[PATCH] powerpc/fsl: Add FMan Port 10G compatibles

Igal.Liberman igal.liberman at freescale.com
Mon May 25 23:30:46 AEST 2015

From: Igal Liberman <igal.liberman at freescale.com>

This patch adds two boolean properties to FMan Port.
FMan has 3 types of ports:
	- 1G ports
		By default, all ports support 1G rate
	- 10G Ports
		Port which use 10G hardware, and configured as 10G
	- 10G Best effort ports
		Ports which use 1G hardware, configured as 10G, in this case,
		the rate is not guaranteed.
The new properties help to distinguish the different type of ports.

Signed-off-by: Igal Liberman <igal.liberman at freescale.com>

 .../devicetree/bindings/powerpc/fsl/fman.txt       |   13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/Documentation/devicetree/bindings/powerpc/fsl/fman.txt b/Documentation/devicetree/bindings/powerpc/fsl/fman.txt
index edda55f..76a7cba 100644
--- a/Documentation/devicetree/bindings/powerpc/fsl/fman.txt
+++ b/Documentation/devicetree/bindings/powerpc/fsl/fman.txt
@@ -189,6 +189,19 @@ PROPERTIES
 		Definition: There is one reg region describing the port
 		configuration registers.
+- 10G-support
+		Usage: optional
+		Value type: boolean
+		Definition: The default port rate is 1G.
+		If this property exists, the port is configured as 10G port.
+- best-effort-port
+		Usage: optional
+		Value type: boolean
+		Definition: Can be defined only if 10G-support is set.
+		This property marks a best-effort 10G port (1G hardware
+		configured as 10G, 10G rate is not guaranteed).
 port at a8000 {

More information about the Linuxppc-dev mailing list