[PATCH 04/12] powerpc/ftrace: Prepare for -mprofile-kernel
Balbir Singh
bsingharora at gmail.com
Thu Feb 25 11:28:03 AEDT 2016
On 25/02/16 01:28, Michael Ellerman wrote:
> From: Torsten Duwe <duwe at lst.de>
>
> The gcc switch -mprofile-kernel, available for ppc64 on gcc > 4.8.5,
> allows to call _mcount very early in the function, which low-level
> ASM code and code patching functions need to consider.
> Especially the link register and the parameter registers are still
> alive and not yet saved into a new stack frame.
>
> * arch/powerpc/kernel/entry_64.S:
> - modify the default _mcount to be prepared for such call sites
> - have the ftrace_graph_caller save function arguments before
> calling its C helper prepare_ftrace_return
> * arch/powerpc/include/asm/code-patching.h:
> - define some common macros to make things readable.
> - pull the R2 stack location definition from
> arch/powerpc/kernel/module_64.c
> * arch/powerpc/kernel/module_64.c:
> - enhance binary code examination to handle the new patterns.
>
> Signed-off-by: Torsten Duwe <duwe at suse.de>
> Signed-off-by: Michael Ellerman <mpe at ellerman.id.au>
> ---
> arch/powerpc/include/asm/code-patching.h | 24 ++++++++++++++++
> arch/powerpc/kernel/entry_64.S | 48 +++++++++++++++++++++++++++++++-
> arch/powerpc/kernel/ftrace.c | 44 ++++++++++++++++++++++-------
> arch/powerpc/kernel/module_64.c | 31 +++++++++++++++++++--
> 4 files changed, 133 insertions(+), 14 deletions(-)
>
> diff --git a/arch/powerpc/include/asm/code-patching.h b/arch/powerpc/include/asm/code-patching.h
> index 840a5509b3f1..7820b32515de 100644
> --- a/arch/powerpc/include/asm/code-patching.h
> +++ b/arch/powerpc/include/asm/code-patching.h
> @@ -99,4 +99,28 @@ static inline unsigned long ppc_global_function_entry(void *func)
> #endif
> }
>
> +#ifdef CONFIG_PPC64
> +/* Some instruction encodings commonly used in dynamic ftracing
> + * and function live patching:
> + */
> +
> +/* This must match the definition of STK_GOT in <asm/ppc_asm.h> */
> +#if defined(_CALL_ELF) && _CALL_ELF == 2
> +#define R2_STACK_OFFSET 24
> +#else
> +#define R2_STACK_OFFSET 40
> +#endif
> +
> +/* load / store the TOC from / into the stack frame */
> +#define PPC_INST_LD_TOC (PPC_INST_LD | ___PPC_RT(__REG_R2) | \
> + ___PPC_RA(__REG_R1) | R2_STACK_OFFSET)
> +#define PPC_INST_STD_TOC (PPC_INST_STD | ___PPC_RS(__REG_R2) | \
> + ___PPC_RA(__REG_R1) | R2_STACK_OFFSET)
> +
> +/* usually preceded by a mflr r0 */
> +#define PPC_INST_STD_LR (PPC_INST_STD | ___PPC_RS(__REG_R0) | \
> + ___PPC_RA(__REG_R1) | PPC_LR_STKOFF)
> +
> +#endif /* CONFIG_PPC64 */
> +
> #endif /* _ASM_POWERPC_CODE_PATCHING_H */
> diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
> index 0d525ce3717f..2a7313cfbc7d 100644
> --- a/arch/powerpc/kernel/entry_64.S
> +++ b/arch/powerpc/kernel/entry_64.S
> @@ -1143,7 +1143,10 @@ _GLOBAL(enter_prom)
> #ifdef CONFIG_DYNAMIC_FTRACE
> _GLOBAL(mcount)
> _GLOBAL(_mcount)
> - blr
> + mflr r12
> + mtctr r12
> + mtlr r0
> + bctr
>
> _GLOBAL_TOC(ftrace_caller)
> /* Taken from output of objdump from lib64/glibc */
> @@ -1198,6 +1201,7 @@ _GLOBAL(ftrace_stub)
> #endif /* CONFIG_DYNAMIC_FTRACE */
>
> #ifdef CONFIG_FUNCTION_GRAPH_TRACER
> +#ifndef CC_USING_MPROFILE_KERNEL
> _GLOBAL(ftrace_graph_caller)
> /* load r4 with local address */
> ld r4, 128(r1)
> @@ -1222,6 +1226,48 @@ _GLOBAL(ftrace_graph_caller)
> addi r1, r1, 112
> blr
>
> +#else /* CC_USING_MPROFILE_KERNEL */
> +_GLOBAL(ftrace_graph_caller)
> + /* with -mprofile-kernel, parameter regs are still alive at _mcount */
> + std r10, 104(r1)
> + std r9, 96(r1)
> + std r8, 88(r1)
> + std r7, 80(r1)
> + std r6, 72(r1)
> + std r5, 64(r1)
> + std r4, 56(r1)
> + std r3, 48(r1)
> + mfctr r4 /* ftrace_caller has moved local addr here */
> + std r4, 40(r1)
> + mflr r3 /* ftrace_caller has restored LR from stack */
> + subi r4, r4, MCOUNT_INSN_SIZE
> +
> + bl prepare_ftrace_return
> + nop
> +
> + /*
> + * prepare_ftrace_return gives us the address we divert to.
> + * Change the LR to this.
> + */
> + mtlr r3
> +
> + ld r0, 40(r1)
> + mtctr r0
> + ld r10, 104(r1)
> + ld r9, 96(r1)
> + ld r8, 88(r1)
> + ld r7, 80(r1)
> + ld r6, 72(r1)
> + ld r5, 64(r1)
> + ld r4, 56(r1)
> + ld r3, 48(r1)
> +
> + addi r1, r1, 112
> + mflr r0
> + std r0, LRSAVE(r1)
> + bctr
> +#endif /* CC_USING_MPROFILE_KERNEL */
> +
> _GLOBAL(return_to_handler)
> /* need to save return values */
> std r4, -32(r1)
> diff --git a/arch/powerpc/kernel/ftrace.c b/arch/powerpc/kernel/ftrace.c
> index 4505cbfd0e13..a1d95f20b017 100644
> --- a/arch/powerpc/kernel/ftrace.c
> +++ b/arch/powerpc/kernel/ftrace.c
> @@ -281,16 +281,14 @@ int ftrace_make_nop(struct module *mod,
>
> #ifdef CONFIG_MODULES
> #ifdef CONFIG_PPC64
> +/* Examine the existing instructions for __ftrace_make_call.
> + * They should effectively be a NOP, and follow formal constraints,
> + * depending on the ABI. Return false if they don't.
> + */
> +#ifndef CC_USING_MPROFILE_KERNEL
> static int
> -__ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
> +expected_nop_sequence(void *ip, unsigned int op0, unsigned int op1)
> {
> - unsigned int op[2];
> - void *ip = (void *)rec->ip;
> -
> - /* read where this goes */
> - if (probe_kernel_read(op, ip, sizeof(op)))
> - return -EFAULT;
> -
> /*
> * We expect to see:
> *
> @@ -300,8 +298,34 @@ __ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
> * The load offset is different depending on the ABI. For simplicity
> * just mask it out when doing the compare.
> */
> - if ((op[0] != 0x48000008) || ((op[1] & 0xffff0000) != 0xe8410000)) {
> - pr_err("Unexpected call sequence: %x %x\n", op[0], op[1]);
> + if ((op0 != 0x48000008) || ((op1 & 0xffff0000) != 0xe8410000))
> + return 0;
> + return 1;
> +}
> +#else
> +static int
> +expected_nop_sequence(void *ip, unsigned int op0, unsigned int op1)
> +{
> + /* look for patched "NOP" on ppc64 with -mprofile-kernel */
> + if (op0 != PPC_INST_NOP)
> + return 0;
> + return 1;
With the magic changes, do we care for this? I think it's a bit of an overkill
> +}
> +#endif
> +
> +static int
> +__ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
> +{
> + unsigned int op[2];
> + void *ip = (void *)rec->ip;
> +
> + /* read where this goes */
> + if (probe_kernel_read(op, ip, sizeof(op)))
> + return -EFAULT;
> +
> + if (!expected_nop_sequence(ip, op[0], op[1])) {
> + pr_err("Unexpected call sequence at %p: %x %x\n",
> + ip, op[0], op[1]);
> return -EINVAL;
> }
>
> diff --git a/arch/powerpc/kernel/module_64.c b/arch/powerpc/kernel/module_64.c
> index e711d40a3b8f..32c10e0d2aa5 100644
> --- a/arch/powerpc/kernel/module_64.c
> +++ b/arch/powerpc/kernel/module_64.c
> @@ -41,7 +41,6 @@
> --RR. */
>
> #if defined(_CALL_ELF) && _CALL_ELF == 2
> -#define R2_STACK_OFFSET 24
>
> /* An address is simply the address of the function. */
> typedef unsigned long func_desc_t;
> @@ -73,7 +72,6 @@ static unsigned int local_entry_offset(const Elf64_Sym *sym)
> return PPC64_LOCAL_ENTRY_OFFSET(sym->st_other);
> }
> #else
> -#define R2_STACK_OFFSET 40
>
> /* An address is address of the OPD entry, which contains address of fn. */
> typedef struct ppc64_opd_entry func_desc_t;
> @@ -450,17 +448,44 @@ static unsigned long stub_for_addr(const Elf64_Shdr *sechdrs,
> return (unsigned long)&stubs[i];
> }
>
> +#ifdef CC_USING_MPROFILE_KERNEL
> +static int is_early_mcount_callsite(u32 *instruction)
> +{
> + /* -mprofile-kernel sequence starting with
> + * mflr r0 and maybe std r0, LRSAVE(r1).
> + */
> + if ((instruction[-3] == PPC_INST_MFLR &&
> + instruction[-2] == PPC_INST_STD_LR) ||
> + instruction[-2] == PPC_INST_MFLR) {
> + /* Nothing to be done here, it's an _mcount
> + * call location and r2 will have to be
> + * restored in the _mcount function.
> + */
> + return 1;
> + }
> + return 0;
> +}
> +#else
> +/* without -mprofile-kernel, mcount calls are never early */
> +static int is_early_mcount_callsite(u32 *instruction)
> +{
> + return 0;
> +}
> +#endif
> +
> /* We expect a noop next: if it is, replace it with instruction to
> restore r2. */
> static int restore_r2(u32 *instruction, struct module *me)
> {
> if (*instruction != PPC_INST_NOP) {
> + if (is_early_mcount_callsite(instruction))
> + return 1;
I don't think we need this either, since mcount callsites use a different stub now for ftrace
> pr_err("%s: Expect noop after relocate, got %08x\n",
> me->name, *instruction);
> return 0;
> }
> /* ld r2,R2_STACK_OFFSET(r1) */
> - *instruction = 0xe8410000 | R2_STACK_OFFSET;
> + *instruction = PPC_INST_LD_TOC;
> return 1;
> }
>
Warm Regards,
Balbir Singh.
More information about the Linuxppc-dev
mailing list