[PATCH V11_RESEND 09/10] powerpc/perf: Enable privilege mode SW branch filters

[Anshuman Khandual]

This patch enables privilege mode SW branch filters. Also modifies
POWER8 PMU branch filter configuration so that the privilege mode
branch filter implemented as part of base PMU event configuration
is reflected in bhrb filter mask. As a result, the SW will skip and
not try to process the privilege mode branch filters itself.

Signed-off-by: Anshuman Khandual <khandual at linux.vnet.ibm.com>
---
 arch/powerpc/include/asm/perf_event_server.h |  3 +++
 arch/powerpc/perf/core-book3s.c              | 37 ++++++++++++++++++++++++++--
 arch/powerpc/perf/power8-pmu.c               | 13 ++++++++--
 3 files changed, 49 insertions(+), 4 deletions(-)

diff --git a/arch/powerpc/include/asm/perf_event_server.h b/arch/powerpc/include/asm/perf_event_server.h
index cb7ca1a..23d68d3 100644
--- a/arch/powerpc/include/asm/perf_event_server.h
+++ b/arch/powerpc/include/asm/perf_event_server.h
@@ -85,6 +85,9 @@ extern unsigned long int read_bhrb(int n);
 		for ((x) = PERF_SAMPLE_BRANCH_USER; \
 			(x) < PERF_SAMPLE_BRANCH_MAX; (x) <<= 1)
 
+#define POWER_ADDR_USER		0
+#define POWER_ADDR_KERNEL	1
+
 /*
  * Only override the default definitions in include/linux/perf_event.h
  * if we have hardware PMU support.
diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c
index fc60191..a44e975 100644
--- a/arch/powerpc/perf/core-book3s.c
+++ b/arch/powerpc/perf/core-book3s.c
@@ -20,6 +20,7 @@
 #include <asm/firmware.h>
 #include <asm/ptrace.h>
 #include <asm/code-patching.h>
+#include <asm/cputable.h>
 
 #define BHRB_MAX_ENTRIES	32
 #define BHRB_TARGET		0x0000000000000002
@@ -474,10 +475,10 @@ static bool check_instruction(unsigned int *addr, u64 sw_filter)
  * Access the instruction contained in the address and then check
  * whether it complies with the applicable SW branch filters.
  */
-static bool keep_branch(u64 from, u64 sw_filter)
+static bool keep_branch(u64 from, u64 to, u64 sw_filter)
 {
 	unsigned int instr;
-	bool ret;
+	bool to_plm, ret, select_branch;
 
 	/*
 	 * The "from" branch for every branch record has to go
@@ -487,6 +488,37 @@ static bool keep_branch(u64 from, u64 sw_filter)
 	if (sw_filter == 0)
 		return true;
 
+	to_plm = is_kernel_addr(to) ? POWER_ADDR_KERNEL : POWER_ADDR_USER;
+
+	/*
+	 * XXX: Applying the privilege mode SW branch filters first on
+	 * the 'TO' address creates an AND semantic with other SW branch
+	 * filters which are ORed with each other being applied on the
+	 * 'FROM' address there after.
+	 */
+	if (sw_filter & PERF_SAMPLE_BRANCH_PLM_ALL) {
+		select_branch = false;
+
+		if (sw_filter & PERF_SAMPLE_BRANCH_USER) {
+			if (to_plm == POWER_ADDR_USER)
+				select_branch = true;
+		}
+
+		if (sw_filter & PERF_SAMPLE_BRANCH_KERNEL) {
+			if (to_plm == POWER_ADDR_KERNEL)
+				select_branch = true;
+		}
+
+		if (sw_filter & PERF_SAMPLE_BRANCH_HV) {
+			if (cpu_has_feature(CPU_FTR_HVMODE)
+				&& (to_plm == POWER_ADDR_KERNEL))
+				select_branch = true;
+		}
+
+		if (!select_branch)
+			return false;
+	}
+
 	if (is_kernel_addr(from)) {
 		return check_instruction((unsigned int *) from, sw_filter);
 	} else {
@@ -576,6 +608,7 @@ static void power_pmu_bhrb_read(struct cpu_hw_events *cpuhw)
 
 		/* Apply SW branch filters and drop the entry if required */
 		if (!keep_branch(cpuhw->bhrb_entries[u_index].from,
+					cpuhw->bhrb_entries[u_index].to,
 						cpuhw->bhrb_sw_filter))
 			u_index--;
 		u_index++;
diff --git a/arch/powerpc/perf/power8-pmu.c b/arch/powerpc/perf/power8-pmu.c
index ee8a68a..375477a 100644
--- a/arch/powerpc/perf/power8-pmu.c
+++ b/arch/powerpc/perf/power8-pmu.c
@@ -670,9 +670,19 @@ static u64 power8_bhrb_filter_map(u64 branch_sample_type, u64 *bhrb_filter)
 	 * filter configuration. BHRB is always recorded along with a
 	 * regular PMU event. As the privilege state filter is handled
 	 * in the basic PMC configuration of the accompanying regular
-	 * PMU event, we ignore any separate BHRB specific request.
+	 * PMU event, we ignore any separate BHRB specific request. But
+	 * this needs to be communicated with the branch filter mask.
 	 */
 
+	if (branch_sample_type & PERF_SAMPLE_BRANCH_USER)
+		*bhrb_filter |= PERF_SAMPLE_BRANCH_USER;
+
+	if (branch_sample_type & PERF_SAMPLE_BRANCH_KERNEL)
+		*bhrb_filter |= PERF_SAMPLE_BRANCH_KERNEL;
+
+	if (branch_sample_type & PERF_SAMPLE_BRANCH_HV)
+		*bhrb_filter |= PERF_SAMPLE_BRANCH_HV;
+
 	/* Ignore user, kernel, hv bits */
 	branch_sample_type &= ~PERF_SAMPLE_BRANCH_PLM_ALL;
 
@@ -703,7 +713,6 @@ static u64 power8_bhrb_filter_map(u64 branch_sample_type, u64 *bhrb_filter)
 			if (branch_sample_type) {
 				/* Multiple filters will be processed in SW */
 				pmu_bhrb_filter = 0;
-				*bhrb_filter = 0;
 				return pmu_bhrb_filter;
 			} else {
 				/* Individual filter will be processed in HW */
-- 
2.1.0