[PATCH 2/2] mmc: sdhci-pltfm: enable interrupt mode to detect card

Lu Y.B. yangbo.lu at freescale.com
Fri May 15 12:31:43 AEST 2015



> -----Original Message-----
> From: Wood Scott-B07421
> Sent: Friday, May 15, 2015 4:22 AM
> To: Lu Yangbo-B47093
> Cc: linuxppc-dev at lists.ozlabs.org; linux-kernel at vger.kernel.org
> Subject: Re: [PATCH 2/2] mmc: sdhci-pltfm: enable interrupt mode to
> detect card
> 
> On Thu, 2015-05-14 at 01:29 -0500, Lu Yangbo-B47093 wrote:
> >
> >
> > > -----Original Message-----
> > > From: Wood Scott-B07421
> > > Sent: Thursday, May 14, 2015 12:37 AM
> > > To: Lu Yangbo-B47093
> > > Cc: linuxppc-dev at lists.ozlabs.org; linux-kernel at vger.kernel.org
> > > Subject: Re: [PATCH 2/2] mmc: sdhci-pltfm: enable interrupt mode to
> > > detect card
> > >
> > > On Wed, 2015-05-13 at 16:20 +0800, Yangbo Lu wrote:
> > > > Enable interrupt mode to detect card instead of polling mode for
> > > > P1020/P4080/P5020/P5040/T1040 by removing the quirk
> > > > SDHCI_QUIRK_BROKEN_CARD_DETECTION. This could improve data
> > > > transferring performance and avoid the call trace caused by
> > > > polling card status sometime.
> > > >
> > > > Signed-off-by: Yangbo Lu <yangbo.lu at freescale.com>
> > > > ---
> > > >  drivers/mmc/host/sdhci-pltfm.c | 7 +++++++
> > > >  1 file changed, 7 insertions(+)
> > > >
> > > > diff --git a/drivers/mmc/host/sdhci-pltfm.c
> > > > b/drivers/mmc/host/sdhci-pltfm.c index c5b01d6..62f4049 100644
> > > > --- a/drivers/mmc/host/sdhci-pltfm.c
> > > > +++ b/drivers/mmc/host/sdhci-pltfm.c
> > > > @@ -102,6 +102,13 @@ void sdhci_get_of_property(struct
> > > > platform_device
> > > *pdev)
> > > >  		    of_device_is_compatible(np, "fsl,mpc8536-esdhc"))
> > > >  			host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
> > > >
> > > > +		if (of_device_is_compatible(np, "fsl,p5040-esdhc") ||
> > > > +			of_device_is_compatible(np, "fsl,p5020-esdhc") ||
> > > > +			of_device_is_compatible(np, "fsl,p4080-esdhc") ||
> > > > +			of_device_is_compatible(np, "fsl,p1020-esdhc") ||
> > > > +			of_device_is_compatible(np, "fsl,t1040-esdhc"))
> > > > +			host->quirks &=
> ~SDHCI_QUIRK_BROKEN_CARD_DETECTION;
> > >
> > > Please don't line up continuation lines with the if-body.  All of
> > > the "of_device_is_compatibles" should start in the same column.
> > Ok, thanks.
> > >
> > > Given that you need to modify the device tree for this, why not just
> > > use SVR?
> > The drivers/mmc/host/sdhci-pltfm.c is not only used by freescale
> platform. So we couldn’t to use SVR here.
> > Thanks.
> 
> I'm sure there'd be ways of rearranging it to make it work, but OK.
> 
> Please send these patches to the MMC list and maintainer (and CC me).  I
> can ACK the first one or apply it separately.
> 
Thank you very much.

Best regards,
Yangbo Lu



More information about the Linuxppc-dev mailing list