[PATCH V4 2/2] powerpc/85xx: Add PCIe controller support for bsc9132qds

[Scott Wood]

On Mon, 2015-11-16 at 20:31 -0600, Hou Zhiqiang-B48286 wrote:
> Hi,
> 
> Any response, please comment.

They look OK.

-Scott

> 
> > -----Original Message-----
> > From: Zhiqiang Hou [mailto:Zhiqiang.Hou at freescale.com]
> > Sent: 2015年11月5日 11:16
> > To: linuxppc-dev at lists.ozlabs.org; Wood Scott-B07421;
> > galak at kernel.crashing.org; benh at kernel.crashing.org; paulus at samba.org;
> > mpe at ellerman.id.au; devicetree at vger.kernel.org; robh+dt at kernel.org;
> > pawel.moll at arm.com; mark.rutland at arm.com; ijc+devicetree at hellion.org.uk;
> > Rai Harninder-B01044
> > Cc: Lian Minghuan-B31939; Hu Mingkai-B21284; Hou Zhiqiang-B48286
> > Subject: [PATCH V4 2/2] powerpc/85xx: Add PCIe controller support for
> > bsc9132qds
> > 
> > From: Harninder Rai <harninder.rai at freescale.com>
> > 
> > 1. Use machine_arch_initcall to hook mpc85xx_common_publish_devices This
> > can ensure before pcibios_init() is called, pci controllers have been
> > probed and added to the hose_list.
> > 2. Add a workaround for errata A-005434
> > For the BSC9132, PEX_PEXIWARn[TRGT] for all windows defaults to 0xF,
> > which is mapped to CCSRBAR. However, for other products, 0xF is mapped to
> > the local memory. Therefore, for the BSC9132, any default PCI Express
> > access to the local memory (DDR) will now access the CCSRBAR. This patch
> > changes the mapping of targets of inbound windows PEX_PEXIWARn[TRGT] to
> > the Local address space – 0x0 (from 0xF).
> > 
> > Signed-off-by: Harninder Rai <harninder.rai at freescale.com>
> > Signed-off-by: Minghuan Lian <Minghuan.Lian at freescale.com>
> > Signed-off-by: Hou Zhiqiang <B48286 at freescale.com>
> > ---
> > V4: V3:
> >  - Remove gerrit stuff.
> > 
> >  arch/powerpc/platforms/85xx/bsc913x_qds.c |  8 +++++++-
> >  arch/powerpc/sysdev/fsl_pci.c             | 13 +++++++++++++
> >  2 files changed, 20 insertions(+), 1 deletion(-)
> > 
> > diff --git a/arch/powerpc/platforms/85xx/bsc913x_qds.c
> > b/arch/powerpc/platforms/85xx/bsc913x_qds.c
> > index f0927e5..dcfafd6 100644
> > --- a/arch/powerpc/platforms/85xx/bsc913x_qds.c
> > +++ b/arch/powerpc/platforms/85xx/bsc913x_qds.c
> > @@ -17,6 +17,7 @@
> >  #include <linux/pci.h>
> >  #include <asm/mpic.h>
> >  #include <sysdev/fsl_soc.h>
> > +#include <sysdev/fsl_pci.h>
> >  #include <asm/udbg.h>
> > 
> >  #include "mpc85xx.h"
> > @@ -46,10 +47,12 @@ static void __init bsc913x_qds_setup_arch(void)
> >  	mpc85xx_smp_init();
> >  #endif
> > 
> > +	fsl_pci_assign_primary();
> > +
> >  	pr_info("bsc913x board from Freescale Semiconductor\n");  }
> > 
> > -machine_device_initcall(bsc9132_qds, mpc85xx_common_publish_devices);
> > +machine_arch_initcall(bsc9132_qds, mpc85xx_common_publish_devices);
> > 
> >  /*
> >   * Called very early, device-tree isn't unflattened @@ -67,6 +70,9 @@
> > define_machine(bsc9132_qds) {
> >  	.probe			= bsc9132_qds_probe,
> >  	.setup_arch		= bsc913x_qds_setup_arch,
> >  	.init_IRQ		= bsc913x_qds_pic_init,
> > +#ifdef CONFIG_PCI
> > +	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
> > +#endif
> >  	.get_irq		= mpic_get_irq,
> >  	.restart		= fsl_rstcr_restart,
> >  	.calibrate_decr		= generic_calibrate_decr,
> > diff --git a/arch/powerpc/sysdev/fsl_pci.c
> > b/arch/powerpc/sysdev/fsl_pci.c index ebc1f412..b8607f6 100644
> > --- a/arch/powerpc/sysdev/fsl_pci.c
> > +++ b/arch/powerpc/sysdev/fsl_pci.c
> > @@ -193,6 +193,19 @@ static void setup_pci_atmu(struct pci_controller
> > *hose)
> >  	const u64 *reg;
> >  	int len;
> > 
> > +	if (of_device_is_compatible(hose->dn, "fsl,bsc9132-pcie")) {
> > +		/*
> > +		 * BSC9132 Rev1.0 has an issue where all the PEX inbound
> > +		 * windows have implemented the default target value as
> > 0xf
> > +		 * for CCSR space.In all Freescale legacy devices the
> > target
> > +		 * of 0xf is reserved for local memory space. 9132 Rev1.0
> > +		 * now has local mempry space mapped to target 0x0
> > instead of
> > +		 * 0xf. Hence adding a workaround to remove the target
> > 0xf
> > +		 * defined for memory space from Inbound window
> > attributes.
> > +		 */
> > +		piwar &= ~PIWAR_TGI_LOCAL;
> > +	}
> > +
> >  	if (early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) {
> >  		if (in_be32(&pci->block_rev1) >= PCIE_IP_REV_2_2) {
> >  			win_idx = 2;
> > --
> > 2.1.0.27.g96db324
> 
> Thanks,
> Zhiqiang