[v2, 2/3] powerpc/fsl/dts: add QMan and BMan portal nodes on t1024

[Madalin-Cristian Bucur]

> From: Scott Wood [mailto:oss at buserror.net]
> Sent: Wednesday, December 07, 2016 2:59 AM
> 
> On Tue, Dec 06, 2016 at 03:13:38PM +0200, Madalin Bucur wrote:
> > Signed-off-by: Madalin Bucur <madalin.bucur at nxp.com>
> > ---
> >  arch/powerpc/boot/dts/fsl/t1024qds.dts | 29
> +++++++++++++++++++++++++++++
> >  arch/powerpc/boot/dts/fsl/t1024rdb.dts | 33
> +++++++++++++++++++++++++++++++++
> >  2 files changed, 62 insertions(+)
> 
> So, in patch 1/3 you add qman and bman nodes to t1023si-post.dtsi and
> call it "add QMan and BMan portal nodes on t1023rdb" as if it were
> board-specific (the only board-specific part is the reserved-memory
> nodes, not the portals).
> 
> Then, in this patch you only touch board-specific files, and label it
> "add QMan and BMan portal nodes on t1024"...

That needs fixing...

> > diff --git a/arch/powerpc/boot/dts/fsl/t1024rdb.dts
> b/arch/powerpc/boot/dts/fsl/t1024rdb.dts
> > index 302cdd2..73a6453 100644
> > --- a/arch/powerpc/boot/dts/fsl/t1024rdb.dts
> > +++ b/arch/powerpc/boot/dts/fsl/t1024rdb.dts
> > @@ -41,6 +41,31 @@
> >  	#size-cells = <2>;
> >  	interrupt-parent = <&mpic>;
> >
> > +	aliases {
> > +		sg_2500_aqr105_phy4 = &sg_2500_aqr105_phy4;
> > +	};
> 
> What does this have to do with the qman and bman portal nodes?  Why is
> this alias needed?
> 
> -Scott

It's needed by u-boot, should be a separate patch.
I'll resend.

Madalin