[PATCH v8 12/23] powerpc32: remove ioremap_base

[Christophe Leroy]

ioremap_base is not initialised and is nowhere used so remove it

Signed-off-by: Christophe Leroy <christophe.leroy at c-s.fr>
---
v2: no change
v3: fix comment as well
v4: no change
v5: no change
v6: no change
v8: no change

 arch/powerpc/include/asm/nohash/32/pgtable.h |  2 +-
 arch/powerpc/mm/mmu_decl.h                   |  1 -
 arch/powerpc/mm/pgtable_32.c                 |  3 +--
 arch/powerpc/platforms/embedded6xx/mpc10x.h  | 10 ----------
 4 files changed, 2 insertions(+), 14 deletions(-)

diff --git a/arch/powerpc/include/asm/nohash/32/pgtable.h b/arch/powerpc/include/asm/nohash/32/pgtable.h
index e201600..7808475 100644
--- a/arch/powerpc/include/asm/nohash/32/pgtable.h
+++ b/arch/powerpc/include/asm/nohash/32/pgtable.h
@@ -86,7 +86,7 @@ extern int icache_44x_need_flush;
  * We no longer map larger than phys RAM with the BATs so we don't have
  * to worry about the VMALLOC_OFFSET causing problems.  We do have to worry
  * about clashes between our early calls to ioremap() that start growing down
- * from ioremap_base being run into the VM area allocations (growing upwards
+ * from IOREMAP_TOP being run into the VM area allocations (growing upwards
  * from VMALLOC_START).  For this reason we have ioremap_bot to check when
  * we actually run into our mappings setup in the early boot with the VM
  * system.  This really does become a problem for machines with good amounts
diff --git a/arch/powerpc/mm/mmu_decl.h b/arch/powerpc/mm/mmu_decl.h
index 3872332..53564a3 100644
--- a/arch/powerpc/mm/mmu_decl.h
+++ b/arch/powerpc/mm/mmu_decl.h
@@ -100,7 +100,6 @@ extern void setbat(int index, unsigned long virt, phys_addr_t phys,
 
 extern int __map_without_bats;
 extern int __allow_ioremap_reserved;
-extern unsigned long ioremap_base;
 extern unsigned int rtas_data, rtas_size;
 
 struct hash_pte;
diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c
index db0d35e..815ccd7 100644
--- a/arch/powerpc/mm/pgtable_32.c
+++ b/arch/powerpc/mm/pgtable_32.c
@@ -37,7 +37,6 @@
 
 #include "mmu_decl.h"
 
-unsigned long ioremap_base;
 unsigned long ioremap_bot;
 EXPORT_SYMBOL(ioremap_bot);	/* aka VMALLOC_END */
 
@@ -173,7 +172,7 @@ __ioremap_caller(phys_addr_t addr, unsigned long size, unsigned long flags,
 	/*
 	 * Choose an address to map it to.
 	 * Once the vmalloc system is running, we use it.
-	 * Before then, we use space going down from ioremap_base
+	 * Before then, we use space going down from IOREMAP_TOP
 	 * (ioremap_bot records where we're up to).
 	 */
 	p = addr & PAGE_MASK;
diff --git a/arch/powerpc/platforms/embedded6xx/mpc10x.h b/arch/powerpc/platforms/embedded6xx/mpc10x.h
index b290b63..5ad1202 100644
--- a/arch/powerpc/platforms/embedded6xx/mpc10x.h
+++ b/arch/powerpc/platforms/embedded6xx/mpc10x.h
@@ -24,13 +24,11 @@
  *   Processor: 0x80000000 - 0x807fffff -> PCI I/O: 0x00000000 - 0x007fffff
  *   Processor: 0xc0000000 - 0xdfffffff -> PCI MEM: 0x00000000 - 0x1fffffff
  *   PCI MEM:   0x80000000 -> Processor System Memory: 0x00000000
- *   EUMB mapped to: ioremap_base - 0x00100000 (ioremap_base - 1 MB)
  *
  * MAP B (CHRP Map)
  *   Processor: 0xfe000000 - 0xfebfffff -> PCI I/O: 0x00000000 - 0x00bfffff
  *   Processor: 0x80000000 - 0xbfffffff -> PCI MEM: 0x80000000 - 0xbfffffff
  *   PCI MEM:   0x00000000 -> Processor System Memory: 0x00000000
- *   EUMB mapped to: ioremap_base - 0x00100000 (ioremap_base - 1 MB)
  */
 
 /*
@@ -138,14 +136,6 @@
 #define MPC10X_EUMB_WP_OFFSET		0x000ff000 /* Data path diagnostic, watchpoint reg offset */
 #define MPC10X_EUMB_WP_SIZE		0x00001000 /* Data path diagnostic, watchpoint reg size */
 
-/*
- * Define some recommended places to put the EUMB regs.
- * For both maps, recommend putting the EUMB from 0xeff00000 to 0xefffffff.
- */
-extern unsigned long			ioremap_base;
-#define	MPC10X_MAPA_EUMB_BASE		(ioremap_base - MPC10X_EUMB_SIZE)
-#define	MPC10X_MAPB_EUMB_BASE		MPC10X_MAPA_EUMB_BASE
-
 enum ppc_sys_devices {
 	MPC10X_IIC1,
 	MPC10X_DMA0,
-- 
2.1.0