[PATCH 2/2] powerpc: Make selects of IBM_EMAC_* depend on IBM_EMAC
Michael Ellerman
mpe at ellerman.id.au
Mon Aug 1 20:55:08 AEST 2016
We have a bunch of Kconfig symbols which select various IBM_EMAC_*
symbols. These all cause warnings when IBM_EMAC is not selected.
eg.
warning: (PPC_CELL_NATIVE && BLUESTONE && CANYONLANDS && GLACIER &&
EIGER && 440EPX && 440GRX && 440GX && 460SX && 405EX) selects
IBM_EMAC_RGMII which has unmet direct dependencies (NETDEVICES &&
ETHERNET && NET_VENDOR_IBM)
So make them all depend on IBM_EMAC being enabled first.
Signed-off-by: Michael Ellerman <mpe at ellerman.id.au>
---
arch/powerpc/platforms/40x/Kconfig | 12 ++++----
arch/powerpc/platforms/44x/Kconfig | 56 ++++++++++++++++++-------------------
arch/powerpc/platforms/cell/Kconfig | 8 +++---
3 files changed, 38 insertions(+), 38 deletions(-)
diff --git a/arch/powerpc/platforms/40x/Kconfig b/arch/powerpc/platforms/40x/Kconfig
index e3257f24a8a1..f8d1410aa5bb 100644
--- a/arch/powerpc/platforms/40x/Kconfig
+++ b/arch/powerpc/platforms/40x/Kconfig
@@ -102,18 +102,18 @@ config 405GP
bool
select IBM405_ERR77
select IBM405_ERR51
- select IBM_EMAC_ZMII
+ select IBM_EMAC_ZMII if IBM_EMAC
config 405EX
bool
- select IBM_EMAC_EMAC4
- select IBM_EMAC_RGMII
+ select IBM_EMAC_EMAC4 if IBM_EMAC
+ select IBM_EMAC_RGMII if IBM_EMAC
config 405EZ
bool
- select IBM_EMAC_NO_FLOW_CTRL
- select IBM_EMAC_MAL_CLR_ICINTSTAT
- select IBM_EMAC_MAL_COMMON_ERR
+ select IBM_EMAC_NO_FLOW_CTRL if IBM_EMAC
+ select IBM_EMAC_MAL_CLR_ICINTSTAT if IBM_EMAC
+ select IBM_EMAC_MAL_COMMON_ERR if IBM_EMAC
config XILINX_VIRTEX
bool
diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig
index 48fc18041ff6..8d18669856f9 100644
--- a/arch/powerpc/platforms/44x/Kconfig
+++ b/arch/powerpc/platforms/44x/Kconfig
@@ -26,7 +26,7 @@ config BLUESTONE
select PCI_MSI
select PPC4xx_MSI
select PPC4xx_PCI_EXPRESS
- select IBM_EMAC_RGMII
+ select IBM_EMAC_RGMII if IBM_EMAC
help
This option enables support for the APM APM821xx Evaluation board.
@@ -125,8 +125,8 @@ config CANYONLANDS
select PPC4xx_PCI_EXPRESS
select PCI_MSI
select PPC4xx_MSI
- select IBM_EMAC_RGMII
- select IBM_EMAC_ZMII
+ select IBM_EMAC_RGMII if IBM_EMAC
+ select IBM_EMAC_ZMII if IBM_EMAC
help
This option enables support for the AMCC PPC460EX evaluation board.
@@ -138,8 +138,8 @@ config GLACIER
select 460EX # Odd since it uses 460GT but the effects are the same
select PCI
select PPC4xx_PCI_EXPRESS
- select IBM_EMAC_RGMII
- select IBM_EMAC_ZMII
+ select IBM_EMAC_RGMII if IBM_EMAC
+ select IBM_EMAC_ZMII if IBM_EMAC
help
This option enables support for the AMCC PPC460GT evaluation board.
@@ -164,7 +164,7 @@ config EIGER
select 460SX
select PCI
select PPC4xx_PCI_EXPRESS
- select IBM_EMAC_RGMII
+ select IBM_EMAC_RGMII if IBM_EMAC
help
This option enables support for the AMCC PPC460SX evaluation board.
@@ -213,7 +213,7 @@ config AKEBONO
select NETDEVICES
select ETHERNET
select NET_VENDOR_IBM
- select IBM_EMAC_EMAC4
+ select IBM_EMAC_EMAC4 if IBM_EMAC
select USB if USB_SUPPORT
select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD
select USB_EHCI_HCD_PLATFORM if USB_EHCI_HCD
@@ -290,54 +290,54 @@ config 440EP
bool
select PPC_FPU
select IBM440EP_ERR42
- select IBM_EMAC_ZMII
+ select IBM_EMAC_ZMII if IBM_EMAC
config 440EPX
bool
select PPC_FPU
- select IBM_EMAC_EMAC4
- select IBM_EMAC_RGMII
- select IBM_EMAC_ZMII
+ select IBM_EMAC_EMAC4 if IBM_EMAC
+ select IBM_EMAC_RGMII if IBM_EMAC
+ select IBM_EMAC_ZMII if IBM_EMAC
select USB_EHCI_BIG_ENDIAN_MMIO
select USB_EHCI_BIG_ENDIAN_DESC
config 440GRX
bool
- select IBM_EMAC_EMAC4
- select IBM_EMAC_RGMII
- select IBM_EMAC_ZMII
+ select IBM_EMAC_EMAC4 if IBM_EMAC
+ select IBM_EMAC_RGMII if IBM_EMAC
+ select IBM_EMAC_ZMII if IBM_EMAC
config 440GP
bool
- select IBM_EMAC_ZMII
+ select IBM_EMAC_ZMII if IBM_EMAC
config 440GX
bool
- select IBM_EMAC_EMAC4
- select IBM_EMAC_RGMII
- select IBM_EMAC_ZMII #test only
- select IBM_EMAC_TAH #test only
+ select IBM_EMAC_EMAC4 if IBM_EMAC
+ select IBM_EMAC_RGMII if IBM_EMAC
+ select IBM_EMAC_ZMII if IBM_EMAC #test only
+ select IBM_EMAC_TAH if IBM_EMAC #test only
config 440SP
bool
config 440SPe
bool
- select IBM_EMAC_EMAC4
+ select IBM_EMAC_EMAC4 if IBM_EMAC
config 460EX
bool
select PPC_FPU
- select IBM_EMAC_EMAC4
- select IBM_EMAC_TAH
+ select IBM_EMAC_EMAC4 if IBM_EMAC
+ select IBM_EMAC_TAH if IBM_EMAC
config 460SX
bool
select PPC_FPU
- select IBM_EMAC_EMAC4
- select IBM_EMAC_RGMII
- select IBM_EMAC_ZMII
- select IBM_EMAC_TAH
+ select IBM_EMAC_EMAC4 if IBM_EMAC
+ select IBM_EMAC_RGMII if IBM_EMAC
+ select IBM_EMAC_ZMII if IBM_EMAC
+ select IBM_EMAC_TAH if IBM_EMAC
config 476FPE
bool
@@ -346,8 +346,8 @@ config 476FPE
config APM821xx
bool
select PPC_FPU
- select IBM_EMAC_EMAC4
- select IBM_EMAC_TAH
+ select IBM_EMAC_EMAC4 if IBM_EMAC
+ select IBM_EMAC_TAH if IBM_EMAC
config 476FPE_ERR46
depends on 476FPE
diff --git a/arch/powerpc/platforms/cell/Kconfig b/arch/powerpc/platforms/cell/Kconfig
index 441ad3bad3db..a4522f09d65e 100644
--- a/arch/powerpc/platforms/cell/Kconfig
+++ b/arch/powerpc/platforms/cell/Kconfig
@@ -17,10 +17,10 @@ config PPC_CELL_NATIVE
select PPC_CELL_COMMON
select MPIC
select PPC_IO_WORKAROUNDS
- select IBM_EMAC_EMAC4
- select IBM_EMAC_RGMII
- select IBM_EMAC_ZMII #test only
- select IBM_EMAC_TAH #test only
+ select IBM_EMAC_EMAC4 if IBM_EMAC
+ select IBM_EMAC_RGMII if IBM_EMAC
+ select IBM_EMAC_ZMII if IBM_EMAC #test only
+ select IBM_EMAC_TAH if IBM_EMAC #test only
default n
config PPC_IBM_CELL_BLADE
--
2.7.4
More information about the Linuxppc-dev
mailing list