[PATCH V3 1/3] ASoC: fsl_esai: spba clock is needed by esai device

Shengjiu Wang shengjiu.wang at freescale.com
Wed Nov 25 13:02:32 AEDT 2015


On Tue, Nov 24, 2015 at 05:21:30PM -0600, Rob Herring wrote:
> On Tue, Nov 24, 2015 at 03:03:28PM +0800, Shengjiu Wang wrote:
> > ESAI need to enable the spba clock, when sdma is using share peripheral
> > script. In this case, there is two spba master port is used, if don't
> > enable the clock, the spba bus will have arbitration issue, which may
> > cause read/write wrong data from/to ESAI registers.
> > 
> > Signed-off-by: Shengjiu Wang <shengjiu.wang at freescale.com>
> > ---
> >  Documentation/devicetree/bindings/sound/fsl,esai.txt |  5 +++++
> 
> Acked-by: Rob Herring <robh at kernel.org>

Hi Mark, Rob

   Just a reminder. There is V4 for this patch set. I think the "Acked-by:" is
for the V4. Thanks.

best regards
wang shengjiu

> 
> >  sound/soc/fsl/fsl_esai.c                             | 13 +++++++++++++
> >  2 files changed, 18 insertions(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/sound/fsl,esai.txt b/Documentation/devicetree/bindings/sound/fsl,esai.txt
> > index d3b6b5f..cd3ee5d 100644
> > --- a/Documentation/devicetree/bindings/sound/fsl,esai.txt
> > +++ b/Documentation/devicetree/bindings/sound/fsl,esai.txt
> > @@ -27,6 +27,11 @@ Required properties:
> >  			  derive HCK, SCK and FS.
> >  	"fsys"		  The system clock derived from ahb clock used to
> >  			  derive HCK, SCK and FS.
> > +	"spba"		  The spba clock is required when ESAI is placed as a
> > +			  bus slave of the Shared Peripheral Bus and when two
> > +			  or more bus masters (CPU, DMA or DSP) try to access
> > +			  it. This property is optional depending on the SoC
> > +			  design.
> >  
> >    - fsl,fifo-depth	: The number of elements in the transmit and receive
> >  			  FIFOs. This number is the maximum allowed value for
> > diff --git a/sound/soc/fsl/fsl_esai.c b/sound/soc/fsl/fsl_esai.c
> > index 504e731..4d7589c 100644
> > --- a/sound/soc/fsl/fsl_esai.c
> > +++ b/sound/soc/fsl/fsl_esai.c
> > @@ -35,6 +35,7 @@
> >   * @coreclk: clock source to access register
> >   * @extalclk: esai clock source to derive HCK, SCK and FS
> >   * @fsysclk: system clock source to derive HCK, SCK and FS
> > + * @spbaclk: SPBA clock (optional, depending on SoC design)
> >   * @fifo_depth: depth of tx/rx FIFO
> >   * @slot_width: width of each DAI slot
> >   * @slots: number of slots
> > @@ -54,6 +55,7 @@ struct fsl_esai {
> >  	struct clk *coreclk;
> >  	struct clk *extalclk;
> >  	struct clk *fsysclk;
> > +	struct clk *spbaclk;
> >  	u32 fifo_depth;
> >  	u32 slot_width;
> >  	u32 slots;
> > @@ -469,6 +471,9 @@ static int fsl_esai_startup(struct snd_pcm_substream *substream,
> >  	ret = clk_prepare_enable(esai_priv->coreclk);
> >  	if (ret)
> >  		return ret;
> > +	ret = clk_prepare_enable(esai_priv->spbaclk);
> > +	if (ret)
> > +		goto err_spbaclk;
> >  	if (!IS_ERR(esai_priv->extalclk)) {
> >  		ret = clk_prepare_enable(esai_priv->extalclk);
> >  		if (ret)
> > @@ -499,6 +504,8 @@ err_fsysclk:
> >  	if (!IS_ERR(esai_priv->extalclk))
> >  		clk_disable_unprepare(esai_priv->extalclk);
> >  err_extalck:
> > +	clk_disable_unprepare(esai_priv->spbaclk);
> > +err_spbaclk:
> >  	clk_disable_unprepare(esai_priv->coreclk);
> >  
> >  	return ret;
> > @@ -564,6 +571,7 @@ static void fsl_esai_shutdown(struct snd_pcm_substream *substream,
> >  		clk_disable_unprepare(esai_priv->fsysclk);
> >  	if (!IS_ERR(esai_priv->extalclk))
> >  		clk_disable_unprepare(esai_priv->extalclk);
> > +	clk_disable_unprepare(esai_priv->spbaclk);
> >  	clk_disable_unprepare(esai_priv->coreclk);
> >  }
> >  
> > @@ -819,6 +827,11 @@ static int fsl_esai_probe(struct platform_device *pdev)
> >  		dev_warn(&pdev->dev, "failed to get fsys clock: %ld\n",
> >  				PTR_ERR(esai_priv->fsysclk));
> >  
> > +	esai_priv->spbaclk = devm_clk_get(&pdev->dev, "spba");
> > +	if (IS_ERR(esai_priv->spbaclk))
> > +		dev_warn(&pdev->dev, "failed to get spba clock: %ld\n",
> > +				PTR_ERR(esai_priv->spbaclk));
> > +
> >  	irq = platform_get_irq(pdev, 0);
> >  	if (irq < 0) {
> >  		dev_err(&pdev->dev, "no irq for node %s\n", pdev->name);
> > -- 
> > 1.9.1
> > 


More information about the Linuxppc-dev mailing list