[PATCH V2] drivers/mtd: add powernv flash MTD abstraction driver
Cyril Bur
cyrilbur at gmail.com
Thu May 28 23:06:48 AEST 2015
Powerpc powernv platforms allow access to certain system flash devices
through a firmwarwe interface. This change adds an mtd driver for these
flash devices.
Minor updates from Jeremy Kerr and Joel Stanley.
Signed-off-by: Cyril Bur <cyrilbur at gmail.com>
Signed-off-by: Joel Stanley <joel at jms.id.au>
Signed-off-by: Jeremy Kerr <jk at ozlabs.org>
---
V2: Address Brian Norris' review
Fix typos
Change from NAND flash type to NOR flash type
Correctness tweaks
---
drivers/mtd/devices/Kconfig | 8 +
drivers/mtd/devices/Makefile | 1 +
drivers/mtd/devices/powernv_flash.c | 286 ++++++++++++++++++++++++++++++++++++
3 files changed, 295 insertions(+)
create mode 100644 drivers/mtd/devices/powernv_flash.c
diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig
index c49d0b1..a8cc237 100644
--- a/drivers/mtd/devices/Kconfig
+++ b/drivers/mtd/devices/Kconfig
@@ -195,6 +195,14 @@ config MTD_BLOCK2MTD
Testing MTD users (eg JFFS2) on large media and media that might
be removed during a write (using the floppy drive).
+config MTD_POWERNV_FLASH
+ tristate "powernv flash MTD driver"
+ depends on PPC_POWERNV
+ help
+ This provides an MTD device to access NVRAM on powernv OPAL
+ platforms from Linux. This device abstracts away the
+ firmware interface for NVRAM access.
+
comment "Disk-On-Chip Device Drivers"
config MTD_DOCG3
diff --git a/drivers/mtd/devices/Makefile b/drivers/mtd/devices/Makefile
index f0b0e61..7912d3a 100644
--- a/drivers/mtd/devices/Makefile
+++ b/drivers/mtd/devices/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_MTD_SPEAR_SMI) += spear_smi.o
obj-$(CONFIG_MTD_SST25L) += sst25l.o
obj-$(CONFIG_MTD_BCM47XXSFLASH) += bcm47xxsflash.o
obj-$(CONFIG_MTD_ST_SPI_FSM) += st_spi_fsm.o
+obj-$(CONFIG_MTD_POWERNV_FLASH) += powernv_flash.o
CFLAGS_docg3.o += -I$(src)
diff --git a/drivers/mtd/devices/powernv_flash.c b/drivers/mtd/devices/powernv_flash.c
new file mode 100644
index 0000000..f619e4a
--- /dev/null
+++ b/drivers/mtd/devices/powernv_flash.c
@@ -0,0 +1,286 @@
+/*
+ * OPAL PNOR flash MTD abstraction
+ *
+ * IBM 2015
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+
+#include <asm/opal.h>
+
+
+/*
+ * This driver creates the a Linux MTD abstraction for platform PNOR flash
+ * backed by OPAL calls
+ */
+
+struct powernv_flash {
+ struct mtd_info mtd;
+ uint64_t id;
+};
+
+enum flash_op {
+ FLASH_OP_READ,
+ FLASH_OP_WRITE,
+ FLASH_OP_ERASE,
+};
+
+static int powernv_flash_async_op(struct mtd_info *mtd, enum flash_op op,
+ loff_t offset, size_t len, size_t *retlen, u_char *buf)
+{
+ struct powernv_flash *info = (struct powernv_flash *)mtd->priv;
+ struct device *dev = &mtd->dev;
+ int token;
+ struct opal_msg msg;
+ int rc;
+
+ dev_dbg(dev, "%s(op=%d, offset=0x%llx, len=%zu)\n",
+ __func__, op, offset, len);
+
+ token = opal_async_get_token_interruptible();
+ if (token < 0) {
+ dev_err(dev, "Failed to get an async token\n");
+ return -ENOMEM;
+ }
+
+ switch (op) {
+ case FLASH_OP_READ:
+ rc = opal_flash_read(info->id, offset, __pa(buf), len, token);
+ break;
+ case FLASH_OP_WRITE:
+ rc = opal_flash_write(info->id, offset, __pa(buf), len, token);
+ break;
+ case FLASH_OP_ERASE:
+ rc = opal_flash_erase(info->id, offset, len, token);
+ break;
+ default:
+ BUG_ON(1);
+ }
+
+ if (rc != OPAL_ASYNC_COMPLETION) {
+ dev_err(dev, "opal_flash_async_op(op=%d) failed (rc %d)\n",
+ op, rc);
+ return -EIO;
+ }
+
+ rc = opal_async_wait_response(token, &msg);
+ opal_async_release_token(token);
+ if (rc) {
+ dev_err(dev, "opal async wait failed (rc %d)\n", rc);
+ return -EIO;
+ }
+
+ rc = be64_to_cpu(msg.params[1]);
+ if (rc == OPAL_SUCCESS) {
+ rc = 0;
+ if (retlen)
+ *retlen = len;
+ } else {
+ rc = -EIO;
+ }
+
+ return 0;
+}
+
+/**
+ * @mtd: the device
+ * @from: the offset to read from
+ * @len: the number of bytes to read
+ * @retlen: the number of bytes actually read
+ * @buf: the filled in buffer
+ *
+ * Returns 0 if read successful, or -ERRNO if an error occurred
+ */
+static int powernv_flash_read(struct mtd_info *mtd, loff_t from, size_t len,
+ size_t *retlen, u_char *buf)
+{
+ return powernv_flash_async_op(mtd, FLASH_OP_READ, from,
+ len, retlen, buf);
+}
+
+/**
+ * @mtd: the device
+ * @to: the offset to write to
+ * @len: the number of bytes to write
+ * @retlen: the number of bytes actually written
+ * @buf: the buffer to get bytes from
+ *
+ * Returns 0 if write successful, -ERRNO if error occurred
+ */
+static int powernv_flash_write(struct mtd_info *mtd, loff_t to, size_t len,
+ size_t *retlen, const u_char *buf)
+{
+ return powernv_flash_async_op(mtd, FLASH_OP_WRITE, to,
+ len, retlen, (u_char *)buf);
+}
+
+/**
+ * @mtd: the device
+ * @erase: the erase info
+ * Returns 0 if erase successful or -ERRNO if an error occurred
+ */
+static int powernv_flash_erase(struct mtd_info *mtd, struct erase_info *erase)
+{
+ int rc;
+
+ erase->state = MTD_ERASING;
+
+ /* todo: register our own notifier to do a true async implementation */
+ rc = powernv_flash_async_op(mtd, FLASH_OP_ERASE, erase->addr,
+ erase->len, NULL, NULL);
+
+ if (rc) {
+ erase->fail_addr = erase->addr;
+ erase->state = MTD_ERASE_FAILED;
+ } else {
+ erase->state = MTD_ERASE_DONE;
+ }
+ mtd_erase_callback(erase);
+ return 0;
+}
+
+/**
+ * powernv_flash_set_driver_info - Fill the mtd_info structure and docg3
+ * structure @pdev: The platform device
+ * @mtd: The structure to fill
+ */
+static int __init powernv_flash_set_driver_info(struct device *dev,
+ struct mtd_info *mtd)
+{
+ u64 size;
+ u32 erase_size;
+ int rc;
+
+ rc = of_property_read_u32(dev->of_node, "ibm,flash-block-size",
+ &erase_size);
+ if (rc) {
+ dev_err(dev, "couldn't get resource block size information\n");
+ return rc;
+ }
+
+ rc = of_property_read_u64(dev->of_node, "reg", &size);
+ if (rc) {
+ dev_err(dev, "couldn't get resource size information\n");
+ return rc;
+ }
+
+ /*
+ * Going to have to check what details I need to set and how to
+ * get them
+ */
+ mtd->name = of_get_property(dev->of_node, "name", NULL);
+ /*
+ * Using MTD_ABSENT as this is really just a passthrough to a firmware
+ * interface
+ */
+ mtd->type = MTD_NORFLASH;
+ mtd->flags = MTD_WRITEABLE;
+ mtd->size = size;
+ mtd->erasesize = erase_size;
+ mtd->writebufsize = mtd->writesize = 1;
+ mtd->owner = THIS_MODULE;
+ mtd->_erase = powernv_flash_erase;
+ mtd->_read = powernv_flash_read;
+ mtd->_write = powernv_flash_write;
+ mtd->dev.parent = dev;
+ return 0;
+}
+
+/**
+ * powernv_flash_probe
+ * @pdev: platform device
+ *
+ * Returns 0 on success, -ENOMEM, -ENXIO on error
+ */
+static int powernv_flash_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct powernv_flash *data;
+ int ret;
+
+ data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+ if (!data) {
+ ret = -ENOMEM;
+ goto out;
+ }
+ data->mtd.priv = data;
+
+ ret = of_property_read_u32(dev->of_node, "ibm,opal-id", &(data->id));
+ if (ret) {
+ dev_err(dev, "no device property 'ibm,opal-id'\n");
+ goto out;
+ }
+
+ ret = powernv_flash_set_driver_info(dev, &data->mtd);
+ if (ret)
+ goto out;
+
+ /*
+ * Skiboot does expose the partitioning information via OF and the
+ * ofpart parser could partition it all nicely.
+ *
+ * The current flash that skiboot exposes is one contiguous flash chip
+ * with an ffs partition at the start, it should prove easier for users
+ * to deal with partitions or not as they see fit
+ */
+ ret = mtd_device_register(&data->mtd, NULL, 0);
+
+out:
+ return ret;
+}
+
+/**
+ * op_release - Release the driver
+ * @pdev: the platform device
+ *
+ * Returns 0
+ */
+static int powernv_flash_release(struct platform_device *pdev)
+{
+ /* All resources should be freed automatically */
+ return 0;
+}
+
+static const struct of_device_id powernv_flash_match[] = {
+ { .compatible = "ibm,opal-flash" },
+ {}
+};
+
+static struct platform_driver powernv_flash_driver = {
+ .driver = {
+ .name = "powernv_flash",
+ .of_match_table = powernv_flash_match,
+ },
+ .remove = powernv_flash_release,
+ .probe = powernv_flash_probe,
+};
+
+module_platform_driver(powernv_flash_driver);
+
+MODULE_DEVICE_TABLE(of, powernv_flash_match);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Cyril Bur <cyril.bur at au1.ibm.com>");
+MODULE_DESCRIPTION("MTD abstraction for OPAL flash");
--
1.9.1
More information about the Linuxppc-dev
mailing list