[PATCH V4 08/11] powerpc/powernv: Support PCI config restore for VFs

[Wei Yang]

On Fri, May 15, 2015 at 05:27:52PM +1000, Gavin Shan wrote:
>On Fri, May 15, 2015 at 01:46:23PM +0800, Wei Yang wrote:
>>Since skiboot firmware is not aware of VFs, the restore action for VF
>>should be done in kernel.
>>
>>The patch introduces function pnv_eeh_restore_vf_config() to restore PCI
>>config space for VFs after reset.
>>
>>Signed-off-by: Wei Yang <weiyang at linux.vnet.ibm.com>
>>---
>> arch/powerpc/include/asm/pci-bridge.h        |    1 +
>> arch/powerpc/platforms/powernv/eeh-powernv.c |   59 +++++++++++++++++++++++++-
>> arch/powerpc/platforms/powernv/pci.c         |   16 +++++++
>> 3 files changed, 75 insertions(+), 1 deletion(-)
>>
>>diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h
>>index d78afe4..168b991 100644
>>--- a/arch/powerpc/include/asm/pci-bridge.h
>>+++ b/arch/powerpc/include/asm/pci-bridge.h
>>@@ -205,6 +205,7 @@ struct pci_dn {
>> 	int     m64_per_iov;
>> #define IODA_INVALID_M64        (-1)
>> 	int     m64_wins[PCI_SRIOV_NUM_BARS][M64_PER_IOV];
>>+	int	mps;
>> #endif /* CONFIG_PCI_IOV */
>> #endif
>> 	struct list_head child_list;
>>diff --git a/arch/powerpc/platforms/powernv/eeh-powernv.c b/arch/powerpc/platforms/powernv/eeh-powernv.c
>>index 61f1a55..e200ed1 100644
>>--- a/arch/powerpc/platforms/powernv/eeh-powernv.c
>>+++ b/arch/powerpc/platforms/powernv/eeh-powernv.c
>>@@ -1601,6 +1601,59 @@ static int pnv_eeh_next_error(struct eeh_pe **pe)
>> 	return ret;
>> }
>>
>>+#ifdef CONFIG_PCI_IOV
>>+static int pnv_eeh_restore_vf_config(struct pci_dn *pdn)
>>+{
>>+	int pcie_cap, aer_cap, old_mps;
>>+	u32 devctl, cmd, cap2, aer_capctl;
>>+
>
>It's worthy to check if PCIE cap is valid or not.
>
>>+	/* Restore MPS */
>>+	pcie_cap = pnv_eeh_find_cap(pdn, PCI_CAP_ID_EXP);
>>+	if (pcie_cap) {
>>+		old_mps = (ffs(pdn->mps) - 8) << 5;
>>+		eeh_ops->read_config(pdn, pcie_cap + PCI_EXP_DEVCTL, 2, &devctl);
>>+		devctl &= ~PCI_EXP_DEVCTL_PAYLOAD;
>>+		devctl |= old_mps;
>>+		eeh_ops->write_config(pdn, pcie_cap + PCI_EXP_DEVCTL, 2, devctl);
>>+	}
>>+
>>+	/* Disable Completion Timeout */
>>+	if (pcie_cap) {
>>+		eeh_ops->read_config(pdn, pcie_cap + PCI_EXP_DEVCAP2, 4, &cap2);
>>+		if (cap2 & 0x10) {
>
>There should have one macro for "0x10" in pci_regs.h. If so, please use that one.

Actually, no.

I have checked the kernel, it doesn't has this field. That's why I put it
here.

>
>>+			eeh_ops->read_config(pdn, pcie_cap + PCI_EXP_DEVCTL2, 4, &cap2);
>>+			cap2 |= 0x10;
>>+			eeh_ops->write_config(pdn, pcie_cap + PCI_EXP_DEVCTL2, 4, cap2);
>>+		}
>>+	}
>>+
>>+	/* Enable SERR and parity checking */
>>+	eeh_ops->read_config(pdn, PCI_COMMAND, 2, &cmd);
>>+	cmd |= (PCI_COMMAND_PARITY | PCI_COMMAND_SERR);
>>+	eeh_ops->write_config(pdn, PCI_COMMAND, 2, cmd);
>>+
>>+	/* Enable report various errors */
>>+	if (pcie_cap) {
>>+		eeh_ops->read_config(pdn, pcie_cap + PCI_EXP_DEVCTL, 2, &devctl);
>>+		devctl &= ~PCI_EXP_DEVCTL_CERE;
>>+		devctl |= (PCI_EXP_DEVCTL_NFERE |
>>+			   PCI_EXP_DEVCTL_FERE |
>>+			   PCI_EXP_DEVCTL_URRE);
>>+		eeh_ops->write_config(pdn, pcie_cap + PCI_EXP_DEVCTL, 2, devctl);
>>+	}
>>+
>>+	/* Enable ECRC generation and check */
>>+	if (pcie_cap) {
>>+		aer_cap = pnv_eeh_find_ecap(pdn, PCI_EXT_CAP_ID_ERR);
>
>The AER cap should have been cached in eeh-powernv.c::pnv_eeh_probe(). Similar
>to the case of PCIE cap, you need check if the AER cap is valid or not.
>
>>+		eeh_ops->read_config(pdn, aer_cap + PCI_ERR_CAP, 4, &aer_capctl);
>>+		aer_capctl |= (PCI_ERR_CAP_ECRC_GENE | PCI_ERR_CAP_ECRC_CHKE);
>>+		eeh_ops->write_config(pdn, aer_cap + PCI_ERR_CAP, 4, aer_capctl);
>>+	}
>>+
>>+	return 0;
>>+}
>>+#endif /* CONFIG_PCI_IOV */
>>+
>> static int pnv_eeh_restore_config(struct pci_dn *pdn)
>> {
>> 	struct eeh_dev *edev = pdn_to_eeh_dev(pdn);
>>@@ -1611,7 +1664,11 @@ static int pnv_eeh_restore_config(struct pci_dn *pdn)
>> 		return -EEXIST;
>>
>> 	phb = edev->phb->private_data;
>>-	ret = opal_pci_reinit(phb->opal_id,
>>+	/* FW is not VF aware, we rely on OS to restore it */
>
>Please change the comment to:
>
>	/*
>	 * We have to restore the PCI config space after reset since
>	 * the firmware can't see SRIOV VFs.
>	 */
>
>>+	if (edev->physfn)
>>+		ret = pnv_eeh_restore_vf_config(pdn);
>>+	else
>>+		ret = opal_pci_reinit(phb->opal_id,
>> 			      OPAL_REINIT_PCI_DEV, edev->config_addr);
>> 	if (ret) {
>> 		pr_warn("%s: Can't reinit PCI dev 0x%x (%lld)\n",
>>diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c
>>index bca2aeb..31d0258 100644
>>--- a/arch/powerpc/platforms/powernv/pci.c
>>+++ b/arch/powerpc/platforms/powernv/pci.c
>>@@ -781,3 +781,19 @@ machine_subsys_initcall_sync(powernv, tce_iommu_bus_notifier_init);
>> struct pci_controller_ops pnv_pci_controller_ops = {
>> 	.dma_dev_setup = pnv_pci_dma_dev_setup,
>> };
>>+
>>+static void pnv_pci_fixup_vf_caps(struct pci_dev *pdev)
>>+{
>>+	struct pci_dn *pdn = pci_get_pdn(pdev);
>>+	int parent_mps;
>>+
>>+	if (!pdev->is_virtfn)
>>+		return;
>>+
>>+	/* Synchronize MPS for VF and PF */
>>+	parent_mps = pcie_get_mps(pdev->physfn);
>>+	if ((128 << pdev->pcie_mpss) >= parent_mps)
>>+		pcie_set_mps(pdev, parent_mps);
>>+	pdn->mps = pcie_get_mps(pdev);
>>+}
>>+DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pnv_pci_fixup_vf_caps);
>
>Thanks,
>Gavin

-- 
Richard Yang
Help you, Help me