[PATCH] i2c: don't print error when adding adapter fails

Guenter Roeck linux at roeck-us.net
Tue Aug 9 23:31:40 AEST 2016


On 08/09/2016 04:36 AM, Wolfram Sang wrote:
> The core will do this for us now.
>
> Signed-off-by: Wolfram Sang <wsa-dev at sang-engineering.com>
> ---
[ ... ]

> diff --git a/drivers/i2c/busses/i2c-uniphier-f.c b/drivers/i2c/busses/i2c-uniphier-f.c
> index aeead0d27d1007..64318e69089439 100644
> --- a/drivers/i2c/busses/i2c-uniphier-f.c
> +++ b/drivers/i2c/busses/i2c-uniphier-f.c
> @@ -550,15 +550,10 @@ static int uniphier_fi2c_probe(struct platform_device *pdev)
>  	}
>
>  	ret = i2c_add_adapter(&priv->adap);
> -	if (ret) {
> -		dev_err(dev, "failed to add I2C adapter\n");
> -		goto err;
> -	}
> -
> -err:
>  	if (ret)
>  		clk_disable_unprepare(priv->clk);
>
> + err:

You sure about that one ? It leaves the clock enabled in some of the error paths.

>  	return ret;
>  }
>
> diff --git a/drivers/i2c/busses/i2c-uniphier.c b/drivers/i2c/busses/i2c-uniphier.c
> index 475a5eb514e215..94f64cccfdef08 100644
> --- a/drivers/i2c/busses/i2c-uniphier.c
> +++ b/drivers/i2c/busses/i2c-uniphier.c
> @@ -407,15 +407,10 @@ static int uniphier_i2c_probe(struct platform_device *pdev)
>  	}
>
>  	ret = i2c_add_adapter(&priv->adap);
> -	if (ret) {
> -		dev_err(dev, "failed to add I2C adapter\n");
> -		goto err;
> -	}
> -
> -err:
>  	if (ret)
>  		clk_disable_unprepare(priv->clk);
>
> + err:

Same as above.

Note: I dropped all individuals from Cc:; my mailer refused to accept the reply because there
were too many.

Guenter

>  	return ret;
>  }
>



More information about the Linuxppc-dev mailing list