[PATCH v3 19/21] powerpc: tm: Always use fp_state and vr_state to store live registers
Cyril Bur
cyrilbur at gmail.com
Wed Aug 17 13:43:21 AEST 2016
There is currently an inconsistency as to how the entire CPU register
state is saved and restored when a thread uses transactional memory
(TM).
Using transactional memory results in the CPU having duplicated
(almost all) of its register state. This duplication results in a set
of registers which can be considered 'live', those being currently
modified by the instructions being executed and another set that is
frozen at a point in time.
On context switch, both sets of state have to be saved and (later)
restored. These two states are often called a variety of different
things. Common terms for the state which only exists after has entered
a transaction (performed a TBEGIN instruction) in hardware is the
'transactional' or 'speculative'.
Between a TBEGIN and a TEND or TABORT (or an event that causes the
hardware to abort), regardless of the use of TSUSPEND the
transactional state can be referred to as the live state.
The second state is often to referred to as the 'checkpointed' state
and is a duplication of the live state when the TBEGIN instruction is
executed. This state is kept in the hardware and will be rolled back
to on transaction failure.
Currently all the registers stored in pt_regs are ALWAYS the live
registers, that is, when a thread has transactional registers their
values are stored in pt_regs and the checkpointed state is in
ckpt_regs. A strange opposite is true for fp_state. When a thread is
non transactional fp_state holds the live registers. When a thread
has initiated a transaction fp_state holds the checkpointed state and
transact_fp becomes the structure which holds the live state (at this
point it is a transactional state). The same is true for vr_state
This method creates confusion as to where the live state is, in some
circumstances it requires extra work to determine where to put the
live state and prevents the use of common functions designed (probably
before TM) to save the live state.
With this patch pt_regs, fp_state and vr_state all represent the
same thing and the other structures [pending rename] are for
checkpointed state.
Signed-off-by: Cyril Bur <cyrilbur at gmail.com>
---
arch/powerpc/include/asm/processor.h | 7 +-
arch/powerpc/kernel/process.c | 83 +++--------
arch/powerpc/kernel/ptrace.c | 278 +++++++++--------------------------
arch/powerpc/kernel/signal_32.c | 50 +++----
arch/powerpc/kernel/signal_64.c | 54 +++----
arch/powerpc/kernel/tm.S | 94 ++++++------
arch/powerpc/kernel/traps.c | 12 +-
7 files changed, 197 insertions(+), 381 deletions(-)
diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index 68e3bf5..feab2ce 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -267,16 +267,13 @@ struct thread_struct {
unsigned long tm_dscr;
/*
- * Transactional FP and VSX 0-31 register set.
- * NOTE: the sense of these is the opposite of the integer ckpt_regs!
+ * Checkpointed FP and VSX 0-31 register set.
*
* When a transaction is active/signalled/scheduled etc., *regs is the
* most recent set of/speculated GPRs with ckpt_regs being the older
* checkpointed regs to which we roll back if transaction aborts.
*
- * However, fpr[] is the checkpointed 'base state' of FP regs, and
- * transact_fpr[] is the new set of transactional values.
- * VRs work the same way.
+ * These are analogous to how ckpt_regs and pt_regs work
*/
struct thread_fp_state transact_fp;
struct thread_vr_state transact_vr;
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 432884c..2d0fb4f 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -814,26 +814,6 @@ static inline bool hw_brk_match(struct arch_hw_breakpoint *a,
static void tm_reclaim_thread(struct thread_struct *thr,
struct thread_info *ti, uint8_t cause)
{
- unsigned long msr_diff = 0;
-
- /*
- * If FP/VSX registers have been already saved to the
- * thread_struct, move them to the transact_fp array.
- * We clear the TIF_RESTORE_TM bit since after the reclaim
- * the thread will no longer be transactional.
- */
- if (test_ti_thread_flag(ti, TIF_RESTORE_TM)) {
- msr_diff = thr->ckpt_regs.msr & ~thr->regs->msr;
- if (msr_diff & MSR_FP)
- memcpy(&thr->transact_fp, &thr->fp_state,
- sizeof(struct thread_fp_state));
- if (msr_diff & MSR_VEC)
- memcpy(&thr->transact_vr, &thr->vr_state,
- sizeof(struct thread_vr_state));
- clear_ti_thread_flag(ti, TIF_RESTORE_TM);
- msr_diff &= MSR_FP | MSR_VEC | MSR_VSX | MSR_FE0 | MSR_FE1;
- }
-
/*
* Use the current MSR TM suspended bit to track if we have
* checkpointed state outstanding.
@@ -852,15 +832,9 @@ static void tm_reclaim_thread(struct thread_struct *thr,
if (!MSR_TM_SUSPENDED(mfmsr()))
return;
- tm_reclaim(thr, thr->regs->msr, cause);
+ giveup_all(container_of(thr, struct task_struct, thread));
- /* Having done the reclaim, we now have the checkpointed
- * FP/VSX values in the registers. These might be valid
- * even if we have previously called enable_kernel_fp() or
- * flush_fp_to_thread(), so update thr->regs->msr to
- * indicate their current validity.
- */
- thr->regs->msr |= msr_diff;
+ tm_reclaim(thr, thr->ckpt_regs.msr, cause);
}
void tm_reclaim_current(uint8_t cause)
@@ -889,14 +863,6 @@ static inline void tm_reclaim_task(struct task_struct *tsk)
if (!MSR_TM_ACTIVE(thr->regs->msr))
goto out_and_saveregs;
- /* Stash the original thread MSR, as giveup_fpu et al will
- * modify it. We hold onto it to see whether the task used
- * FP & vector regs. If the TIF_RESTORE_TM flag is set,
- * ckpt_regs.msr is already set.
- */
- if (!test_ti_thread_flag(task_thread_info(tsk), TIF_RESTORE_TM))
- thr->ckpt_regs.msr = thr->regs->msr;
-
TM_DEBUG("--- tm_reclaim on pid %d (NIP=%lx, "
"ccr=%lx, msr=%lx, trap=%lx)\n",
tsk->pid, thr->regs->nip,
@@ -954,7 +920,7 @@ static inline void tm_recheckpoint_new_task(struct task_struct *new)
* If the task was using FP, we non-lazily reload both the original and
* the speculative FP register states. This is because the kernel
* doesn't see if/when a TM rollback occurs, so if we take an FP
- * unavoidable later, we are unable to determine which set of FP regs
+ * unavailable later, we are unable to determine which set of FP regs
* need to be restored.
*/
if (!new->thread.regs)
@@ -970,35 +936,27 @@ static inline void tm_recheckpoint_new_task(struct task_struct *new)
"(new->msr 0x%lx, new->origmsr 0x%lx)\n",
new->pid, new->thread.regs->msr, msr);
- /* This loads the checkpointed FP/VEC state, if used */
tm_recheckpoint(&new->thread, msr);
- /* This loads the speculative FP/VEC state, if used */
- if (msr & MSR_FP) {
- do_load_up_transact_fpu(&new->thread);
- new->thread.regs->msr |=
- (MSR_FP | new->thread.fpexc_mode);
- }
-#ifdef CONFIG_ALTIVEC
- if (msr & MSR_VEC) {
- do_load_up_transact_altivec(&new->thread);
- new->thread.regs->msr |= MSR_VEC;
- }
-#endif
- /* We may as well turn on VSX too since all the state is restored now */
- if (msr & MSR_VSX)
- new->thread.regs->msr |= MSR_VSX;
+ /*
+ * The checkpointed state has been restored but the live state has
+ * not, ensure all the math functionality is turned off to trigger
+ * restore_math() to reload.
+ */
+ new->thread.regs->msr &= ~(MSR_FP | MSR_VEC | MSR_VSX);
TM_DEBUG("*** tm_recheckpoint of pid %d complete "
"(kernel msr 0x%lx)\n",
new->pid, mfmsr());
}
-static inline void __switch_to_tm(struct task_struct *prev)
+static inline void __switch_to_tm(struct task_struct *prev,
+ struct task_struct *new)
{
if (cpu_has_feature(CPU_FTR_TM)) {
tm_enable();
tm_reclaim_task(prev);
+ tm_recheckpoint_new_task(new);
}
}
@@ -1020,6 +978,12 @@ void restore_tm_state(struct pt_regs *regs)
{
unsigned long msr_diff;
+ /*
+ * This is the only moment we should clear TIF_RESTORE_TM as
+ * it is here that ckpt_regs.msr and pt_regs.msr become the same
+ * again, anything else could lead to an incorrect ckpt_msr being
+ * saved and therefore incorrect signal contexts.
+ */
clear_thread_flag(TIF_RESTORE_TM);
if (!MSR_TM_ACTIVE(regs->msr))
return;
@@ -1041,7 +1005,7 @@ void restore_tm_state(struct pt_regs *regs)
#else
#define tm_recheckpoint_new_task(new)
-#define __switch_to_tm(prev)
+#define __switch_to_tm(prev, new)
#endif /* CONFIG_PPC_TRANSACTIONAL_MEM */
static inline void save_sprs(struct thread_struct *t)
@@ -1202,11 +1166,11 @@ struct task_struct *__switch_to(struct task_struct *prev,
*/
save_sprs(&prev->thread);
- __switch_to_tm(prev);
-
/* Save FPU, Altivec, VSX and SPE state */
giveup_all(prev);
+ __switch_to_tm(prev, new);
+
/*
* We can't take a PMU exception inside _switch() since there is a
* window where the kernel stack SLB and the kernel stack are out
@@ -1214,8 +1178,6 @@ struct task_struct *__switch_to(struct task_struct *prev,
*/
hard_irq_disable();
- tm_recheckpoint_new_task(new);
-
/*
* Call restore_sprs() before calling _switch(). If we move it after
* _switch() then we miss out on calling it for new tasks. The reason
@@ -1451,8 +1413,7 @@ int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
* tm_recheckpoint_new_task() (on the same task) to restore the
* checkpointed state back and the TM mode.
*/
- __switch_to_tm(src);
- tm_recheckpoint_new_task(src);
+ __switch_to_tm(src, src);
*dst = *src;
diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c
index 4f3c575..ed53712 100644
--- a/arch/powerpc/kernel/ptrace.c
+++ b/arch/powerpc/kernel/ptrace.c
@@ -383,13 +383,9 @@ static int gpr_set(struct task_struct *target, const struct user_regset *regset,
}
/*
- * When the transaction is active, 'transact_fp' holds the current running
- * value of all FPR registers and 'fp_state' holds the last checkpointed
- * value of all FPR registers for the current transaction. When transaction
- * is not active 'fp_state' holds the current running state of all the FPR
- * registers. So this function which returns the current running values of
- * all the FPR registers, needs to know whether any transaction is active
- * or not.
+ * Regardless of transactions, 'fp_state' holds the current running
+ * value of all FPR registers and 'transact_fp' holds the last checkpointed
+ * value of all FPR registers for the current transaction.
*
* Userspace interface buffer layout:
*
@@ -397,13 +393,6 @@ static int gpr_set(struct task_struct *target, const struct user_regset *regset,
* u64 fpr[32];
* u64 fpscr;
* };
- *
- * There are two config options CONFIG_VSX and CONFIG_PPC_TRANSACTIONAL_MEM
- * which determines the final code in this function. All the combinations of
- * these two config options are possible except the one below as transactional
- * memory config pulls in CONFIG_VSX automatically.
- *
- * !defined(CONFIG_VSX) && defined(CONFIG_PPC_TRANSACTIONAL_MEM)
*/
static int fpr_get(struct task_struct *target, const struct user_regset *regset,
unsigned int pos, unsigned int count,
@@ -412,50 +401,29 @@ static int fpr_get(struct task_struct *target, const struct user_regset *regset,
#ifdef CONFIG_VSX
u64 buf[33];
int i;
-#endif
- flush_fp_to_thread(target);
-#if defined(CONFIG_VSX) && defined(CONFIG_PPC_TRANSACTIONAL_MEM)
- /* copy to local buffer then write that out */
- if (MSR_TM_ACTIVE(target->thread.regs->msr)) {
- flush_altivec_to_thread(target);
- flush_tmregs_to_thread(target);
- for (i = 0; i < 32 ; i++)
- buf[i] = target->thread.TS_TRANS_FPR(i);
- buf[32] = target->thread.transact_fp.fpscr;
- } else {
- for (i = 0; i < 32 ; i++)
- buf[i] = target->thread.TS_FPR(i);
- buf[32] = target->thread.fp_state.fpscr;
- }
- return user_regset_copyout(&pos, &count, &kbuf, &ubuf, buf, 0, -1);
-#endif
+ flush_fp_to_thread(target);
-#if defined(CONFIG_VSX) && !defined(CONFIG_PPC_TRANSACTIONAL_MEM)
/* copy to local buffer then write that out */
for (i = 0; i < 32 ; i++)
buf[i] = target->thread.TS_FPR(i);
buf[32] = target->thread.fp_state.fpscr;
return user_regset_copyout(&pos, &count, &kbuf, &ubuf, buf, 0, -1);
-#endif
-
-#if !defined(CONFIG_VSX) && !defined(CONFIG_PPC_TRANSACTIONAL_MEM)
+#else
BUILD_BUG_ON(offsetof(struct thread_fp_state, fpscr) !=
offsetof(struct thread_fp_state, fpr[32]));
+ flush_fp_to_thread(target);
+
return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
&target->thread.fp_state, 0, -1);
#endif
}
/*
- * When the transaction is active, 'transact_fp' holds the current running
- * value of all FPR registers and 'fp_state' holds the last checkpointed
- * value of all FPR registers for the current transaction. When transaction
- * is not active 'fp_state' holds the current running state of all the FPR
- * registers. So this function which setss the current running values of
- * all the FPR registers, needs to know whether any transaction is active
- * or not.
+ * Regardless of transactions, 'fp_state' holds the current running
+ * value of all FPR registers and 'transact_fp' holds the last checkpointed
+ * value of all FPR registers for the current transaction.
*
* Userspace interface buffer layout:
*
@@ -464,12 +432,6 @@ static int fpr_get(struct task_struct *target, const struct user_regset *regset,
* u64 fpscr;
* };
*
- * There are two config options CONFIG_VSX and CONFIG_PPC_TRANSACTIONAL_MEM
- * which determines the final code in this function. All the combinations of
- * these two config options are possible except the one below as transactional
- * memory config pulls in CONFIG_VSX automatically.
- *
- * !defined(CONFIG_VSX) && defined(CONFIG_PPC_TRANSACTIONAL_MEM)
*/
static int fpr_set(struct task_struct *target, const struct user_regset *regset,
unsigned int pos, unsigned int count,
@@ -478,44 +440,24 @@ static int fpr_set(struct task_struct *target, const struct user_regset *regset,
#ifdef CONFIG_VSX
u64 buf[33];
int i;
-#endif
+
flush_fp_to_thread(target);
-#if defined(CONFIG_VSX) && defined(CONFIG_PPC_TRANSACTIONAL_MEM)
/* copy to local buffer then write that out */
i = user_regset_copyin(&pos, &count, &kbuf, &ubuf, buf, 0, -1);
if (i)
return i;
- if (MSR_TM_ACTIVE(target->thread.regs->msr)) {
- flush_altivec_to_thread(target);
- flush_tmregs_to_thread(target);
- for (i = 0; i < 32 ; i++)
- target->thread.TS_TRANS_FPR(i) = buf[i];
- target->thread.transact_fp.fpscr = buf[32];
- } else {
- for (i = 0; i < 32 ; i++)
- target->thread.TS_FPR(i) = buf[i];
- target->thread.fp_state.fpscr = buf[32];
- }
- return 0;
-#endif
-
-#if defined(CONFIG_VSX) && !defined(CONFIG_PPC_TRANSACTIONAL_MEM)
- /* copy to local buffer then write that out */
- i = user_regset_copyin(&pos, &count, &kbuf, &ubuf, buf, 0, -1);
- if (i)
- return i;
for (i = 0; i < 32 ; i++)
target->thread.TS_FPR(i) = buf[i];
target->thread.fp_state.fpscr = buf[32];
return 0;
-#endif
-
-#if !defined(CONFIG_VSX) && !defined(CONFIG_PPC_TRANSACTIONAL_MEM)
+#else
BUILD_BUG_ON(offsetof(struct thread_fp_state, fpscr) !=
offsetof(struct thread_fp_state, fpr[32]));
+ flush_fp_to_thread(target);
+
return user_regset_copyin(&pos, &count, &kbuf, &ubuf,
&target->thread.fp_state, 0, -1);
#endif
@@ -543,13 +485,10 @@ static int vr_active(struct task_struct *target,
}
/*
- * When the transaction is active, 'transact_vr' holds the current running
- * value of all the VMX registers and 'vr_state' holds the last checkpointed
- * value of all the VMX registers for the current transaction to fall back
- * on in case it aborts. When transaction is not active 'vr_state' holds
- * the current running state of all the VMX registers. So this function which
- * gets the current running values of all the VMX registers, needs to know
- * whether any transaction is active or not.
+ * Regardless of transactions, 'vr_state' holds the current running
+ * value of all the VMX registers and 'transact_vr' holds the last
+ * checkpointed value of all the VMX registers for the current
+ * transaction to fall back on in case it aborts.
*
* Userspace interface buffer layout:
*
@@ -563,7 +502,6 @@ static int vr_get(struct task_struct *target, const struct user_regset *regset,
unsigned int pos, unsigned int count,
void *kbuf, void __user *ubuf)
{
- struct thread_vr_state *addr;
int ret;
flush_altivec_to_thread(target);
@@ -571,19 +509,8 @@ static int vr_get(struct task_struct *target, const struct user_regset *regset,
BUILD_BUG_ON(offsetof(struct thread_vr_state, vscr) !=
offsetof(struct thread_vr_state, vr[32]));
-#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
- if (MSR_TM_ACTIVE(target->thread.regs->msr)) {
- flush_fp_to_thread(target);
- flush_tmregs_to_thread(target);
- addr = &target->thread.transact_vr;
- } else {
- addr = &target->thread.vr_state;
- }
-#else
- addr = &target->thread.vr_state;
-#endif
ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
- addr, 0,
+ &target->thread.vr_state, 0,
33 * sizeof(vector128));
if (!ret) {
/*
@@ -595,14 +522,7 @@ static int vr_get(struct task_struct *target, const struct user_regset *regset,
} vrsave;
memset(&vrsave, 0, sizeof(vrsave));
-#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
- if (MSR_TM_ACTIVE(target->thread.regs->msr))
- vrsave.word = target->thread.transact_vrsave;
- else
- vrsave.word = target->thread.vrsave;
-#else
vrsave.word = target->thread.vrsave;
-#endif
ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, &vrsave,
33 * sizeof(vector128), -1);
@@ -612,13 +532,10 @@ static int vr_get(struct task_struct *target, const struct user_regset *regset,
}
/*
- * When the transaction is active, 'transact_vr' holds the current running
- * value of all the VMX registers and 'vr_state' holds the last checkpointed
- * value of all the VMX registers for the current transaction to fall back
- * on in case it aborts. When transaction is not active 'vr_state' holds
- * the current running state of all the VMX registers. So this function which
- * sets the current running values of all the VMX registers, needs to know
- * whether any transaction is active or not.
+ * Regardless of transactions, 'vr_state' holds the current running
+ * value of all the VMX registers and 'transact_vr' holds the last
+ * checkpointed value of all the VMX registers for the current
+ * transaction to fall back on in case it aborts.
*
* Userspace interface buffer layout:
*
@@ -632,7 +549,6 @@ static int vr_set(struct task_struct *target, const struct user_regset *regset,
unsigned int pos, unsigned int count,
const void *kbuf, const void __user *ubuf)
{
- struct thread_vr_state *addr;
int ret;
flush_altivec_to_thread(target);
@@ -640,19 +556,8 @@ static int vr_set(struct task_struct *target, const struct user_regset *regset,
BUILD_BUG_ON(offsetof(struct thread_vr_state, vscr) !=
offsetof(struct thread_vr_state, vr[32]));
-#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
- if (MSR_TM_ACTIVE(target->thread.regs->msr)) {
- flush_fp_to_thread(target);
- flush_tmregs_to_thread(target);
- addr = &target->thread.transact_vr;
- } else {
- addr = &target->thread.vr_state;
- }
-#else
- addr = &target->thread.vr_state;
-#endif
ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
- addr, 0,
+ &target->thread.vr_state, 0,
33 * sizeof(vector128));
if (!ret && count > 0) {
/*
@@ -664,27 +569,12 @@ static int vr_set(struct task_struct *target, const struct user_regset *regset,
} vrsave;
memset(&vrsave, 0, sizeof(vrsave));
-#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
- if (MSR_TM_ACTIVE(target->thread.regs->msr))
- vrsave.word = target->thread.transact_vrsave;
- else
- vrsave.word = target->thread.vrsave;
-#else
vrsave.word = target->thread.vrsave;
-#endif
+
ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &vrsave,
33 * sizeof(vector128), -1);
- if (!ret) {
-
-#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
- if (MSR_TM_ACTIVE(target->thread.regs->msr))
- target->thread.transact_vrsave = vrsave.word;
- else
- target->thread.vrsave = vrsave.word;
-#else
+ if (!ret)
target->thread.vrsave = vrsave.word;
-#endif
- }
}
return ret;
@@ -706,13 +596,10 @@ static int vsr_active(struct task_struct *target,
}
/*
- * When the transaction is active, 'transact_fp' holds the current running
- * value of all FPR registers and 'fp_state' holds the last checkpointed
- * value of all FPR registers for the current transaction. When transaction
- * is not active 'fp_state' holds the current running state of all the FPR
- * registers. So this function which returns the current running values of
- * all the FPR registers, needs to know whether any transaction is active
- * or not.
+ * Regardless of transactions, 'fp_state' holds the current running
+ * value of all FPR registers and 'transact_fp' holds the last
+ * checkpointed value of all FPR registers for the current
+ * transaction.
*
* Userspace interface buffer layout:
*
@@ -727,27 +614,14 @@ static int vsr_get(struct task_struct *target, const struct user_regset *regset,
u64 buf[32];
int ret, i;
-#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
+ flush_tmregs_to_thread(target);
flush_fp_to_thread(target);
flush_altivec_to_thread(target);
- flush_tmregs_to_thread(target);
-#endif
flush_vsx_to_thread(target);
-#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
- if (MSR_TM_ACTIVE(target->thread.regs->msr)) {
- for (i = 0; i < 32 ; i++)
- buf[i] = target->thread.
- transact_fp.fpr[i][TS_VSRLOWOFFSET];
- } else {
- for (i = 0; i < 32 ; i++)
- buf[i] = target->thread.
- fp_state.fpr[i][TS_VSRLOWOFFSET];
- }
-#else
for (i = 0; i < 32 ; i++)
buf[i] = target->thread.fp_state.fpr[i][TS_VSRLOWOFFSET];
-#endif
+
ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
buf, 0, 32 * sizeof(double));
@@ -755,12 +629,10 @@ static int vsr_get(struct task_struct *target, const struct user_regset *regset,
}
/*
- * When the transaction is active, 'transact_fp' holds the current running
- * value of all FPR registers and 'fp_state' holds the last checkpointed
- * value of all FPR registers for the current transaction. When transaction
- * is not active 'fp_state' holds the current running state of all the FPR
- * registers. So this function which sets the current running values of all
- * the FPR registers, needs to know whether any transaction is active or not.
+ * Regardless of transactions, 'fp_state' holds the current running
+ * value of all FPR registers and 'transact_fp' holds the last
+ * checkpointed value of all FPR registers for the current
+ * transaction.
*
* Userspace interface buffer layout:
*
@@ -775,31 +647,16 @@ static int vsr_set(struct task_struct *target, const struct user_regset *regset,
u64 buf[32];
int ret,i;
-#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
+ flush_tmregs_to_thread(target);
flush_fp_to_thread(target);
flush_altivec_to_thread(target);
- flush_tmregs_to_thread(target);
-#endif
flush_vsx_to_thread(target);
ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
buf, 0, 32 * sizeof(double));
-
-#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
- if (MSR_TM_ACTIVE(target->thread.regs->msr)) {
- for (i = 0; i < 32 ; i++)
- target->thread.transact_fp.
- fpr[i][TS_VSRLOWOFFSET] = buf[i];
- } else {
+ if (!ret)
for (i = 0; i < 32 ; i++)
- target->thread.fp_state.
- fpr[i][TS_VSRLOWOFFSET] = buf[i];
- }
-#else
- for (i = 0; i < 32 ; i++)
- target->thread.fp_state.fpr[i][TS_VSRLOWOFFSET] = buf[i];
-#endif
-
+ target->thread.fp_state.fpr[i][TS_VSRLOWOFFSET] = buf[i];
return ret;
}
@@ -925,9 +782,9 @@ static int tm_cgpr_get(struct task_struct *target,
if (!MSR_TM_ACTIVE(target->thread.regs->msr))
return -ENODATA;
+ flush_tmregs_to_thread(target);
flush_fp_to_thread(target);
flush_altivec_to_thread(target);
- flush_tmregs_to_thread(target);
ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
&target->thread.ckpt_regs,
@@ -990,9 +847,9 @@ static int tm_cgpr_set(struct task_struct *target,
if (!MSR_TM_ACTIVE(target->thread.regs->msr))
return -ENODATA;
+ flush_tmregs_to_thread(target);
flush_fp_to_thread(target);
flush_altivec_to_thread(target);
- flush_tmregs_to_thread(target);
ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
&target->thread.ckpt_regs,
@@ -1068,7 +925,7 @@ static int tm_cfpr_active(struct task_struct *target,
*
* This function gets in transaction checkpointed FPR registers.
*
- * When the transaction is active 'fp_state' holds the checkpointed
+ * When the transaction is active 'transact_fp' holds the checkpointed
* values for the current transaction to fall back on if it aborts
* in between. This function gets those checkpointed FPR registers.
* The userspace interface buffer layout is as follows.
@@ -1092,14 +949,14 @@ static int tm_cfpr_get(struct task_struct *target,
if (!MSR_TM_ACTIVE(target->thread.regs->msr))
return -ENODATA;
+ flush_tmregs_to_thread(target);
flush_fp_to_thread(target);
flush_altivec_to_thread(target);
- flush_tmregs_to_thread(target);
/* copy to local buffer then write that out */
for (i = 0; i < 32 ; i++)
- buf[i] = target->thread.TS_FPR(i);
- buf[32] = target->thread.fp_state.fpscr;
+ buf[i] = target->thread.TS_TRANS_FPR(i);
+ buf[32] = target->thread.transact_fp.fpscr;
return user_regset_copyout(&pos, &count, &kbuf, &ubuf, buf, 0, -1);
}
@@ -1114,7 +971,7 @@ static int tm_cfpr_get(struct task_struct *target,
*
* This function sets in transaction checkpointed FPR registers.
*
- * When the transaction is active 'fp_state' holds the checkpointed
+ * When the transaction is active 'transact_fp' holds the checkpointed
* FPR register values for the current transaction to fall back on
* if it aborts in between. This function sets these checkpointed
* FPR registers. The userspace interface buffer layout is as follows.
@@ -1138,17 +995,17 @@ static int tm_cfpr_set(struct task_struct *target,
if (!MSR_TM_ACTIVE(target->thread.regs->msr))
return -ENODATA;
+ flush_tmregs_to_thread(target);
flush_fp_to_thread(target);
flush_altivec_to_thread(target);
- flush_tmregs_to_thread(target);
/* copy to local buffer then write that out */
i = user_regset_copyin(&pos, &count, &kbuf, &ubuf, buf, 0, -1);
if (i)
return i;
for (i = 0; i < 32 ; i++)
- target->thread.TS_FPR(i) = buf[i];
- target->thread.fp_state.fpscr = buf[32];
+ target->thread.TS_TRANS_FPR(i) = buf[i];
+ target->thread.transact_fp.fpscr = buf[32];
return 0;
}
@@ -1183,7 +1040,7 @@ static int tm_cvmx_active(struct task_struct *target,
*
* This function gets in transaction checkpointed VMX registers.
*
- * When the transaction is active 'vr_state' and 'vr_save' hold
+ * When the transaction is active 'transact_vr' and 'transact_vrsave' hold
* the checkpointed values for the current transaction to fall
* back on if it aborts in between. The userspace interface buffer
* layout is as follows.
@@ -1210,12 +1067,12 @@ static int tm_cvmx_get(struct task_struct *target,
return -ENODATA;
/* Flush the state */
+ flush_tmregs_to_thread(target);
flush_fp_to_thread(target);
flush_altivec_to_thread(target);
- flush_tmregs_to_thread(target);
ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
- &target->thread.vr_state, 0,
+ &target->thread.transact_vr, 0,
33 * sizeof(vector128));
if (!ret) {
/*
@@ -1226,7 +1083,7 @@ static int tm_cvmx_get(struct task_struct *target,
u32 word;
} vrsave;
memset(&vrsave, 0, sizeof(vrsave));
- vrsave.word = target->thread.vrsave;
+ vrsave.word = target->thread.transact_vrsave;
ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, &vrsave,
33 * sizeof(vector128), -1);
}
@@ -1245,7 +1102,7 @@ static int tm_cvmx_get(struct task_struct *target,
*
* This function sets in transaction checkpointed VMX registers.
*
- * When the transaction is active 'vr_state' and 'vr_save' hold
+ * When the transaction is active 'transact_vr' and 'transact_vrsave' hold
* the checkpointed values for the current transaction to fall
* back on if it aborts in between. The userspace interface buffer
* layout is as follows.
@@ -1271,12 +1128,12 @@ static int tm_cvmx_set(struct task_struct *target,
if (!MSR_TM_ACTIVE(target->thread.regs->msr))
return -ENODATA;
+ flush_tmregs_to_thread(target);
flush_fp_to_thread(target);
flush_altivec_to_thread(target);
- flush_tmregs_to_thread(target);
ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
- &target->thread.vr_state, 0,
+ &target->thread.transact_vr, 0,
33 * sizeof(vector128));
if (!ret && count > 0) {
/*
@@ -1287,11 +1144,11 @@ static int tm_cvmx_set(struct task_struct *target,
u32 word;
} vrsave;
memset(&vrsave, 0, sizeof(vrsave));
- vrsave.word = target->thread.vrsave;
+ vrsave.word = target->thread.transact_vrsave;
ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &vrsave,
33 * sizeof(vector128), -1);
if (!ret)
- target->thread.vrsave = vrsave.word;
+ target->thread.transact_vrsave = vrsave.word;
}
return ret;
@@ -1329,7 +1186,7 @@ static int tm_cvsx_active(struct task_struct *target,
*
* This function gets in transaction checkpointed VSX registers.
*
- * When the transaction is active 'fp_state' holds the checkpointed
+ * When the transaction is active 'transact_fp' holds the checkpointed
* values for the current transaction to fall back on if it aborts
* in between. This function gets those checkpointed VSX registers.
* The userspace interface buffer layout is as follows.
@@ -1353,13 +1210,13 @@ static int tm_cvsx_get(struct task_struct *target,
return -ENODATA;
/* Flush the state */
+ flush_tmregs_to_thread(target);
flush_fp_to_thread(target);
flush_altivec_to_thread(target);
- flush_tmregs_to_thread(target);
flush_vsx_to_thread(target);
for (i = 0; i < 32 ; i++)
- buf[i] = target->thread.fp_state.fpr[i][TS_VSRLOWOFFSET];
+ buf[i] = target->thread.transact_fp.fpr[i][TS_VSRLOWOFFSET];
ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
buf, 0, 32 * sizeof(double));
@@ -1377,7 +1234,7 @@ static int tm_cvsx_get(struct task_struct *target,
*
* This function sets in transaction checkpointed VSX registers.
*
- * When the transaction is active 'fp_state' holds the checkpointed
+ * When the transaction is active 'transact_fp' holds the checkpointed
* VSX register values for the current transaction to fall back on
* if it aborts in between. This function sets these checkpointed
* FPR registers. The userspace interface buffer layout is as follows.
@@ -1401,15 +1258,16 @@ static int tm_cvsx_set(struct task_struct *target,
return -ENODATA;
/* Flush the state */
+ flush_tmregs_to_thread(target);
flush_fp_to_thread(target);
flush_altivec_to_thread(target);
- flush_tmregs_to_thread(target);
flush_vsx_to_thread(target);
ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
buf, 0, 32 * sizeof(double));
- for (i = 0; i < 32 ; i++)
- target->thread.fp_state.fpr[i][TS_VSRLOWOFFSET] = buf[i];
+ if (!ret)
+ for (i = 0; i < 32 ; i++)
+ target->thread.transact_fp.fpr[i][TS_VSRLOWOFFSET] = buf[i];
return ret;
}
@@ -1465,9 +1323,9 @@ static int tm_spr_get(struct task_struct *target,
return -ENODEV;
/* Flush the states */
+ flush_tmregs_to_thread(target);
flush_fp_to_thread(target);
flush_altivec_to_thread(target);
- flush_tmregs_to_thread(target);
/* TFHAR register */
ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
@@ -1521,9 +1379,9 @@ static int tm_spr_set(struct task_struct *target,
return -ENODEV;
/* Flush the states */
+ flush_tmregs_to_thread(target);
flush_fp_to_thread(target);
flush_altivec_to_thread(target);
- flush_tmregs_to_thread(target);
/* TFHAR register */
ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c
index d11cc9d..84957d5 100644
--- a/arch/powerpc/kernel/signal_32.c
+++ b/arch/powerpc/kernel/signal_32.c
@@ -525,9 +525,6 @@ static int save_tm_user_regs(struct pt_regs *regs,
*/
regs->msr &= ~MSR_TS_MASK;
- /* Make sure floating point registers are stored in regs */
- flush_fp_to_thread(current);
-
/* Save both sets of general registers */
if (save_general_regs(¤t->thread.ckpt_regs, frame)
|| save_general_regs(regs, tm_frame))
@@ -545,18 +542,17 @@ static int save_tm_user_regs(struct pt_regs *regs,
#ifdef CONFIG_ALTIVEC
/* save altivec registers */
if (current->thread.used_vr) {
- flush_altivec_to_thread(current);
- if (__copy_to_user(&frame->mc_vregs, ¤t->thread.vr_state,
+ if (__copy_to_user(&frame->mc_vregs, ¤t->thread.transact_vr,
ELF_NVRREG * sizeof(vector128)))
return 1;
if (msr & MSR_VEC) {
if (__copy_to_user(&tm_frame->mc_vregs,
- ¤t->thread.transact_vr,
+ ¤t->thread.vr_state,
ELF_NVRREG * sizeof(vector128)))
return 1;
} else {
if (__copy_to_user(&tm_frame->mc_vregs,
- ¤t->thread.vr_state,
+ ¤t->thread.transact_vr,
ELF_NVRREG * sizeof(vector128)))
return 1;
}
@@ -573,28 +569,28 @@ static int save_tm_user_regs(struct pt_regs *regs,
* most significant bits of that same vector. --BenH
*/
if (cpu_has_feature(CPU_FTR_ALTIVEC))
- current->thread.vrsave = mfspr(SPRN_VRSAVE);
- if (__put_user(current->thread.vrsave,
+ current->thread.transact_vrsave = mfspr(SPRN_VRSAVE);
+ if (__put_user(current->thread.transact_vrsave,
(u32 __user *)&frame->mc_vregs[32]))
return 1;
if (msr & MSR_VEC) {
- if (__put_user(current->thread.transact_vrsave,
+ if (__put_user(current->thread.vrsave,
(u32 __user *)&tm_frame->mc_vregs[32]))
return 1;
} else {
- if (__put_user(current->thread.vrsave,
+ if (__put_user(current->thread.transact_vrsave,
(u32 __user *)&tm_frame->mc_vregs[32]))
return 1;
}
#endif /* CONFIG_ALTIVEC */
- if (copy_fpr_to_user(&frame->mc_fregs, current))
+ if (copy_transact_fpr_to_user(&frame->mc_fregs, current))
return 1;
if (msr & MSR_FP) {
- if (copy_transact_fpr_to_user(&tm_frame->mc_fregs, current))
+ if (copy_fpr_to_user(&tm_frame->mc_fregs, current))
return 1;
} else {
- if (copy_fpr_to_user(&tm_frame->mc_fregs, current))
+ if (copy_transact_fpr_to_user(&tm_frame->mc_fregs, current))
return 1;
}
@@ -606,15 +602,14 @@ static int save_tm_user_regs(struct pt_regs *regs,
* contains valid data
*/
if (current->thread.used_vsr) {
- flush_vsx_to_thread(current);
- if (copy_vsx_to_user(&frame->mc_vsregs, current))
+ if (copy_transact_vsx_to_user(&frame->mc_vsregs, current))
return 1;
if (msr & MSR_VSX) {
- if (copy_transact_vsx_to_user(&tm_frame->mc_vsregs,
+ if (copy_vsx_to_user(&tm_frame->mc_vsregs,
current))
return 1;
} else {
- if (copy_vsx_to_user(&tm_frame->mc_vsregs, current))
+ if (copy_transact_vsx_to_user(&tm_frame->mc_vsregs, current))
return 1;
}
@@ -793,9 +788,9 @@ static long restore_tm_user_regs(struct pt_regs *regs,
regs->msr &= ~MSR_VEC;
if (msr & MSR_VEC) {
/* restore altivec registers from the stack */
- if (__copy_from_user(¤t->thread.vr_state, &sr->mc_vregs,
+ if (__copy_from_user(¤t->thread.transact_vr, &sr->mc_vregs,
sizeof(sr->mc_vregs)) ||
- __copy_from_user(¤t->thread.transact_vr,
+ __copy_from_user(¤t->thread.vr_state,
&tm_sr->mc_vregs,
sizeof(sr->mc_vregs)))
return 1;
@@ -807,13 +802,13 @@ static long restore_tm_user_regs(struct pt_regs *regs,
}
/* Always get VRSAVE back */
- if (__get_user(current->thread.vrsave,
+ if (__get_user(current->thread.transact_vrsave,
(u32 __user *)&sr->mc_vregs[32]) ||
- __get_user(current->thread.transact_vrsave,
+ __get_user(current->thread.vrsave,
(u32 __user *)&tm_sr->mc_vregs[32]))
return 1;
if (cpu_has_feature(CPU_FTR_ALTIVEC))
- mtspr(SPRN_VRSAVE, current->thread.vrsave);
+ mtspr(SPRN_VRSAVE, current->thread.transact_vrsave);
#endif /* CONFIG_ALTIVEC */
regs->msr &= ~(MSR_FP | MSR_FE0 | MSR_FE1);
@@ -829,8 +824,8 @@ static long restore_tm_user_regs(struct pt_regs *regs,
* Restore altivec registers from the stack to a local
* buffer, then write this out to the thread_struct
*/
- if (copy_vsx_from_user(current, &sr->mc_vsregs) ||
- copy_transact_vsx_from_user(current, &tm_sr->mc_vsregs))
+ if (copy_vsx_from_user(current, &tm_sr->mc_vsregs) ||
+ copy_transact_vsx_from_user(current, &sr->mc_vsregs))
return 1;
} else if (current->thread.used_vsr)
for (i = 0; i < 32 ; i++) {
@@ -877,13 +872,14 @@ static long restore_tm_user_regs(struct pt_regs *regs,
tm_recheckpoint(¤t->thread, msr);
/* This loads the speculative FP/VEC state, if used */
+ msr_check_and_set(msr & (MSR_FP | MSR_VEC));
if (msr & MSR_FP) {
- do_load_up_transact_fpu(¤t->thread);
+ load_fp_state(¤t->thread.fp_state);
regs->msr |= (MSR_FP | current->thread.fpexc_mode);
}
#ifdef CONFIG_ALTIVEC
if (msr & MSR_VEC) {
- do_load_up_transact_altivec(¤t->thread);
+ load_vr_state(¤t->thread.vr_state);
regs->msr |= MSR_VEC;
}
#endif
diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c
index 6c1f99b..ed8c651 100644
--- a/arch/powerpc/kernel/signal_64.c
+++ b/arch/powerpc/kernel/signal_64.c
@@ -220,28 +220,25 @@ static long setup_tm_sigcontexts(struct sigcontext __user *sc,
*/
regs->msr &= ~MSR_TS_MASK;
- flush_fp_to_thread(tsk);
-
#ifdef CONFIG_ALTIVEC
err |= __put_user(v_regs, &sc->v_regs);
err |= __put_user(tm_v_regs, &tm_sc->v_regs);
/* save altivec registers */
if (tsk->thread.used_vr) {
- flush_altivec_to_thread(tsk);
/* Copy 33 vec registers (vr0..31 and vscr) to the stack */
- err |= __copy_to_user(v_regs, &tsk->thread.vr_state,
+ err |= __copy_to_user(v_regs, &tsk->thread.transact_vr,
33 * sizeof(vector128));
/* If VEC was enabled there are transactional VRs valid too,
* else they're a copy of the checkpointed VRs.
*/
if (msr & MSR_VEC)
err |= __copy_to_user(tm_v_regs,
- &tsk->thread.transact_vr,
+ &tsk->thread.vr_state,
33 * sizeof(vector128));
else
err |= __copy_to_user(tm_v_regs,
- &tsk->thread.vr_state,
+ &tsk->thread.transact_vr,
33 * sizeof(vector128));
/* set MSR_VEC in the MSR value in the frame to indicate
@@ -253,13 +250,13 @@ static long setup_tm_sigcontexts(struct sigcontext __user *sc,
* use altivec.
*/
if (cpu_has_feature(CPU_FTR_ALTIVEC))
- tsk->thread.vrsave = mfspr(SPRN_VRSAVE);
- err |= __put_user(tsk->thread.vrsave, (u32 __user *)&v_regs[33]);
+ tsk->thread.transact_vrsave = mfspr(SPRN_VRSAVE);
+ err |= __put_user(tsk->thread.transact_vrsave, (u32 __user *)&v_regs[33]);
if (msr & MSR_VEC)
- err |= __put_user(tsk->thread.transact_vrsave,
+ err |= __put_user(tsk->thread.vrsave,
(u32 __user *)&tm_v_regs[33]);
else
- err |= __put_user(tsk->thread.vrsave,
+ err |= __put_user(tsk->thread.transact_vrsave,
(u32 __user *)&tm_v_regs[33]);
#else /* CONFIG_ALTIVEC */
@@ -268,11 +265,11 @@ static long setup_tm_sigcontexts(struct sigcontext __user *sc,
#endif /* CONFIG_ALTIVEC */
/* copy fpr regs and fpscr */
- err |= copy_fpr_to_user(&sc->fp_regs, tsk);
+ err |= copy_transact_fpr_to_user(&sc->fp_regs, tsk);
if (msr & MSR_FP)
- err |= copy_transact_fpr_to_user(&tm_sc->fp_regs, tsk);
+ err |= copy_fpr_to_user(&tm_sc->fp_regs, tsk);
else
- err |= copy_fpr_to_user(&tm_sc->fp_regs, tsl);
+ err |= copy_transact_fpr_to_user(&tm_sc->fp_regs, tsk);
#ifdef CONFIG_VSX
/*
@@ -281,16 +278,15 @@ static long setup_tm_sigcontexts(struct sigcontext __user *sc,
* VMX data.
*/
if (tsk->thread.used_vsr) {
- flush_vsx_to_thread(tsk);
v_regs += ELF_NVRREG;
tm_v_regs += ELF_NVRREG;
- err |= copy_vsx_to_user(v_regs, tsk);
+ err |= copy_transact_vsx_to_user(v_regs, tsk);
if (msr & MSR_VSX)
- err |= copy_transact_vsx_to_user(tm_v_regs, tsk);
- else
err |= copy_vsx_to_user(tm_v_regs, tsk);
+ else
+ err |= copy_transact_vsx_to_user(tm_v_regs, tsk);
/* set MSR_VSX in the MSR value in the frame to
* indicate that sc->vs_reg) contains valid data.
@@ -496,9 +492,9 @@ static long restore_tm_sigcontexts(struct task_struct *tsk,
return -EFAULT;
/* Copy 33 vec registers (vr0..31 and vscr) from the stack */
if (v_regs != NULL && tm_v_regs != NULL && (msr & MSR_VEC) != 0) {
- err |= __copy_from_user(&tsk->thread.vr_state, v_regs,
+ err |= __copy_from_user(&tsk->thread.transact_vr, v_regs,
33 * sizeof(vector128));
- err |= __copy_from_user(&tsk->thread.transact_vr, tm_v_regs,
+ err |= __copy_from_user(&tsk->thread.vr_state, tm_v_regs,
33 * sizeof(vector128));
}
else if (tsk->thread.used_vr) {
@@ -507,9 +503,9 @@ static long restore_tm_sigcontexts(struct task_struct *tsk,
}
/* Always get VRSAVE back */
if (v_regs != NULL && tm_v_regs != NULL) {
- err |= __get_user(tsk->thread.vrsave,
- (u32 __user *)&v_regs[33]);
err |= __get_user(tsk->thread.transact_vrsave,
+ (u32 __user *)&v_regs[33]);
+ err |= __get_user(tsk->thread.vrsave,
(u32 __user *)&tm_v_regs[33]);
}
else {
@@ -520,8 +516,8 @@ static long restore_tm_sigcontexts(struct task_struct *tsk,
mtspr(SPRN_VRSAVE, tsk->thread.vrsave);
#endif /* CONFIG_ALTIVEC */
/* restore floating point */
- err |= copy_fpr_from_user(tsk, &sc->fp_regs);
- err |= copy_transact_fpr_from_user(tsk, &tm_sc->fp_regs);
+ err |= copy_fpr_from_user(tsk, &tm_sc->fp_regs);
+ err |= copy_transact_fpr_from_user(tsk, &sc->fp_regs);
#ifdef CONFIG_VSX
/*
* Get additional VSX data. Update v_regs to point after the
@@ -531,8 +527,8 @@ static long restore_tm_sigcontexts(struct task_struct *tsk,
if (v_regs && ((msr & MSR_VSX) != 0)) {
v_regs += ELF_NVRREG;
tm_v_regs += ELF_NVRREG;
- err |= copy_vsx_from_user(tsk, v_regs);
- err |= copy_transact_vsx_from_user(tsk, tm_v_regs);
+ err |= copy_vsx_from_user(tsk, tm_v_regs);
+ err |= copy_transact_vsx_from_user(tsk, v_regs);
} else {
for (i = 0; i < 32 ; i++) {
tsk->thread.fp_state.fpr[i][TS_VSRLOWOFFSET] = 0;
@@ -546,17 +542,15 @@ static long restore_tm_sigcontexts(struct task_struct *tsk,
/* This loads the checkpointed FP/VEC state, if used */
tm_recheckpoint(&tsk->thread, msr);
- /* This loads the speculative FP/VEC state, if used */
+ msr_check_and_set(msr & (MSR_FP | MSR_VEC));
if (msr & MSR_FP) {
- do_load_up_transact_fpu(&tsk->thread);
+ load_fp_state(&tsk->thread.fp_state);
regs->msr |= (MSR_FP | tsk->thread.fpexc_mode);
}
-#ifdef CONFIG_ALTIVEC
if (msr & MSR_VEC) {
- do_load_up_transact_altivec(&tsk->thread);
+ load_vr_state(&tsk->thread.vr_state);
regs->msr |= MSR_VEC;
}
-#endif
return err;
}
diff --git a/arch/powerpc/kernel/tm.S b/arch/powerpc/kernel/tm.S
index 298afcf..7b7088d 100644
--- a/arch/powerpc/kernel/tm.S
+++ b/arch/powerpc/kernel/tm.S
@@ -108,6 +108,7 @@ _GLOBAL(tm_reclaim)
/* We've a struct pt_regs at [r1+STACK_FRAME_OVERHEAD]. */
std r3, STK_PARAM(R3)(r1)
+ std r4, STK_PARAM(R4)(r1)
SAVE_NVGPRS(r1)
/* We need to setup MSR for VSX register save instructions. */
@@ -126,43 +127,6 @@ _GLOBAL(tm_reclaim)
mtmsrd r15
std r14, TM_FRAME_L0(r1)
- /* Stash the stack pointer away for use after reclaim */
- std r1, PACAR1(r13)
-
- /* ******************** FPR/VR/VSRs ************
- * Before reclaiming, capture the current/transactional FPR/VR
- * versions /if used/.
- *
- * (If VSX used, FP and VMX are implied. Or, we don't need to look
- * at MSR.VSX as copying FP regs if .FP, vector regs if .VMX covers it.)
- *
- * We're passed the thread's MSR as parameter 2.
- *
- * We enabled VEC/FP/VSX in the msr above, so we can execute these
- * instructions!
- */
- andis. r0, r4, MSR_VEC at h
- beq dont_backup_vec
-
- addi r7, r3, THREAD_TRANSACT_VRSTATE
- SAVE_32VRS(0, r6, r7) /* r6 scratch, r7 transact vr state */
- mfvscr v0
- li r6, VRSTATE_VSCR
- stvx v0, r7, r6
-dont_backup_vec:
- mfspr r0, SPRN_VRSAVE
- std r0, THREAD_TRANSACT_VRSAVE(r3)
-
- andi. r0, r4, MSR_FP
- beq dont_backup_fp
-
- addi r7, r3, THREAD_TRANSACT_FPSTATE
- SAVE_32FPRS_VSRS(0, R6, R7) /* r6 scratch, r7 transact fp state */
-
- mffs fr0
- stfd fr0,FPSTATE_FPSCR(r7)
-
-dont_backup_fp:
/* Do sanity check on MSR to make sure we are suspended */
li r7, (MSR_TS_S)@higher
srdi r6, r14, 32
@@ -170,6 +134,9 @@ dont_backup_fp:
1: tdeqi r6, 0
EMIT_BUG_ENTRY 1b,__FILE__,__LINE__,0
+ /* Stash the stack pointer away for use after reclaim */
+ std r1, PACAR1(r13)
+
/* Clear MSR RI since we are about to change r1, EE is already off. */
li r4, 0
mtmsrd r4, 1
@@ -273,6 +240,43 @@ dont_backup_fp:
* MSR.
*/
+
+ /* ******************** FPR/VR/VSRs ************
+ * After reclaiming, capture the checkpointed FPRs/VRs /if used/.
+ *
+ * (If VSX used, FP and VMX are implied. Or, we don't need to look
+ * at MSR.VSX as copying FP regs if .FP, vector regs if .VMX covers it.)
+ *
+ * We're passed the thread's MSR as the second parameter
+ *
+ * We enabled VEC/FP/VSX in the msr above, so we can execute these
+ * instructions!
+ */
+ ld r4, STK_PARAM(R4)(r1) /* Second parameter, MSR * */
+ mr r3, r12
+ andis. r0, r4, MSR_VEC at h
+ beq dont_backup_vec
+
+ addi r7, r3, THREAD_TRANSACT_VRSTATE
+ SAVE_32VRS(0, r6, r7) /* r6 scratch, r7 transact vr state */
+ mfvscr v0
+ li r6, VRSTATE_VSCR
+ stvx v0, r7, r6
+dont_backup_vec:
+ mfspr r0, SPRN_VRSAVE
+ std r0, THREAD_TRANSACT_VRSAVE(r3)
+
+ andi. r0, r4, MSR_FP
+ beq dont_backup_fp
+
+ addi r7, r3, THREAD_TRANSACT_FPSTATE
+ SAVE_32FPRS_VSRS(0, R6, R7) /* r6 scratch, r7 transact fp state */
+
+ mffs fr0
+ stfd fr0,FPSTATE_FPSCR(r7)
+
+dont_backup_fp:
+
/* TM regs, incl TEXASR -- these live in thread_struct. Note they've
* been updated by the treclaim, to explain to userland the failure
* cause (aborted).
@@ -288,6 +292,7 @@ dont_backup_fp:
/* Restore original MSR/IRQ state & clear TM mode */
ld r14, TM_FRAME_L0(r1) /* Orig MSR */
+
li r15, 0
rldimi r14, r15, MSR_TS_LG, (63-MSR_TS_LG)-1
mtmsrd r14
@@ -356,28 +361,29 @@ _GLOBAL(__tm_recheckpoint)
mtmsr r5
#ifdef CONFIG_ALTIVEC
- /* FP and VEC registers: These are recheckpointed from thread.fpr[]
- * and thread.vr[] respectively. The thread.transact_fpr[] version
- * is more modern, and will be loaded subsequently by any FPUnavailable
- * trap.
+ /*
+ * FP and VEC registers: These are recheckpointed from
+ * thread.ckfp_state and thread.ckvr_state respectively. The
+ * thread.fp_state[] version holds the 'live' (transactional)
+ * and will be loaded subsequently by any FPUnavailable trap.
*/
andis. r0, r4, MSR_VEC at h
beq dont_restore_vec
- addi r8, r3, THREAD_VRSTATE
+ addi r8, r3, THREAD_TRANSACT_VRSTATE
li r5, VRSTATE_VSCR
lvx v0, r8, r5
mtvscr v0
REST_32VRS(0, r5, r8) /* r5 scratch, r8 ptr */
dont_restore_vec:
- ld r5, THREAD_VRSAVE(r3)
+ ld r5, THREAD_TRANSACT_VRSAVE(r3)
mtspr SPRN_VRSAVE, r5
#endif
andi. r0, r4, MSR_FP
beq dont_restore_fp
- addi r8, r3, THREAD_FPSTATE
+ addi r8, r3, THREAD_TRANSACT_FPSTATE
lfd fr0, FPSTATE_FPSCR(r8)
MTFSF_L(fr0)
REST_32FPRS_VSRS(0, R4, R8)
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index 2cb5892..ec1f743 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -1503,7 +1503,8 @@ void fp_unavailable_tm(struct pt_regs *regs)
/* If VMX is in use, get the transactional values back */
if (regs->msr & MSR_VEC) {
- do_load_up_transact_altivec(¤t->thread);
+ msr_check_and_set(MSR_VEC);
+ load_vr_state(¤t->thread.vr_state);
/* At this point all the VSX state is loaded, so enable it */
regs->msr |= MSR_VSX;
}
@@ -1524,7 +1525,8 @@ void altivec_unavailable_tm(struct pt_regs *regs)
current->thread.used_vr = 1;
if (regs->msr & MSR_FP) {
- do_load_up_transact_fpu(¤t->thread);
+ msr_check_and_set(MSR_FP);
+ load_fp_state(¤t->thread.fp_state);
regs->msr |= MSR_VSX;
}
}
@@ -1563,10 +1565,12 @@ void vsx_unavailable_tm(struct pt_regs *regs)
*/
tm_recheckpoint(¤t->thread, regs->msr & ~orig_msr);
+ msr_check_and_set(orig_msr & (MSR_FP | MSR_VEC));
+
if (orig_msr & MSR_FP)
- do_load_up_transact_fpu(¤t->thread);
+ load_fp_state(¤t->thread.fp_state);
if (orig_msr & MSR_VEC)
- do_load_up_transact_altivec(¤t->thread);
+ load_vr_state(¤t->thread.vr_state);
}
#endif /* CONFIG_PPC_TRANSACTIONAL_MEM */
--
2.9.3
More information about the Linuxppc-dev
mailing list