[PATCH v3 1/5] powerpc/dts: add mcke-gpios for PM feature

[Chenhui Zhao]

Signed-off-by: Chenhui Zhao <chenhui.zhao at nxp.com>
---
 Documentation/devicetree/bindings/soc/fsl/rcpm.txt | 13 +++++++++++++
 arch/powerpc/boot/dts/fsl/t1040si-post.dtsi        |  3 +++
 2 files changed, 16 insertions(+)

diff --git a/Documentation/devicetree/bindings/soc/fsl/rcpm.txt b/Documentation/devicetree/bindings/soc/fsl/rcpm.txt
index e284e4e..1d44a80 100644
--- a/Documentation/devicetree/bindings/soc/fsl/rcpm.txt
+++ b/Documentation/devicetree/bindings/soc/fsl/rcpm.txt
@@ -21,6 +21,10 @@ Required properites:
 	* "fsl,qoriq-rcpm-2.0": for chassis 2.0 rcpm
 	* "fsl,qoriq-rcpm-2.1": for chassis 2.1 rcpm
 
+Optional properites:
+  - mcke-gpios : The GPIO pin is used for keeping the MCKE signal of DDR modules
+		 low in the LPM35 state on some platforms, such as T1040.
+
 All references to "1.0" and "2.0" refer to the QorIQ chassis version to
 which the chip complies.
 Chassis Version		Example Chips
@@ -37,6 +41,15 @@ The RCPM node for T4240:
 		fsl,#rcpm-wakeup-cells = <2>;
 	};
 
+The RCPM node for T1040 (which supports LPM35 state):
+	rcpm: global-utilities at e2000 {
+		compatible = "fsl,t1040-rcpm", "fsl,qoriq-rcpm-2.1";
+		reg = <0xe2000 0x1000>;
+		fsl,#rcpm-wakeup-cells = <1>;
+		mcke-gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>
+	};
+
+
 * Freescale RCPM Wakeup Source Device Tree Bindings
 -------------------------------------------
 Required fsl,rcpm-wakeup property should be added to a device node if the device
diff --git a/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi
index 507649e..f66e7dd 100644
--- a/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi
@@ -33,6 +33,7 @@
  */
 
 #include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/gpio/gpio.h>
 
 &bman_fbpr {
 	compatible = "fsl,bman-fbpr";
@@ -474,6 +475,8 @@
 	rcpm: global-utilities at e2000 {
 		compatible = "fsl,t1040-rcpm", "fsl,qoriq-rcpm-2.1";
 		reg = <0xe2000 0x1000>;
+		fsl,#rcpm-wakeup-cells = <1>;
+		mcke-gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
 	};
 
 	sfp: sfp at e8000 {
-- 
1.9.1