[PATCH V4 1/5] dt-bindings: Add QorIQ TMU thermal bindings

Jia Hongtao hongtao.jia at freescale.com
Tue Nov 24 17:52:44 AEDT 2015


Add bindings documentation for TMU (Thermal Monitoring Unit) on QorIQ
platform.

Signed-off-by: Jia Hongtao <hongtao.jia at freescale.com>
Reviewed-by: Scott Wood <scottwood at freescale.com>
---
 .../devicetree/bindings/thermal/qoriq-thermal.txt  | 63 ++++++++++++++++++++++
 1 file changed, 63 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/thermal/qoriq-thermal.txt

diff --git a/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt b/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt
new file mode 100644
index 0000000..66223d5
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt
@@ -0,0 +1,63 @@
+* Thermal Monitoring Unit (TMU) on Freescale QorIQ SoCs
+
+Required properties:
+- compatible : Must include "fsl,qoriq-tmu". The version of the device is
+	determined by the TMU IP Block Revision Register (IPBRR0) at
+	offset 0x0BF8.
+	Table of correspondences between IPBRR0 values and example  chips:
+		Value           Device
+		----------      -----
+		0x01900102      T1040
+- reg : Address range of TMU registers.
+- interrupts : Contains the interrupt for TMU.
+- fsl,tmu-range : The values to be programmed into TTRnCR, as specified by
+	the SoC reference manual. The first cell is TTR0CR, the second is
+	TTR1CR, etc.
+- fsl,tmu-calibration : A list of cell pairs containing temperature
+	calibration data, as specified by the SoC reference manual.
+	The first cell of each pair is the value to be written to TTCFGR,
+	and the second is the value to be written to TSCFGR.
+
+Example:
+
+tmu at f0000 {
+	compatible = "fsl,qoriq-tmu";
+	reg = <0xf0000 0x1000>;
+	interrupts = <18 2 0 0>;
+	fsl,tmu-range = <0x000a0000 0x00090026 0x0008004a 0x0001006a>;
+	fsl,tmu-calibration = <0x00000000 0x00000025
+			       0x00000001 0x00000028
+			       0x00000002 0x0000002d
+			       0x00000003 0x00000031
+			       0x00000004 0x00000036
+			       0x00000005 0x0000003a
+			       0x00000006 0x00000040
+			       0x00000007 0x00000044
+			       0x00000008 0x0000004a
+			       0x00000009 0x0000004f
+			       0x0000000a 0x00000054
+
+			       0x00010000 0x0000000d
+			       0x00010001 0x00000013
+			       0x00010002 0x00000019
+			       0x00010003 0x0000001f
+			       0x00010004 0x00000025
+			       0x00010005 0x0000002d
+			       0x00010006 0x00000033
+			       0x00010007 0x00000043
+			       0x00010008 0x0000004b
+			       0x00010009 0x00000053
+
+			       0x00020000 0x00000010
+			       0x00020001 0x00000017
+			       0x00020002 0x0000001f
+			       0x00020003 0x00000029
+			       0x00020004 0x00000031
+			       0x00020005 0x0000003c
+			       0x00020006 0x00000042
+			       0x00020007 0x0000004d
+			       0x00020008 0x00000056
+
+			       0x00030000 0x00000012
+			       0x00030001 0x0000001d>;
+};
-- 
2.1.0.27.g96db324



More information about the Linuxppc-dev mailing list