[PATCH 05/11] powerpc/kvm: Split HPT allocation from activation
Thomas Huth
thuth at redhat.com
Fri Dec 16 22:57:26 AEDT 2016
On 15.12.2016 06:53, David Gibson wrote:
> Currently, kvmppc_alloc_hpt() both allocates a new hashed page table (HPT)
> and sets it up as the active page table for a VM. For the upcoming HPT
> resize implementation we're going to want to allocate HPTs separately from
> activating them.
>
> So, split the allocation itself out into kvmppc_allocate_hpt() and perform
> the activation with a new kvmppc_set_hpt() function. Likewise we split
> kvmppc_free_hpt(), which just frees the HPT, from kvmppc_release_hpt()
> which unsets it as an active HPT, then frees it.
>
> We also move the logic to fall back to smaller HPT sizes if the first try
> fails into the single caller which used that behaviour,
> kvmppc_hv_setup_htab_rma(). This introduces a slight semantic change, in
> that previously if the initial attempt at CMA allocation failed, we would
> fall back to attempting smaller sizes with the page allocator. Now, we
> try first CMA, then the page allocator at each size. As far as I can tell
> this change should be harmless.
>
> To match, we make kvmppc_free_hpt() just free the actual HPT itself. The
> call to kvmppc_free_lpid() that was there, we move to the single caller.
>
> Signed-off-by: David Gibson <david at gibson.dropbear.id.au>
> ---
> arch/powerpc/include/asm/kvm_book3s_64.h | 3 ++
> arch/powerpc/include/asm/kvm_ppc.h | 5 +-
> arch/powerpc/kvm/book3s_64_mmu_hv.c | 90 ++++++++++++++++----------------
> arch/powerpc/kvm/book3s_hv.c | 18 +++++--
> 4 files changed, 65 insertions(+), 51 deletions(-)
>
> diff --git a/arch/powerpc/include/asm/kvm_book3s_64.h b/arch/powerpc/include/asm/kvm_book3s_64.h
> index 8810327..6dc4004 100644
> --- a/arch/powerpc/include/asm/kvm_book3s_64.h
> +++ b/arch/powerpc/include/asm/kvm_book3s_64.h
> @@ -22,6 +22,9 @@
>
> #include <asm/book3s/64/mmu-hash.h>
>
> +/* Power architecture requires HPT is at least 256kB */
> +#define PPC_MIN_HPT_ORDER 18
> +
> #ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE
> static inline struct kvmppc_book3s_shadow_vcpu *svcpu_get(struct kvm_vcpu *vcpu)
> {
> diff --git a/arch/powerpc/include/asm/kvm_ppc.h b/arch/powerpc/include/asm/kvm_ppc.h
> index 3db6be9..41575b8 100644
> --- a/arch/powerpc/include/asm/kvm_ppc.h
> +++ b/arch/powerpc/include/asm/kvm_ppc.h
> @@ -155,9 +155,10 @@ extern void kvmppc_core_destroy_mmu(struct kvm_vcpu *vcpu);
> extern int kvmppc_kvm_pv(struct kvm_vcpu *vcpu);
> extern void kvmppc_map_magic(struct kvm_vcpu *vcpu);
>
> -extern long kvmppc_alloc_hpt(struct kvm *kvm, u32 *htab_orderp);
> +extern int kvmppc_allocate_hpt(struct kvm_hpt_info *info, u32 order);
> +extern void kvmppc_set_hpt(struct kvm *kvm, struct kvm_hpt_info *info);
> extern long kvmppc_alloc_reset_hpt(struct kvm *kvm, u32 *htab_orderp);
> -extern void kvmppc_free_hpt(struct kvm *kvm);
> +extern void kvmppc_free_hpt(struct kvm_hpt_info *info);
> extern long kvmppc_prepare_vrma(struct kvm *kvm,
> struct kvm_userspace_memory_region *mem);
> extern void kvmppc_map_vrma(struct kvm_vcpu *vcpu,
> diff --git a/arch/powerpc/kvm/book3s_64_mmu_hv.c b/arch/powerpc/kvm/book3s_64_mmu_hv.c
> index fe88132..68bb228 100644
> --- a/arch/powerpc/kvm/book3s_64_mmu_hv.c
> +++ b/arch/powerpc/kvm/book3s_64_mmu_hv.c
> @@ -40,76 +40,70 @@
>
> #include "trace_hv.h"
>
> -/* Power architecture requires HPT is at least 256kB */
> -#define PPC_MIN_HPT_ORDER 18
> -
> static long kvmppc_virtmode_do_h_enter(struct kvm *kvm, unsigned long flags,
> long pte_index, unsigned long pteh,
> unsigned long ptel, unsigned long *pte_idx_ret);
> static void kvmppc_rmap_reset(struct kvm *kvm);
>
> -long kvmppc_alloc_hpt(struct kvm *kvm, u32 *htab_orderp)
> +int kvmppc_allocate_hpt(struct kvm_hpt_info *info, u32 order)
> {
> unsigned long hpt = 0;
> - struct revmap_entry *rev;
> + int cma = 0;
> struct page *page = NULL;
> - long order = KVM_DEFAULT_HPT_ORDER;
> -
> - if (htab_orderp) {
> - order = *htab_orderp;
> - if (order < PPC_MIN_HPT_ORDER)
> - order = PPC_MIN_HPT_ORDER;
> - }
Not sure, but as far as I can see, *htab_orderp could still be provided
from userspace via kvm_arch_vm_ioctl_hv() -> kvmppc_alloc_reset_hpt() ?
In that case, I think you should still check that the order is bigger
than PPC_MIN_HPT_ORDER, and return an error code otherwise?
Or if you feel confident that this value can never be supplied by
userspace anymore, add at least a BUG_ON(order < PPC_MIN_HPT_ORDER) here?
> + struct revmap_entry *rev;
> + unsigned long npte;
>
> - kvm->arch.hpt.cma = 0;
> + hpt = 0;
> + cma = 0;
Both hpt and cma are initialized to zero in the variable declarations
already, so the above two lines are redundant.
> page = kvm_alloc_hpt_cma(1ul << (order - PAGE_SHIFT));
> if (page) {
> hpt = (unsigned long)pfn_to_kaddr(page_to_pfn(page));
> memset((void *)hpt, 0, (1ul << order));
> - kvm->arch.hpt.cma = 1;
> + cma = 1;
> }
>
> - /* Lastly try successively smaller sizes from the page allocator */
> - /* Only do this if userspace didn't specify a size via ioctl */
> - while (!hpt && order > PPC_MIN_HPT_ORDER && !htab_orderp) {
> - hpt = __get_free_pages(GFP_KERNEL|__GFP_ZERO|__GFP_REPEAT|
> - __GFP_NOWARN, order - PAGE_SHIFT);
> - if (!hpt)
> - --order;
> - }
> + if (!hpt)
> + hpt = __get_free_pages(GFP_KERNEL|__GFP_ZERO|__GFP_REPEAT
> + |__GFP_NOWARN, order - PAGE_SHIFT);
>
> if (!hpt)
> return -ENOMEM;
>
> - kvm->arch.hpt.virt = hpt;
> - kvm->arch.hpt.order = order;
> -
> - atomic64_set(&kvm->arch.mmio_update, 0);
> + /* HPTEs are 2**4 bytes long */
> + npte = 1ul << (order - 4);
>
> /* Allocate reverse map array */
> - rev = vmalloc(sizeof(struct revmap_entry) * kvmppc_hpt_npte(&kvm->arch.hpt));
> + rev = vmalloc(sizeof(struct revmap_entry) * npte);
> if (!rev) {
> - pr_err("kvmppc_alloc_hpt: Couldn't alloc reverse map array\n");
> + pr_err("kvmppc_allocate_hpt: Couldn't alloc reverse map array\n");
> goto out_freehpt;
So here you jump to out_freehpt before setting info->virt ...
> }
> - kvm->arch.hpt.rev = rev;
> - kvm->arch.sdr1 = __pa(hpt) | (order - 18);
>
> - pr_info("KVM guest htab at %lx (order %ld), LPID %x\n",
> - hpt, order, kvm->arch.lpid);
> + info->order = order;
> + info->virt = hpt;
> + info->cma = cma;
> + info->rev = rev;
>
> - if (htab_orderp)
> - *htab_orderp = order;
> return 0;
>
> out_freehpt:
> - if (kvm->arch.hpt.cma)
> + if (cma)
> kvm_free_hpt_cma(page, 1 << (order - PAGE_SHIFT));
> else
> - free_pages(hpt, order - PAGE_SHIFT);
> + free_pages(info->virt, order - PAGE_SHIFT);
... but here you free info->virt which has not been set in case of the
"goto" above. That's clearly wrong.
> return -ENOMEM;
> }
>
> +void kvmppc_set_hpt(struct kvm *kvm, struct kvm_hpt_info *info)
> +{
> + atomic64_set(&kvm->arch.mmio_update, 0);
> + kvm->arch.hpt = *info;
> + kvm->arch.sdr1 = __pa(info->virt) | (info->order - 18);
> +
> + pr_info("KVM guest htab at %lx (order %ld), LPID %x\n",
> + info->virt, (long)info->order, kvm->arch.lpid);
Not directly related to your patch, but these messages pop up in the
dmesg each time I start a guest ... for the normal user who does not
have a clue what "htab" means, this can be pretty much annoying. Could
you maybe turn this into a pr_debug() instead?
> +}
> +
> long kvmppc_alloc_reset_hpt(struct kvm *kvm, u32 *htab_orderp)
> {
> long err = -EBUSY;
> @@ -138,24 +132,28 @@ long kvmppc_alloc_reset_hpt(struct kvm *kvm, u32 *htab_orderp)
> *htab_orderp = order;
> err = 0;
> } else {
> - err = kvmppc_alloc_hpt(kvm, htab_orderp);
> - order = *htab_orderp;
> + struct kvm_hpt_info info;
> +
> + err = kvmppc_allocate_hpt(&info, *htab_orderp);
> + if (err < 0)
> + goto out;
> + kvmppc_set_hpt(kvm, &info);
Just a matter of taste (I dislike gotos if avoidable), but you could
also do:
err = kvmppc_allocate_hpt(&info, *htab_orderp);
if (!err)
kvmppc_set_hpt(kvm, &info);
... and that's even one line shorter ;-)
> }
> out:
> mutex_unlock(&kvm->lock);
> return err;
> }
>
> -void kvmppc_free_hpt(struct kvm *kvm)
> +void kvmppc_free_hpt(struct kvm_hpt_info *info)
> {
> - kvmppc_free_lpid(kvm->arch.lpid);
> - vfree(kvm->arch.hpt.rev);
> - if (kvm->arch.hpt.cma)
> - kvm_free_hpt_cma(virt_to_page(kvm->arch.hpt.virt),
> - 1 << (kvm->arch.hpt.order - PAGE_SHIFT));
> + vfree(info->rev);
> + if (info->cma)
> + kvm_free_hpt_cma(virt_to_page(info->virt),
> + 1 << (info->order - PAGE_SHIFT));
> else
> - free_pages(kvm->arch.hpt.virt,
> - kvm->arch.hpt.order - PAGE_SHIFT);
> + free_pages(info->virt, info->order - PAGE_SHIFT);
> + info->virt = 0;
> + info->order = 0;
> }
>
> /* Bits in first HPTE dword for pagesize 4k, 64k or 16M */
> diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c
> index 78baa2b..71c5adb 100644
> --- a/arch/powerpc/kvm/book3s_hv.c
> +++ b/arch/powerpc/kvm/book3s_hv.c
> @@ -3115,11 +3115,22 @@ static int kvmppc_hv_setup_htab_rma(struct kvm_vcpu *vcpu)
>
> /* Allocate hashed page table (if not done already) and reset it */
> if (!kvm->arch.hpt.virt) {
> - err = kvmppc_alloc_hpt(kvm, NULL);
> - if (err) {
> + int order = KVM_DEFAULT_HPT_ORDER;
> + struct kvm_hpt_info info;
> +
> + err = kvmppc_allocate_hpt(&info, order);
> + /* If we get here, it means userspace didn't specify a
> + * size explicitly. So, try successively smaller
> + * sizes if the default failed. */
> + while (err < 0 && --order >= PPC_MIN_HPT_ORDER)
> + err = kvmppc_allocate_hpt(&info, order);
Not sure, but maybe replace "err < 0" with "err == -ENOMEM" in the while
condition? Or should it also loop on other future possible errors types?
> + if (err < 0) {
> pr_err("KVM: Couldn't alloc HPT\n");
> goto out;
> }
> +
> + kvmppc_set_hpt(kvm, &info);
> }
>
> /* Look up the memslot for guest physical address 0 */
> @@ -3357,7 +3368,8 @@ static void kvmppc_core_destroy_vm_hv(struct kvm *kvm)
>
> kvmppc_free_vcores(kvm);
>
> - kvmppc_free_hpt(kvm);
> + kvmppc_free_lpid(kvm->arch.lpid);
> + kvmppc_free_hpt(&kvm->arch.hpt);
>
> kvmppc_free_pimap(kvm);
> }
>
Thomas
More information about the Linuxppc-dev
mailing list