[PATCH 1/2] mpc85xx/lbc: modify suspend/resume entry sequence
Dogra Raghav
raghav at freescale.com
Mon Nov 2 17:12:39 AEDT 2015
-----Original Message-----
From: Raghav Dogra [mailto:raghav at freescale.com]
Sent: Friday, October 30, 2015 11:55 AM
To: linuxppc-dev at lists.ozlabs.org
Cc: Wood Scott-B07421 <scottwood at freescale.com>; Kushwaha Prabhakar-B32579 <prabhakar at freescale.com>; Dogra Raghav-B46184 <raghav at freescale.com>
Subject: [PATCH 1/2] mpc85xx/lbc: modify suspend/resume entry sequence
Modify platform driver suspend/resume to syscore suspend/resume. This is because p1022ds needs to use localbus when entering the PCIE resume.
Signed-off-by: Raghav Dogra <raghav at freescale.com>
---
arch/powerpc/sysdev/Makefile | 2 +-
arch/powerpc/sysdev/fsl_lbc.c | 51 +++++++++++++++++++++++++++++++++----------
2 files changed, 40 insertions(+), 13 deletions(-)
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile index f7cb2a1..4c19e614 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -18,9 +18,9 @@ obj-$(CONFIG_PPC_PMI) += pmi.o
obj-$(CONFIG_U3_DART) += dart_iommu.o
obj-$(CONFIG_MMIO_NVRAM) += mmio_nvram.o
obj-$(CONFIG_FSL_SOC) += fsl_soc.o fsl_mpic_err.o
+obj-$(CONFIG_FSL_LBC) += fsl_lbc.o
obj-$(CONFIG_FSL_PCI) += fsl_pci.o $(fsl-msi-obj-y)
obj-$(CONFIG_FSL_PMC) += fsl_pmc.o
-obj-$(CONFIG_FSL_LBC) += fsl_lbc.o
obj-$(CONFIG_FSL_GTM) += fsl_gtm.o
obj-$(CONFIG_FSL_85XX_CACHE_SRAM) += fsl_85xx_l2ctlr.o fsl_85xx_cache_sram.o
obj-$(CONFIG_SIMPLE_GPIO) += simple_gpio.o
diff --git a/arch/powerpc/sysdev/fsl_lbc.c b/arch/powerpc/sysdev/fsl_lbc.c index d631022..332d700 100644
--- a/arch/powerpc/sysdev/fsl_lbc.c
+++ b/arch/powerpc/sysdev/fsl_lbc.c
@@ -27,6 +27,7 @@
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/mod_devicetable.h>
+#include <linux/syscore_ops.h>
#include <asm/prom.h>
#include <asm/fsl_lbc.h>
@@ -354,24 +355,42 @@ err:
#ifdef CONFIG_SUSPEND
/* save lbc registers */
-static int fsl_lbc_suspend(struct platform_device *pdev, pm_message_t state)
+static int fsl_lbc_syscore_suspend(void)
{
- struct fsl_lbc_ctrl *ctrl = dev_get_drvdata(&pdev->dev);
- struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
+ struct fsl_lbc_ctrl *ctrl;
+ struct fsl_lbc_regs __iomem *lbc;
+
+ ctrl = fsl_lbc_ctrl_dev;
+ if (!ctrl)
+ goto out;
+
+ lbc = ctrl->regs;
+ if (!lbc)
+ goto out;
ctrl->saved_regs = kmalloc(sizeof(struct fsl_lbc_regs), GFP_KERNEL);
if (!ctrl->saved_regs)
return -ENOMEM;
[Dogra Raghav-B46184] This is the existing upstream code. Are you suggesting to modify the upstream code to take care of individual registers?
_memcpy_fromio(ctrl->saved_regs, lbc, sizeof(struct fsl_lbc_regs));
+
+out:
return 0;
}
/* restore lbc registers */
-static int fsl_lbc_resume(struct platform_device *pdev)
+static int fsl_lbc_syscore_resume(void)
{
- struct fsl_lbc_ctrl *ctrl = dev_get_drvdata(&pdev->dev);
- struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
+ struct fsl_lbc_ctrl *ctrl;
+ struct fsl_lbc_regs __iomem *lbc;
+
+ ctrl = fsl_lbc_ctrl_dev;
+ if (!ctrl)
+ goto out;
+
+ lbc = ctrl->regs;
+ if (!lbc)
+ goto out;
if (ctrl->saved_regs) {
_memcpy_toio(lbc, ctrl->saved_regs,
@@ -379,7 +398,9 @@ static int fsl_lbc_resume(struct platform_device *pdev)
kfree(ctrl->saved_regs);
ctrl->saved_regs = NULL;
}
- return 0;
+
+out:
+ return;
}
#endif /* CONFIG_SUSPEND */
@@ -391,20 +412,26 @@ static const struct of_device_id fsl_lbc_match[] = {
{},
};
+#ifdef CONFIG_SUSPEND
+static struct syscore_ops lbc_syscore_pm_ops = {
+ .suspend = fsl_lbc_syscore_suspend,
+ .resume = fsl_lbc_syscore_resume,
+};
+#endif
+
static struct platform_driver fsl_lbc_ctrl_driver = {
.driver = {
.name = "fsl-lbc",
.of_match_table = fsl_lbc_match,
},
.probe = fsl_lbc_ctrl_probe,
-#ifdef CONFIG_SUSPEND
- .suspend = fsl_lbc_suspend,
- .resume = fsl_lbc_resume,
-#endif
};
static int __init fsl_lbc_init(void)
{
+#ifdef CONFIG_SUSPEND
+ register_syscore_ops(&lbc_syscore_pm_ops);
+#endif
return platform_driver_register(&fsl_lbc_ctrl_driver);
}
-module_init(fsl_lbc_init);
+arch_initcall(fsl_lbc_init);
--
1.9.1
More information about the Linuxppc-dev
mailing list