[PATCH] Enable MSI/MSI-X caps and disable MSI interrupts at PCI probe time - code move
Guilherme G. Piccoli
gpiccoli at linux.vnet.ibm.com
Wed Nov 25 08:05:56 AEDT 2015
On 10/21/2015 12:17 PM, Guilherme G. Piccoli wrote:
> Commit 1851617cd2da ("PCI/MSI: Disable MSI at enumeration even if kernel
> doesn't support MSI") changed the location of the code that initializes
> dev->msi_cap/msix_cap and disables MSI/MSI-X interrupts at PCI probe
> time in devices that have this flag set. It moved the code from
> pci_msi_init_pci_dev() to a new function named pci_msi_setup_pci_dev(),
> called by pci_setup_device().
>
> In Open Firmware code path (PowerPC pSeries/SPARC archs) the function
> pci_setup_device() is not called, so MSI capabilities are never enabled,
> leading to error messages as:
>
> bnx2x 0000:01:00.0: no msix capability found
>
> Commit 4d9aac397a5d ("powerpc/PCI: Disable MSI/MSI-X interrupts at PCI
> probe time in OF case") solved the issue on PowerPC pSeries arch calling
> manually pci_msi_setup_pci_dev() on appropriate place. However, this
> modification does not solve the general case (SPARC arch should be
> modified too) and duplicates a lot of code, as pointed by Bjorn Helgaas.
> As suggested by him, worth to reorganize the code to generally solve the
> MSI caps issue and avoid too much code duplication.
>
> This patch does exactly this: we remove both the pci_msi_setup_pci_dev()
> call from pci_setup_device() and the same call in OF code path of PowerPC
> pSeries arch. Then, we call pci_msi_setup_pci_dev() directly from
> pci_init_capabilities(). So, we can initialize MSI caps and disable MSI
> interruptions during PCI probe in general fashion, avoiding code
> duplication.
>
> Notice that this patch has the same practical effect of reverting
> commit 1851617cd2da ("PCI/MSI: Disable MSI at enumeration even if kernel
> doesn't support MSI") and commit 4d9aac397a5d ("powerpc/PCI: Disable
> MSI/MSI-X interrupts at PCI probe time in OF case"). Regarding the
> former, the author called pci_msi_setup_pci_dev() from pci_setup_device()
> because there was an early quirk used in pci_msi_off(), which depended on
> pci_msi_setup_pci_dev(). Since pci_msi_off() was completely removed by
> commit c6201cd8513d ("PCI/MSI: Remove unused pci_msi_off()"), we can call
> pci_msi_setup_pci_dev() directly from pci_init_capabilities().
>
> Signed-off-by: Guilherme G. Piccoli <gpiccoli at linux.vnet.ibm.com>
> ---
> arch/powerpc/kernel/pci_of_scan.c | 3 ---
> drivers/pci/probe.c | 5 +++--
> 2 files changed, 3 insertions(+), 5 deletions(-)
>
> diff --git a/arch/powerpc/kernel/pci_of_scan.c b/arch/powerpc/kernel/pci_of_scan.c
> index 2e710c1..526ac67 100644
> --- a/arch/powerpc/kernel/pci_of_scan.c
> +++ b/arch/powerpc/kernel/pci_of_scan.c
> @@ -187,9 +187,6 @@ struct pci_dev *of_create_pci_dev(struct device_node *node,
>
> pci_device_add(dev, bus);
>
> - /* Setup MSI caps & disable MSI/MSI-X interrupts */
> - pci_msi_setup_pci_dev(dev);
> -
> return dev;
> }
> EXPORT_SYMBOL(of_create_pci_dev);
> diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
> index 8361d27..0aac86e 100644
> --- a/drivers/pci/probe.c
> +++ b/drivers/pci/probe.c
> @@ -1209,8 +1209,6 @@ int pci_setup_device(struct pci_dev *dev)
> /* "Unknown power state" */
> dev->current_state = PCI_UNKNOWN;
>
> - pci_msi_setup_pci_dev(dev);
> -
> /* Early fixups, before probing the BARs */
> pci_fixup_device(pci_fixup_early, dev);
> /* device class may be changed after fixup */
> @@ -1600,6 +1598,9 @@ static void pci_init_capabilities(struct pci_dev *dev)
> /* MSI/MSI-X list */
> pci_msi_init_pci_dev(dev);
>
> + /* Setup MSI caps & disable MSI/MSI-X interrupts */
> + pci_msi_setup_pci_dev(dev);
> +
> /* Buffers for saving PCIe and PCI-X capabilities */
> pci_allocate_cap_save_buffers(dev);
>
Michael, Bjorn: any news on this one?
Thanks,
Guilherme
More information about the Linuxppc-dev
mailing list