[PATCH v2] powerpc/85xx: Add support for Varisys Cyrus board

Scott Wood scottwood at freescale.com
Fri Sep 11 11:53:04 AEST 2015


On Thu, 2015-09-10 at 20:51 -0500, Andy Fleming wrote:
> ping? I'd love if this could go in for 4.3

It's way too late for 4.3.

-Scott

> 
> On Wed, Sep 2, 2015 at 1:07 PM, Andy Fleming <afleming at gmail.com> wrote:
> > This board uses a P5020 chip, and boots just fine using
> > the corenet_generic code. The device tree is very similar to the
> > P5020DS, except that there is no Flash memory. The environment is,
> > instead, stored on an MMC card on the motherboard.
> > 
> > Signed-off-by: Andy Fleming <afleming at gmail.com>
> > ---
> > v2: Moved dts to cyrus_p5020.dts so we can add a p5040 version later
> >     Corrected the model/compatible to varisys,CYRUS
> > 
> >  arch/powerpc/boot/dts/cyrus_p5020.dts         | 155 
> > ++++++++++++++++++++++++++
> >  arch/powerpc/platforms/85xx/corenet_generic.c |   1 +
> >  2 files changed, 156 insertions(+)
> >  create mode 100644 arch/powerpc/boot/dts/cyrus_p5020.dts
> > 
> > diff --git a/arch/powerpc/boot/dts/cyrus_p5020.dts 
> > b/arch/powerpc/boot/dts/cyrus_p5020.dts
> > new file mode 100644
> > index 0000000..493c6d6
> > --- /dev/null
> > +++ b/arch/powerpc/boot/dts/cyrus_p5020.dts
> > @@ -0,0 +1,155 @@
> > +/*
> > + * Cyrus 5020 Device Tree Source, based on p5020ds.dts
> > + *
> > + * Copyright 2015 Andy Fleming
> > + *
> > + * p5020ds.dts copyright:
> > + * Copyright 2010 - 2014 Freescale Semiconductor Inc.
> > + *
> > + * This program is free software; you can redistribute  it and/or modify 
> > it
> > + * under  the terms of  the GNU General  Public License as published by 
> > the
> > + * Free Software Foundation;  either version 2 of the  License, or (at 
> > your
> > + * option) any later version.
> > + */
> > +
> > +/include/ "fsl/p5020si-pre.dtsi"
> > +
> > +/ {
> > +       model = "varisys,CYRUS";
> > +       compatible = "varisys,CYRUS";
> > +       #address-cells = <2>;
> > +       #size-cells = <2>;
> > +       interrupt-parent = <&mpic>;
> > +
> > +       memory {
> > +               device_type = "memory";
> > +       };
> > +
> > +       reserved-memory {
> > +               #address-cells = <2>;
> > +               #size-cells = <2>;
> > +               ranges;
> > +
> > +               bman_fbpr: bman-fbpr {
> > +                       size = <0 0x1000000>;
> > +                       alignment = <0 0x1000000>;
> > +               };
> > +               qman_fqd: qman-fqd {
> > +                       size = <0 0x400000>;
> > +                       alignment = <0 0x400000>;
> > +               };
> > +               qman_pfdr: qman-pfdr {
> > +                       size = <0 0x2000000>;
> > +                       alignment = <0 0x2000000>;
> > +               };
> > +       };
> > +
> > +       dcsr:  dcsr at f00000000{
> > +               ranges = <0x00000000 0xf 0x00000000 0x01008000>;
> > +       };
> > +
> > +       bportals:  bman-portals at ff4000000{
> > +               ranges = <0x0 0xf 0xf4000000 0x200000>;
> > +       };
> > +
> > +       qportals:  qman-portals at ff4200000{
> > +               ranges = <0x0 0xf 0xf4200000 0x200000>;
> > +       };
> > +
> > +       soc:  soc at ffe000000{
> > +               ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
> > +               reg = <0xf 0xfe000000 0 0x00001000>;
> > +                spi at 110000{
> > +               };
> > +
> > +                i2c at 118100{
> > +               };
> > +
> > +                i2c at 119100{
> > +                        rtc at 6f{
> > +                               compatible = "microchip,mcp7941x";
> > +                               reg = <0x6f>;
> > +                       };
> > +               };
> > +       };
> > +
> > +       rio:  rapidio at ffe0c0000{
> > +               reg = <0xf 0xfe0c0000 0 0x11000>;
> > +
> > +               port1 {
> > +                       ranges = <0 0 0xc 0x20000000 0 0x10000000>;
> > +               };
> > +               port2 {
> > +                       ranges = <0 0 0xc 0x30000000 0 0x10000000>;
> > +               };
> > +       };
> > +
> > +       lbc:  localbus at ffe124000{
> > +               reg = <0xf 0xfe124000 0 0x1000>;
> > +               ranges = <0 0 0xf 0xe8000000 0x08000000
> > +                         2 0 0xf 0xffa00000 0x00040000
> > +                         3 0 0xf 0xffdf0000 0x00008000>;
> > +       };
> > +
> > +       pci0:  pcie at ffe200000{
> > +               reg = <0xf 0xfe200000 0 0x1000>;
> > +               ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 
> > 0x20000000
> > +                         0x01000000 0 0x00000000 0xf 0xf8000000 0x0 
> > 0x00010000>;
> > +                pcie at 0{
> > +                       ranges = <0x02000000 0 0xe0000000
> > +                                 0x02000000 0 0xe0000000
> > +                                 0 0x20000000
> > +
> > +                                 0x01000000 0 0x00000000
> > +                                 0x01000000 0 0x00000000
> > +                                 0 0x00010000>;
> > +               };
> > +       };
> > +
> > +       pci1:  pcie at ffe201000{
> > +               reg = <0xf 0xfe201000 0 0x1000>;
> > +               ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 
> > 0x20000000
> > +                         0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 
> > 0x00010000>;
> > +                pcie at 0{
> > +                       ranges = <0x02000000 0 0xe0000000
> > +                                 0x02000000 0 0xe0000000
> > +                                 0 0x20000000
> > +
> > +                                 0x01000000 0 0x00000000
> > +                                 0x01000000 0 0x00000000
> > +                                 0 0x00010000>;
> > +               };
> > +       };
> > +
> > +       pci2:  pcie at ffe202000{
> > +               reg = <0xf 0xfe202000 0 0x1000>;
> > +               ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 
> > 0x20000000
> > +                         0x01000000 0 0x00000000 0xf 0xf8020000 0 
> > 0x00010000>;
> > +                pcie at 0{
> > +                       ranges = <0x02000000 0 0xe0000000
> > +                                 0x02000000 0 0xe0000000
> > +                                 0 0x20000000
> > +
> > +                                 0x01000000 0 0x00000000
> > +                                 0x01000000 0 0x00000000
> > +                                 0 0x00010000>;
> > +               };
> > +       };
> > +
> > +       pci3:  pcie at ffe203000{
> > +               reg = <0xf 0xfe203000 0 0x1000>;
> > +               ranges = <0x02000000 0 0xe0000000 0xc 0x60000000 0 
> > 0x20000000
> > +                         0x01000000 0 0x00000000 0xf 0xf8030000 0 
> > 0x00010000>;
> > +                pcie at 0{
> > +                       ranges = <0x02000000 0 0xe0000000
> > +                                 0x02000000 0 0xe0000000
> > +                                 0 0x20000000
> > +
> > +                                 0x01000000 0 0x00000000
> > +                                 0x01000000 0 0x00000000
> > +                                 0 0x00010000>;
> > +               };
> > +       };
> > +};
> > +
> > +/include/ "fsl/p5020si-post.dtsi"
> > diff --git a/arch/powerpc/platforms/85xx/corenet_generic.c 
> > b/arch/powerpc/platforms/85xx/corenet_generic.c
> > index b395571..76e521e 100644
> > --- a/arch/powerpc/platforms/85xx/corenet_generic.c
> > +++ b/arch/powerpc/platforms/85xx/corenet_generic.c
> > @@ -161,6 +161,7 @@ static const char * const boards[] __initconst = {
> >         "fsl,T1042RDB",
> >         "fsl,T1042RDB_PI",
> >         "keymile,kmcoge4",
> > +       "varisys,CYRUS",
> >         NULL
> >  };
> > 
> > --
> > 1.9.1
> > 


More information about the Linuxppc-dev mailing list