[PATCH 01/10] via-cuda: Cleanup printk calls
Finn Thain
fthain at telegraphics.com.au
Thu Dec 1 17:09:33 AEDT 2016
Add missing log message severity, remove old debug messages and
replace printk() loop with print_hex_dump() call.
Tested-by: Stan Johnson <userm57 at yahoo.com>
Signed-off-by: Finn Thain <fthain at telegraphics.com.au>
---
drivers/macintosh/via-cuda.c | 26 ++++++--------------------
1 file changed, 6 insertions(+), 20 deletions(-)
diff --git a/drivers/macintosh/via-cuda.c b/drivers/macintosh/via-cuda.c
index bad1813..98ced65 100644
--- a/drivers/macintosh/via-cuda.c
+++ b/drivers/macintosh/via-cuda.c
@@ -221,7 +221,7 @@ static int __init via_cuda_start(void)
return -EAGAIN;
}
- printk("Macintosh CUDA driver v0.5 for Unified ADB.\n");
+ pr_info("Macintosh CUDA driver v0.5 for Unified ADB.\n");
cuda_fully_inited = 1;
return 0;
@@ -251,7 +251,7 @@ cuda_probe(void)
int x; \
for (x = 1000; !(cond); --x) { \
if (x == 0) { \
- printk("Timeout waiting for " what "\n"); \
+ pr_err("Timeout waiting for " what "\n"); \
return -ENXIO; \
} \
udelay(100); \
@@ -357,6 +357,7 @@ cuda_reset_adb_bus(void)
return 0;
}
#endif /* CONFIG_ADB */
+
/* Construct and send a cuda request */
int
cuda_request(struct adb_request *req, void (*done)(struct adb_request *),
@@ -474,12 +475,9 @@ cuda_interrupt(int irq, void *arg)
}
status = (~in_8(&via[B]) & (TIP|TREQ)) | (in_8(&via[ACR]) & SR_OUT);
- /* printk("cuda_interrupt: state=%d status=%x\n", cuda_state, status); */
switch (cuda_state) {
case idle:
/* CUDA has sent us the first byte of data - unsolicited */
- if (status != TREQ)
- printk("cuda: state=idle, status=%x\n", status);
(void)in_8(&via[SR]);
out_8(&via[B], in_8(&via[B]) & ~TIP);
cuda_state = reading;
@@ -489,8 +487,6 @@ cuda_interrupt(int irq, void *arg)
case awaiting_reply:
/* CUDA has sent us the first byte of data of a reply */
- if (status != TREQ)
- printk("cuda: state=awaiting_reply, status=%x\n", status);
(void)in_8(&via[SR]);
out_8(&via[B], in_8(&via[B]) & ~TIP);
cuda_state = reading;
@@ -506,9 +502,6 @@ cuda_interrupt(int irq, void *arg)
out_8(&via[B], in_8(&via[B]) | TIP | TACK);
cuda_state = idle;
} else {
- /* assert status == TIP + SR_OUT */
- if (status != TIP + SR_OUT)
- printk("cuda: state=sent_first_byte status=%x\n", status);
out_8(&via[SR], current_req->data[1]);
out_8(&via[B], in_8(&via[B]) ^ TACK);
data_index = 2;
@@ -545,9 +538,6 @@ cuda_interrupt(int irq, void *arg)
out_8(&via[B], in_8(&via[B]) | TACK | TIP);
cuda_state = read_done;
} else {
- /* assert status == TIP | TREQ */
- if (status != TIP + TREQ)
- printk("cuda: state=reading status=%x\n", status);
out_8(&via[B], in_8(&via[B]) ^ TACK);
}
break;
@@ -593,7 +583,7 @@ cuda_interrupt(int irq, void *arg)
break;
default:
- printk("cuda_interrupt: unknown cuda_state %d?\n", cuda_state);
+ pr_err("cuda_interrupt: unknown cuda_state %d?\n", cuda_state);
}
spin_unlock(&cuda_lock);
if (complete && req) {
@@ -614,8 +604,6 @@ cuda_interrupt(int irq, void *arg)
static void
cuda_input(unsigned char *buf, int nb)
{
- int i;
-
switch (buf[0]) {
case ADB_PACKET:
#ifdef CONFIG_XMON
@@ -633,9 +621,7 @@ cuda_input(unsigned char *buf, int nb)
break;
default:
- printk("data from cuda (%d bytes):", nb);
- for (i = 0; i < nb; ++i)
- printk(" %.2x", buf[i]);
- printk("\n");
+ print_hex_dump(KERN_INFO, "cuda_input: ", DUMP_PREFIX_NONE, 32, 1,
+ buf, nb, false);
}
}
--
2.7.3
More information about the Linuxppc-dev
mailing list