[PATCH v3 1/2] fsl: Add binding for RCPM
Wang Dongsheng
Dongsheng.Wang at freescale.com
Thu Oct 8 13:32:10 AEDT 2015
> > +++ b/Documentation/devicetree/bindings/soc/fsl/rcpm.txt
> > @@ -0,0 +1,63 @@
> > +* Run Control and Power Management
> > +-------------------------------------------
> > +The RCPM performs all device-level tasks associated with device run
> > +control and power management.
> > +
> > +Required properites:
> > + - reg : Offset and length of the register set of RCPM block.
>
> s/RCPM block/the RCPM block/
>
> > + - fsl,#rcpm-wakeup-cells : The number of cells in rcpm-wakeup property.
>
> s/rcpm-wakeup-property/the rcpm-wakeup-property/
>
> > + - compatible : Sould contain a chip-specific RCPM block compatible
> > + string
>
> s/Sould/Should
>
> "Should" means it is recommended, but does not mean "must". Is it really
> optional?
>
Thanks for your patient explain, change to "must".
Regards,
-Dongsheng
> > + and (if applicable) may contain a chassis-version RCPM compatible
> > + string. Chip-specific strings are of the form "fsl,<chip>-rcpm",
> > + such as:
> > + * "fsl,p2041-rcpm"
> > + * "fsl,p3041-rcpm"
> > + * "fsl,p4080-rcpm"
> > + * "fsl,p5020-rcpm"
> > + * "fsl,p5040-rcpm"
> > + * "fsl,t4240-rcpm"
> > + * "fsl,b4420-rcpm"
> > + * "fsl,b4860-rcpm"
>
> 2 or 3 examples is enough.
>
> > + Chassis-version strings are of the form "fsl,qoriq-rcpm-<version>",
> > + such as:
> > + * "fsl,qoriq-rcpm-1.0": for chassis 1.0 rcpm
> > + * "fsl,qoriq-rcpm-2.0": for chassis 2.0 rcpm
> > + * "fsl,qoriq-rcpm-2.1": for chassis 2.1 rcpm
> > +
> > +All references to "1.0" and "2.0" refer to the QorIQ chassis version
> > +to which the chip complies.
> > +Chassis Version Example Chips
> > +--------------- -------------------------------
> > +1.0 p4080, p5020, p5040, p2041, p3041
> > +2.0 t4240, b4860, b4420
> > +2.1 t1040, ls1021
>
> Not sure this binding is the place to maintain a table of chassis versions to
> SoCs.
>
> Thanks,
> Stuart
More information about the Linuxppc-dev
mailing list