[PATCH V3 1/8] powerpc/firmware: Add definitions for new firmware features.

[Bharata B Rao]

On Tue, Aug 2, 2016 at 6:12 AM, Michael Bringmann
<mwb at linux.vnet.ibm.com> wrote:
> Firmware Features: Define new bit flags representing the presence of
> new device tree properties "ibm,drc-info", and "ibm,dynamic-memory-v2".
> These flags are used to tell the front end processor when the Linux
> kernel supports the new properties, and by the front end processor to
> tell the Linux kernel that the new properties are present in the devie
> tree.
>
> Signed-off-by: Michael Bringmann <mwb at linux.vnet.ibm.com>
> ---
> diff --git a/arch/powerpc/include/asm/firmware.h b/arch/powerpc/include/asm/firmware.h
> index b062924..a9d66d5 100644
> --- a/arch/powerpc/include/asm/firmware.h
> +++ b/arch/powerpc/include/asm/firmware.h
> @@ -51,6 +51,8 @@
>  #define FW_FEATURE_BEST_ENERGY ASM_CONST(0x0000000080000000)
>  #define FW_FEATURE_TYPE1_AFFINITY ASM_CONST(0x0000000100000000)
>  #define FW_FEATURE_PRRN                ASM_CONST(0x0000000200000000)
> +#define FW_FEATURE_DYN_MEM_V2  ASM_CONST(0x0000000400000000)
> +#define FW_FEATURE_DRC_INFO    ASM_CONST(0x0000000800000000)
>
>  #ifndef __ASSEMBLY__
>
> @@ -66,7 +68,8 @@ enum {
>                 FW_FEATURE_MULTITCE | FW_FEATURE_SPLPAR | FW_FEATURE_LPAR |
>                 FW_FEATURE_CMO | FW_FEATURE_VPHN | FW_FEATURE_XCMO |
>                 FW_FEATURE_SET_MODE | FW_FEATURE_BEST_ENERGY |
> -               FW_FEATURE_TYPE1_AFFINITY | FW_FEATURE_PRRN,
> +               FW_FEATURE_TYPE1_AFFINITY | FW_FEATURE_PRRN |
> +               FW_FEATURE_DYN_MEM_V2 | FW_FEATURE_DRC_INFO,
>         FW_FEATURE_PSERIES_ALWAYS = 0,
>         FW_FEATURE_POWERNV_POSSIBLE = FW_FEATURE_OPAL,
>         FW_FEATURE_POWERNV_ALWAYS = 0,
> diff --git a/arch/powerpc/include/asm/prom.h b/arch/powerpc/include/asm/prom.h
> index 7f436ba..b9a1534 100644
> --- a/arch/powerpc/include/asm/prom.h
> +++ b/arch/powerpc/include/asm/prom.h
> @@ -155,6 +203,8 @@ struct of_drconf_cell {
>  #define OV5_PFO_HW_842         0x0E40  /* PFO Compression Accelerator */
>  #define OV5_PFO_HW_ENCR                0x0E20  /* PFO Encryption Accelerator */
>  #define OV5_SUB_PROCESSORS     0x0F01  /* 1,2,or 4 Sub-Processors supported */
> +#define OV5_DYN_MEM_V2         0x1680  /* Redef Prop Structures: dyn-mem-v2 */
> +#define OV5_DRC_INFO           0x1640  /* Redef Prop Structures: drc-info   */

Shouldn't these two features be set in ibm_architecture_vec[] so that
guest firmware knows when to generate these two new device tree
properties ?

Regards,
Bharata.