clock-name = "clk9";
+			fsl,rx-sync-clock = "rsync_pin";
+			fsl,tx-sync-clock = "tsync_pin";
+			fsl,tx-timeslot = <0xfffffffe>;
+			fsl,rx-timeslot = <0xfffffffe>;
+			fsl,tdm-framer-type = "e1";
+			fsl,tdm-mode = "normal";
+			fsl,tdm-id = <0>;
+			fsl,siram-entry-id = <0>;
+			fsl,tdm-interface;
+		};
+
+		ucc_serial: ucc at 2200 {
+			device_type = "serial";
+			compatible = "ucc_uart";
+			port-number = <1>;
+			rx-clock-name = "brg2";
+			tx-clock-name = "brg2";
+		};
+	};
 };
-- 
2.1.0.27.g96db324