[RFC 1/2] powerpc/32: Unset MSR RI in exception epilogs

[Segher Boessenkool]

On Tue, Dec 13, 2016 at 09:39:55PM +0100, christophe leroy wrote:
> Le 13/12/2016 à 20:15, Segher Boessenkool a écrit :
> >On Tue, Dec 13, 2016 at 07:19:41PM +0100, Christophe Leroy wrote:
> >>At exception prologs, once SRR0 and SRR1 have been saved, MSR RI is
> >>set to mark the interrupt as recoverable.
> >>
> >>MSR RI has to be unset before writing into SRR0 and SRR1 at exception
> >>epilogs.
> >
> >Why?  What goes wrong without this?  Etc.
> 
> The following patch implements perf instruction counting using the 8xx 
> debug counters. When the counter reaches 0, it fires a debug exception.
> If that exception happens between the setting of srr0/srr1 and the rfi, 
> values set to srr0/srr1 are lost and we end up with an Oops.
> 
> To avoid that, MSR RI has to be unset. That way, because the debug 
> counters mode is set to masked mode in register LCTRL2, no debug 
> interrupt will happen during that critical phase.

Okay, so why then do you do an expensive sequence on all other processors?


Segher