[PATCH V7 5/6] powerpc/powernv: boundary the total VF BAR size instead of the individual one

Wei Yang weiyang at linux.vnet.ibm.com
Thu Oct 22 12:22:18 AEDT 2015


Each VF could have 6 BARs at most. When the total BAR size exceeds the
gate, after expanding it will also exhaust the M64 Window.

This patch limits the boundary by checking the total VF BAR size instead of
the individual BAR.

Signed-off-by: Wei Yang <weiyang at linux.vnet.ibm.com>
Reviewed-by: Gavin Shan <gwshan at linux.vnet.ibm.com>
Acked-by: Alexey Kardashevskiy <aik at ozlabs.ru>
---
 arch/powerpc/platforms/powernv/pci-ioda.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index 0add35f..1c11b1a 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -2701,7 +2701,7 @@ static void pnv_pci_ioda_fixup_iov_resources(struct pci_dev *pdev)
 	const resource_size_t gate = phb->ioda.m64_segsize >> 2;
 	struct resource *res;
 	int i;
-	resource_size_t size;
+	resource_size_t size, total_vf_bar_sz;
 	struct pci_dn *pdn;
 	int mul, total_vfs;
 
@@ -2714,6 +2714,7 @@ static void pnv_pci_ioda_fixup_iov_resources(struct pci_dev *pdev)
 
 	total_vfs = pci_sriov_get_totalvfs(pdev);
 	mul = phb->ioda.total_pe;
+	total_vf_bar_sz = 0;
 
 	for (i = 0; i < PCI_SRIOV_NUM_BARS; i++) {
 		res = &pdev->resource[i + PCI_IOV_RESOURCES];
@@ -2726,7 +2727,8 @@ static void pnv_pci_ioda_fixup_iov_resources(struct pci_dev *pdev)
 			goto truncate_iov;
 		}
 
-		size = pci_iov_resource_size(pdev, i + PCI_IOV_RESOURCES);
+		total_vf_bar_sz += pci_iov_resource_size(pdev,
+				i + PCI_IOV_RESOURCES);
 
 		/*
 		 * If bigger than quarter of M64 segment size, just round up
@@ -2740,11 +2742,11 @@ static void pnv_pci_ioda_fixup_iov_resources(struct pci_dev *pdev)
 		 * limit the system flexibility.  This is a design decision to
 		 * set the boundary to quarter of the M64 segment size.
 		 */
-		if (size > gate) {
-			dev_info(&pdev->dev, "PowerNV: VF BAR%d: %pR IOV size "
-				"is bigger than %lld, roundup power2\n",
-				 i, res, gate);
+		if (total_vf_bar_sz > gate) {
 			mul = roundup_pow_of_two(total_vfs);
+			dev_info(&pdev->dev,
+				"VF BAR Total IOV size %llx > %llx, roundup to %d VFs\n",
+				total_vf_bar_sz, gate, mul);
 			pdn->m64_single_mode = true;
 			break;
 		}
-- 
2.5.0



More information about the Linuxppc-dev mailing list