[PATCH V6 09/10] powerpc/eeh: Support error recovery for VF PE
Wei Yang
weiyang at linux.vnet.ibm.com
Tue May 19 11:35:11 AEST 2015
Different from PCI bus dependent PE, PE for VFs doesn't have the
primary bus, on which the PCI hotplug is implemented. The patch
supports error recovery, especially the PCI hotplug for VF's PE.
The hotplug on VF's PE is implemented based on VFs, instead of
PCI bus any more.
[gwshan: changelog and code refactoring]
Signed-off-by: Wei Yang <weiyang at linux.vnet.ibm.com>
Acked-by: Gavin Shan <gwshan at linux.vnet.ibm.com>
---
arch/powerpc/include/asm/eeh.h | 1 +
arch/powerpc/kernel/eeh.c | 8 +++
arch/powerpc/kernel/eeh_driver.c | 100 ++++++++++++++++++++++++++++++--------
arch/powerpc/kernel/eeh_pe.c | 3 +-
4 files changed, 90 insertions(+), 22 deletions(-)
diff --git a/arch/powerpc/include/asm/eeh.h b/arch/powerpc/include/asm/eeh.h
index 3d64cf3..d24382c 100644
--- a/arch/powerpc/include/asm/eeh.h
+++ b/arch/powerpc/include/asm/eeh.h
@@ -140,6 +140,7 @@ struct eeh_dev {
struct pci_controller *phb; /* Associated PHB */
struct pci_dn *pdn; /* Associated PCI device node */
struct pci_dev *pdev; /* Associated PCI device */
+ int in_error; /* Error flag for eeh_dev */
struct pci_dev *physfn; /* Associated PF PORT */
struct pci_bus *bus; /* PCI bus for partial hotplug */
};
diff --git a/arch/powerpc/kernel/eeh.c b/arch/powerpc/kernel/eeh.c
index 9ee61d1..1207547 100644
--- a/arch/powerpc/kernel/eeh.c
+++ b/arch/powerpc/kernel/eeh.c
@@ -1229,6 +1229,14 @@ void eeh_remove_device(struct pci_dev *dev)
* from the parent PE during the BAR resotre.
*/
edev->pdev = NULL;
+
+ /*
+ * The flag "in_error" is used to trace EEH devices for VFs
+ * in error state or not. It's set in eeh_report_error(). If
+ * it's not set, eeh_report_{reset,resume}() won't be called
+ * for the VF EEH device.
+ */
+ edev->in_error = 0;
dev->dev.archdata.edev = NULL;
if (!(edev->pe->state & EEH_PE_KEEP))
eeh_rmv_from_parent_pe(edev);
diff --git a/arch/powerpc/kernel/eeh_driver.c b/arch/powerpc/kernel/eeh_driver.c
index 24768ff..63a2c33 100644
--- a/arch/powerpc/kernel/eeh_driver.c
+++ b/arch/powerpc/kernel/eeh_driver.c
@@ -211,6 +211,7 @@ static void *eeh_report_error(void *data, void *userdata)
if (rc == PCI_ERS_RESULT_NEED_RESET) *res = rc;
if (*res == PCI_ERS_RESULT_NONE) *res = rc;
+ edev->in_error = 1;
eeh_pcid_put(dev);
return NULL;
}
@@ -282,7 +283,8 @@ static void *eeh_report_reset(void *data, void *userdata)
if (!driver->err_handler ||
!driver->err_handler->slot_reset ||
- (edev->mode & EEH_DEV_NO_HANDLER)) {
+ (edev->mode & EEH_DEV_NO_HANDLER) ||
+ (!edev->in_error)) {
eeh_pcid_put(dev);
return NULL;
}
@@ -339,14 +341,16 @@ static void *eeh_report_resume(void *data, void *userdata)
if (!driver->err_handler ||
!driver->err_handler->resume ||
- (edev->mode & EEH_DEV_NO_HANDLER)) {
+ (edev->mode & EEH_DEV_NO_HANDLER) ||
+ (!edev->in_error)) {
edev->mode &= ~EEH_DEV_NO_HANDLER;
- eeh_pcid_put(dev);
- return NULL;
+ goto out;
}
driver->err_handler->resume(dev);
+out:
+ edev->in_error = 0;
eeh_pcid_put(dev);
return NULL;
}
@@ -386,12 +390,38 @@ static void *eeh_report_failure(void *data, void *userdata)
return NULL;
}
+static void *eeh_add_virt_device(void *data, void *userdata)
+{
+ struct pci_driver *driver;
+ struct eeh_dev *edev = (struct eeh_dev *)data;
+ struct pci_dev *dev = eeh_dev_to_pci_dev(edev);
+ struct pci_dn *pdn = eeh_dev_to_pdn(edev);
+
+ if (!(edev->physfn)) {
+ pr_warn("%s: EEH dev %04x:%02x:%02x.%01x not for VF\n",
+ __func__, edev->phb->global_number, pdn->busno,
+ PCI_SLOT(pdn->devfn), PCI_FUNC(pdn->devfn));
+ return NULL;
+ }
+
+ driver = eeh_pcid_get(dev);
+ if (driver) {
+ eeh_pcid_put(dev);
+ if (driver->err_handler)
+ return NULL;
+ }
+
+ pci_iov_virtfn_add(edev->physfn, pdn->vf_index, 0);
+ return NULL;
+}
+
static void *eeh_rmv_device(void *data, void *userdata)
{
struct pci_driver *driver;
struct eeh_dev *edev = (struct eeh_dev *)data;
struct pci_dev *dev = eeh_dev_to_pci_dev(edev);
int *removed = (int *)userdata;
+ struct pci_dn *pdn = eeh_dev_to_pdn(edev);
/*
* Actually, we should remove the PCI bridges as well.
@@ -416,7 +446,7 @@ static void *eeh_rmv_device(void *data, void *userdata)
driver = eeh_pcid_get(dev);
if (driver) {
eeh_pcid_put(dev);
- if (driver->err_handler)
+ if (removed && driver->err_handler)
return NULL;
}
@@ -425,11 +455,23 @@ static void *eeh_rmv_device(void *data, void *userdata)
pci_name(dev));
edev->bus = dev->bus;
edev->mode |= EEH_DEV_DISCONNECTED;
- (*removed)++;
+ if (removed)
+ (*removed)++;
- pci_lock_rescan_remove();
- pci_stop_and_remove_bus_device(dev);
- pci_unlock_rescan_remove();
+ if (edev->physfn) {
+ pci_iov_virtfn_remove(edev->physfn, pdn->vf_index, 0);
+ edev->pdev = NULL;
+
+ /*
+ * We have to set the VF PE number to invalid one, which is
+ * required to plug the VF successfully.
+ */
+ pdn->pe_number = IODA_INVALID_PE;
+ } else {
+ pci_lock_rescan_remove();
+ pci_stop_and_remove_bus_device(dev);
+ pci_unlock_rescan_remove();
+ }
return NULL;
}
@@ -548,6 +590,7 @@ static int eeh_reset_device(struct eeh_pe *pe, struct pci_bus *bus)
struct pci_bus *frozen_bus = eeh_pe_bus_get(pe);
struct timeval tstamp;
int cnt, rc, removed = 0;
+ struct eeh_dev *edev;
/* pcibios will clear the counter; save the value */
cnt = pe->freeze_count;
@@ -561,12 +604,15 @@ static int eeh_reset_device(struct eeh_pe *pe, struct pci_bus *bus)
*/
eeh_pe_state_mark(pe, EEH_PE_KEEP);
if (bus) {
- pci_lock_rescan_remove();
- pcibios_remove_pci_devices(bus);
- pci_unlock_rescan_remove();
- } else if (frozen_bus) {
+ if (pe->type & EEH_PE_VF)
+ eeh_pe_dev_traverse(pe, eeh_rmv_device, NULL);
+ else {
+ pci_lock_rescan_remove();
+ pcibios_remove_pci_devices(bus);
+ pci_unlock_rescan_remove();
+ }
+ } else if (frozen_bus)
eeh_pe_dev_traverse(pe, eeh_rmv_device, &removed);
- }
/*
* Reset the pci controller. (Asserts RST#; resets config space).
@@ -607,14 +653,22 @@ static int eeh_reset_device(struct eeh_pe *pe, struct pci_bus *bus)
* PE. We should disconnect it so the binding can be
* rebuilt when adding PCI devices.
*/
+ edev = list_first_entry(&pe->edevs, struct eeh_dev, list);
eeh_pe_traverse(pe, eeh_pe_detach_dev, NULL);
- pcibios_add_pci_devices(bus);
+ if (pe->type & EEH_PE_VF)
+ eeh_add_virt_device(edev, NULL);
+ else
+ pcibios_add_pci_devices(bus);
} else if (frozen_bus && removed) {
pr_info("EEH: Sleep 5s ahead of partial hotplug\n");
ssleep(5);
+ edev = list_first_entry(&pe->edevs, struct eeh_dev, list);
eeh_pe_traverse(pe, eeh_pe_detach_dev, NULL);
- pcibios_add_pci_devices(frozen_bus);
+ if (pe->type & EEH_PE_VF)
+ eeh_add_virt_device(edev, NULL);
+ else
+ pcibios_add_pci_devices(frozen_bus);
}
eeh_pe_state_clear(pe, EEH_PE_KEEP);
@@ -792,11 +846,15 @@ perm_error:
* the their PCI config any more.
*/
if (frozen_bus) {
- eeh_pe_dev_mode_mark(pe, EEH_DEV_REMOVED);
-
- pci_lock_rescan_remove();
- pcibios_remove_pci_devices(frozen_bus);
- pci_unlock_rescan_remove();
+ if (pe->type & EEH_PE_VF) {
+ eeh_pe_dev_traverse(pe, eeh_rmv_device, NULL);
+ eeh_pe_dev_mode_mark(pe, EEH_DEV_REMOVED);
+ } else {
+ eeh_pe_dev_mode_mark(pe, EEH_DEV_REMOVED);
+ pci_lock_rescan_remove();
+ pcibios_remove_pci_devices(frozen_bus);
+ pci_unlock_rescan_remove();
+ }
}
}
diff --git a/arch/powerpc/kernel/eeh_pe.c b/arch/powerpc/kernel/eeh_pe.c
index 260a701..5cde950 100644
--- a/arch/powerpc/kernel/eeh_pe.c
+++ b/arch/powerpc/kernel/eeh_pe.c
@@ -914,7 +914,8 @@ struct pci_bus *eeh_pe_bus_get(struct eeh_pe *pe)
if (pe->type & EEH_PE_PHB) {
bus = pe->phb->bus;
} else if (pe->type & EEH_PE_BUS ||
- pe->type & EEH_PE_DEVICE) {
+ pe->type & EEH_PE_DEVICE ||
+ pe->type & EEH_PE_VF) {
if (pe->bus) {
bus = pe->bus;
goto out;
--
1.7.9.5
More information about the Linuxppc-dev
mailing list