[PATCH 21/31] powerpc/mm: make pte page hash index slot 8 bits
Aneesh Kumar K.V
aneesh.kumar at linux.vnet.ibm.com
Mon Sep 21 16:40:48 AEST 2015
Currently we use 4 bits for each slot and pack all the 16 slot
information related to a 64K linux page in a 64bit value. To do this
we use 16 bits of pte_t. Move the hash slot valid bit out of pte_t
and place them in the second half of pte page. We also use 8 bit
per each slot.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar at linux.vnet.ibm.com>
---
arch/powerpc/include/asm/book3s/64/hash-64k.h | 48 +++++++++++++++------------
arch/powerpc/include/asm/book3s/64/hash.h | 5 ---
arch/powerpc/include/asm/page.h | 4 +--
arch/powerpc/mm/hash64_64k.c | 34 +++++++++++++++----
4 files changed, 56 insertions(+), 35 deletions(-)
diff --git a/arch/powerpc/include/asm/book3s/64/hash-64k.h b/arch/powerpc/include/asm/book3s/64/hash-64k.h
index ced5a17a8d1a..dafc2f31c843 100644
--- a/arch/powerpc/include/asm/book3s/64/hash-64k.h
+++ b/arch/powerpc/include/asm/book3s/64/hash-64k.h
@@ -78,33 +78,39 @@
* generic accessors and iterators here
*/
#define __real_pte __real_pte
-static inline real_pte_t __real_pte(unsigned long addr, pte_t pte, pte_t *ptep)
-{
- real_pte_t rpte;
-
- rpte.pte = pte;
- rpte.hidx = 0;
- if (pte_val(pte) & _PAGE_COMBO) {
- /*
- * Make sure we order the hidx load against the _PAGE_COMBO
- * check. The store side ordering is done in __hash_page_4K
- */
- smp_rmb();
- rpte.hidx = pte_val(*((ptep) + PTRS_PER_PTE));
- }
- return rpte;
-}
-
+extern real_pte_t __real_pte(unsigned long addr, pte_t pte, pte_t *ptep);
static inline unsigned long __rpte_to_hidx(real_pte_t rpte, unsigned long index)
{
if ((pte_val(rpte.pte) & _PAGE_COMBO))
- return (rpte.hidx >> (index<<2)) & 0xf;
+ return (unsigned long) rpte.hidx[index] >> 4;
return (pte_val(rpte.pte) >> 12) & 0xf;
}
-#define __rpte_to_pte(r) ((r).pte)
-#define __rpte_sub_valid(rpte, index) \
- (pte_val(rpte.pte) & (_PAGE_HPTE_SUB0 >> (index)))
+static inline pte_t __rpte_to_pte(real_pte_t rpte)
+{
+ return rpte.pte;
+}
+/*
+ * we look at the second half of the pte page to determine whether
+ * the sub 4k hpte is valid. We use 8 bits per each index, and we have
+ * 16 index mapping full 64K page. Hence for each
+ * 64K linux page we use 128 bit from the second half of pte page.
+ * The encoding in the second half of the page is as below:
+ * [ index 15 ] .........................[index 0]
+ * [bit 127 ..................................bit 0]
+ * fomat of each index
+ * bit 7 ........ bit0
+ * [one bit secondary][ 3 bit hidx][1 bit valid][000]
+ */
+static inline bool __rpte_sub_valid(real_pte_t rpte, unsigned long index)
+{
+ unsigned char index_val = rpte.hidx[index];
+
+ if ((index_val >> 3) & 0x1)
+ return true;
+ return false;
+}
+
/*
* Trick: we set __end to va + 64k, which happens works for
* a 16M page as well as we want only one iteration
diff --git a/arch/powerpc/include/asm/book3s/64/hash.h b/arch/powerpc/include/asm/book3s/64/hash.h
index 25e38809e4f7..32a1f94201d0 100644
--- a/arch/powerpc/include/asm/book3s/64/hash.h
+++ b/arch/powerpc/include/asm/book3s/64/hash.h
@@ -214,11 +214,6 @@
#define PMD_BAD_BITS (PTE_TABLE_SIZE-1)
#define PUD_BAD_BITS (PMD_TABLE_SIZE-1)
-/*
- * We save the slot number & secondary bit in the second half of the
- * PTE page. We use the 8 bytes per each pte entry.
- */
-#define PTE_PAGE_HIDX_OFFSET (PTRS_PER_PTE * 8)
#ifndef __ASSEMBLY__
#define pmd_bad(pmd) (!is_kernel_addr(pmd_val(pmd)) \
diff --git a/arch/powerpc/include/asm/page.h b/arch/powerpc/include/asm/page.h
index ee82dcac5c27..b30673564a32 100644
--- a/arch/powerpc/include/asm/page.h
+++ b/arch/powerpc/include/asm/page.h
@@ -293,7 +293,7 @@ static inline pte_basic_t pte_val(pte_t x)
* the "second half" part of the PTE for pseudo 64k pages
*/
#if defined(CONFIG_PPC_64K_PAGES) && defined(CONFIG_PPC_STD_MMU_64)
-typedef struct { pte_t pte; unsigned long hidx; } real_pte_t;
+typedef struct { pte_t pte; unsigned char *hidx; } real_pte_t;
#else
typedef struct { pte_t pte; } real_pte_t;
#endif
@@ -345,7 +345,7 @@ static inline pte_basic_t pte_val(pte_t pte)
}
#if defined(CONFIG_PPC_64K_PAGES) && defined(CONFIG_PPC_STD_MMU_64)
-typedef struct { pte_t pte; unsigned long hidx; } real_pte_t;
+typedef struct { pte_t pte; unsigned char *hidx; } real_pte_t;
#else
typedef pte_t real_pte_t;
#endif
diff --git a/arch/powerpc/mm/hash64_64k.c b/arch/powerpc/mm/hash64_64k.c
index 0c2a4c1c482f..a21bf836ad95 100644
--- a/arch/powerpc/mm/hash64_64k.c
+++ b/arch/powerpc/mm/hash64_64k.c
@@ -16,12 +16,32 @@
#include <asm/machdep.h>
#include <asm/mmu.h>
+real_pte_t __real_pte(unsigned long addr, pte_t pte, pte_t *ptep)
+{
+ int indx;
+ real_pte_t rpte;
+ pte_t *pte_headp;
+
+ rpte.pte = pte;
+ rpte.hidx = NULL;
+ if (pte_val(pte) & _PAGE_COMBO) {
+ indx = pte_index(addr);
+ pte_headp = ptep - indx;
+ /*
+ * Make sure we order the hidx load against the _PAGE_COMBO
+ * check. The store side ordering is done in __hash_page_4K
+ */
+ smp_rmb();
+ rpte.hidx = (unsigned char *)(pte_headp + PTRS_PER_PTE) + (16 * indx);
+ }
+ return rpte;
+}
+
int __hash_page_4K(unsigned long ea, unsigned long access, unsigned long vsid,
pte_t *ptep, unsigned long trap, unsigned long flags,
int ssize, int subpg_prot)
{
real_pte_t rpte;
- unsigned long *hidxp;
unsigned long hpte_group;
unsigned int subpg_index;
unsigned long shift = 12; /* 4K */
@@ -92,7 +112,10 @@ int __hash_page_4K(unsigned long ea, unsigned long access, unsigned long vsid,
subpg_index = (ea & (PAGE_SIZE - 1)) >> shift;
vpn = hpt_vpn(ea, vsid, ssize);
- rpte = __real_pte(ea, old_pte, ptep);
+ if (!(old_pte & _PAGE_COMBO))
+ rpte = __real_pte(ea, old_pte | _PAGE_COMBO, ptep);
+ else
+ rpte = __real_pte(ea, old_pte, ptep);
/*
*None of the sub 4k page is hashed
*/
@@ -190,11 +213,8 @@ repeat:
* Since we have _PAGE_BUSY set on ptep, we can be sure
* nobody is undating hidx.
*/
- hidxp = (unsigned long *)(ptep + PTRS_PER_PTE);
- /* __real_pte use pte_val() any idea why ? FIXME!! */
- rpte.hidx &= ~(0xfUL << (subpg_index << 2));
- *hidxp = rpte.hidx | (slot << (subpg_index << 2));
- new_pte |= (_PAGE_HPTE_SUB0 >> subpg_index);
+ rpte.hidx[subpg_index] = (unsigned char)(slot << 4 | 0x1 << 3);
+ new_pte |= _PAGE_HPTE_SUB0;
/*
* check __real_pte for details on matching smp_rmb()
*/
--
2.5.0
More information about the Linuxppc-dev
mailing list