[PATCH] QorIQ/TMU: add thermal management support based on TMU
Hongtao Jia
hongtao.jia at freescale.com
Mon May 11 12:38:32 AEST 2015
Hello Eduardo,
As Rui Zhang did not response for a long time.
Could you help to review this Thermal Management driver?
Thanks.
---
Best Regards,
Hongtao
> -----Original Message-----
> From: Jia Hongtao-B38951
> Sent: Tuesday, April 28, 2015 3:34 PM
> To: rui.zhang at intel.com
> Cc: linux-pm at vger.kernel.org; linuxppc-dev at lists.ozlabs.org; Wood Scott-
> B07421; Jia Hongtao-B38951
> Subject: RE: [PATCH] QorIQ/TMU: add thermal management support based on
> TMU
>
> Hello Rui Zhang,
>
> Please help to review this Thermal Management driver.
>
> Thanks.
>
> ---
> Best Regards,
> Hongtao
>
> > -----Original Message-----
> > From: Jia Hongtao [mailto:hongtao.jia at freescale.com]
> > Sent: Friday, April 03, 2015 3:11 PM
> > To: rui.zhang at intel.com
> > Cc: linux-pm at vger.kernel.org; linuxppc-dev at lists.ozlabs.org; Wood
> > Scott- B07421; Jia Hongtao-B38951
> > Subject: [PATCH] QorIQ/TMU: add thermal management support based on
> > TMU
> >
> > It supports one critical trip point and one passive trip point.
> > The cpufreq is used as the cooling device to throttle CPUs when the
> > passive trip is crossed.
> >
> > Signed-off-by: Jia Hongtao <hongtao.jia at freescale.com>
> > ---
> > drivers/thermal/Kconfig | 11 ++
> > drivers/thermal/Makefile | 1 +
> > drivers/thermal/qoriq_thermal.c | 405
> > ++++++++++++++++++++++++++++++++++++++++
> > 3 files changed, 417 insertions(+)
> > create mode 100644 drivers/thermal/qoriq_thermal.c
> >
> > diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index
> > af40db0..c0a8bd1 100644
> > --- a/drivers/thermal/Kconfig
> > +++ b/drivers/thermal/Kconfig
> > @@ -147,6 +147,17 @@ config IMX_THERMAL
> > cpufreq is used as the cooling device to throttle CPUs when the
> > passive trip is crossed.
> >
> > +config QORIQ_THERMAL
> > + tristate "Freescale QorIQ Thermal Monitoring Unit"
> > + depends on CPU_THERMAL
> > + depends on OF
> > + default n
> > + help
> > + Enable thermal management based on Freescale QorIQ Thermal
> > Monitoring
> > + Unit (TMU). It supports one critical trip point and one passive
> > trip
> > + point. The cpufreq is used as the cooling device to throttle CPUs
> > when
> > + the passive trip is crossed.
> > +
> > config SPEAR_THERMAL
> > bool "SPEAr thermal sensor driver"
> > depends on PLAT_SPEAR
> > diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile index
> > fa0dc48..7de4847 100644
> > --- a/drivers/thermal/Makefile
> > +++ b/drivers/thermal/Makefile
> > @@ -31,6 +31,7 @@ obj-$(CONFIG_DOVE_THERMAL) += dove_thermal.o
> > obj-$(CONFIG_DB8500_THERMAL) += db8500_thermal.o
> > obj-$(CONFIG_ARMADA_THERMAL) += armada_thermal.o
> > obj-$(CONFIG_IMX_THERMAL) += imx_thermal.o
> > +obj-$(CONFIG_QORIQ_THERMAL) += qoriq_thermal.o
> > obj-$(CONFIG_DB8500_CPUFREQ_COOLING) += db8500_cpufreq_cooling.o
> > obj-$(CONFIG_INTEL_POWERCLAMP) += intel_powerclamp.o
> > obj-$(CONFIG_X86_PKG_TEMP_THERMAL) += x86_pkg_temp_thermal.o
> > diff --git a/drivers/thermal/qoriq_thermal.c
> > b/drivers/thermal/qoriq_thermal.c new file mode 100644 index
> > 0000000..f5d3a2c
> > --- /dev/null
> > +++ b/drivers/thermal/qoriq_thermal.c
> > @@ -0,0 +1,405 @@
> > +/*
> > + * Copyright 2015 Freescale Semiconductor, Inc.
> > + *
> > + * This program is free software; you can redistribute it and/or
> > +modify
> > it
> > + * under the terms and conditions of the GNU General Public License,
> > + * version 2, as published by the Free Software Foundation.
> > + *
> > + * This program is distributed in the hope it will be useful, but
> > WITHOUT
> > + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
> > + or
> > + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
> > + License
> > for
> > + * more details.
> > + *
> > + */
> > +
> > +/*
> > + * Based on Freescale QorIQ Thermal Monitoring Unit (TMU) */
> > +#include <linux/cpufreq.h> #include <linux/cpu_cooling.h> #include
> > +<linux/module.h> #include <linux/platform_device.h> #include
> > +<linux/err.h> #include <linux/io.h> #include <linux/of.h> #include
> > +<linux/thermal.h>
> > +
> > +#define SITES_MAX 16
> > +
> > +#define TMU_TEMP_PASSIVE 85000
> > +#define TMU_TEMP_CRITICAL 95000
> > +
> > +#define TMU_PASSIVE_DELAY 1000 /* Milliseconds */
> > +#define TMU_POLLING_DELAY 5000
> > +
> > +/* The driver supports 1 passive trip point and 1 critical trip point
> > +*/ enum tmu_thermal_trip {
> > + TMU_TRIP_PASSIVE,
> > + TMU_TRIP_CRITICAL,
> > + TMU_TRIP_NUM,
> > +};
> > +
> > +/*
> > + * QorIQ TMU Registers
> > + */
> > +struct qoriq_tmu_site_regs {
> > + __be32 tritsr; /* Immediate Temperature Site Register */
> > + __be32 tratsr; /* Average Temperature Site Register */
> > + u8 res0[0x8];
> > +} __packed;
> > +
> > +struct qoriq_tmu_regs {
> > + __be32 tmr; /* Mode Register */
> > +#define TMR_DISABLE 0x0
> > +#define TMR_ME 0x80000000
> > +#define TMR_ALPF 0x0c000000
> > +#define TMR_MSITE 0x00008000
> > +#define TMR_ALL (TMR_ME | TMR_ALPF | TMR_MSITE)
> > + __be32 tsr; /* Status Register */
> > + __be32 tmtmir; /* Temperature measurement interval
> > Register */
> > +#define TMTMIR_DEFAULT 0x00000007
> > + u8 res0[0x14];
> > + __be32 tier; /* Interrupt Enable Register */
> > +#define TIER_DISABLE 0x0
> > + __be32 tidr; /* Interrupt Detect Register */
> > + __be32 tiscr; /* Interrupt Site Capture Register */
> > + __be32 ticscr; /* Interrupt Critical Site Capture Register
> > */
> > + u8 res1[0x10];
> > + __be32 tmhtcrh; /* High Temperature Capture Register */
> > + __be32 tmhtcrl; /* Low Temperature Capture Register */
> > + u8 res2[0x8];
> > + __be32 tmhtitr; /* High Temperature Immediate Threshold */
> > + __be32 tmhtatr; /* High Temperature Average Threshold */
> > + __be32 tmhtactr; /* High Temperature Average Crit Threshold */
> > + u8 res3[0x24];
> > + __be32 ttcfgr; /* Temperature Configuration Register */
> > + __be32 tscfgr; /* Sensor Configuration Register */
> > + u8 res4[0x78];
> > + struct qoriq_tmu_site_regs site[SITES_MAX];
> > + u8 res5[0x9f8];
> > + __be32 ipbrr0; /* IP Block Revision Register 0 */
> > + __be32 ipbrr1; /* IP Block Revision Register 1 */
> > + u8 res6[0x310];
> > + __be32 ttr0cr; /* Temperature Range 0 Control Register */
> > + __be32 ttr1cr; /* Temperature Range 1 Control Register */
> > + __be32 ttr2cr; /* Temperature Range 2 Control Register */
> > + __be32 ttr3cr; /* Temperature Range 3 Control Register */
> > +};
> > +
> > +/*
> > + * Thermal zone data
> > + */
> > +struct qoriq_tmu_data {
> > + struct thermal_zone_device *tz;
> > + struct thermal_cooling_device *cdev;
> > + enum thermal_device_mode mode;
> > + unsigned long temp_passive;
> > + unsigned long temp_critical;
> > + struct qoriq_tmu_regs __iomem *regs; };
> > +
> > +static int tmu_get_mode(struct thermal_zone_device *tz,
> > + enum thermal_device_mode *mode)
> > +{
> > + struct qoriq_tmu_data *data = tz->devdata;
> > +
> > + *mode = data->mode;
> > +
> > + return 0;
> > +}
> > +
> > +static int tmu_set_mode(struct thermal_zone_device *tz,
> > + enum thermal_device_mode mode)
> > +{
> > + struct qoriq_tmu_data *data = tz->devdata;
> > +
> > + if (mode == THERMAL_DEVICE_ENABLED) {
> > + tz->polling_delay = TMU_POLLING_DELAY;
> > + tz->passive_delay = TMU_PASSIVE_DELAY;
> > + thermal_zone_device_update(tz);
> > + } else {
> > + tz->polling_delay = 0;
> > + tz->passive_delay = 0;
> > + }
> > +
> > + data->mode = mode;
> > +
> > + return 0;
> > +}
> > +
> > +static int tmu_get_temp(struct thermal_zone_device *tz, unsigned long
> > *temp)
> > +{
> > + u8 val;
> > + struct qoriq_tmu_data *data = tz->devdata;
> > +
> > + val = ioread32be(&data->regs->site[0].tritsr);
> > + *temp = (unsigned long)val * 1000;
> > +
> > + return 0;
> > +}
> > +
> > +static int tmu_get_trip_type(struct thermal_zone_device *tz, int trip,
> > + enum thermal_trip_type *type) {
> > + *type = (trip == TMU_TRIP_PASSIVE) ? THERMAL_TRIP_PASSIVE :
> > + THERMAL_TRIP_CRITICAL;
> > + return 0;
> > +}
> > +
> > +static int tmu_get_trip_temp(struct thermal_zone_device *tz, int trip,
> > + unsigned long *temp)
> > +{
> > + struct qoriq_tmu_data *data = tz->devdata;
> > +
> > + *temp = (trip == TMU_TRIP_PASSIVE) ? data->temp_passive :
> > + data->temp_critical;
> > + return 0;
> > +}
> > +
> > +static int tmu_get_crit_temp(struct thermal_zone_device *tz,
> > + unsigned long *temp)
> > +{
> > + struct qoriq_tmu_data *data = tz->devdata;
> > +
> > + *temp = data->temp_critical;
> > + return 0;
> > +}
> > +
> > +static int tmu_get_trend(struct thermal_zone_device *thermal,
> > + int trip, enum thermal_trend *trend) {
> > + int ret;
> > + unsigned long trip_temp;
> > +
> > + ret = tmu_get_trip_temp(thermal, trip, &trip_temp);
> > + if (ret < 0)
> > + return ret;
> > +
> > + if (thermal->temperature >= trip_temp)
> > + *trend = THERMAL_TREND_RAISE_FULL;
> > + else
> > + *trend = THERMAL_TREND_DROP_FULL;
> > +
> > + return 0;
> > +}
> > +
> > +static int tmu_bind(struct thermal_zone_device *tz,
> > + struct thermal_cooling_device *cdev) {
> > + int ret;
> > +
> > + ret = thermal_zone_bind_cooling_device(tz, TMU_TRIP_PASSIVE, cdev,
> > + THERMAL_NO_LIMIT,
> > + THERMAL_NO_LIMIT);
> > + if (ret) {
> > + dev_err(&tz->device,
> > + "Binding zone %s with cdev %s failed:%d\n",
> > + tz->type, cdev->type, ret);
> > + return ret;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int tmu_unbind(struct thermal_zone_device *tz,
> > + struct thermal_cooling_device *cdev) {
> > + int ret;
> > +
> > + ret = thermal_zone_unbind_cooling_device(tz, TMU_TRIP_PASSIVE,
> > cdev);
> > + if (ret) {
> > + dev_err(&tz->device,
> > + "Unbinding zone %s with cdev %s failed:%d\n",
> > + tz->type, cdev->type, ret);
> > + return ret;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static void qoriq_tmu_calibration(struct platform_device *pdev) {
> > + int i, val, len;
> > + const __be32 *calibration;
> > + struct device_node *node = pdev->dev.of_node;
> > + struct qoriq_tmu_data *data = dev_get_drvdata(&pdev->dev);
> > +
> > + /* Disable monitoring before calibration */
> > + iowrite32be(TMR_DISABLE, &data->regs->tmr);
> > +
> > + calibration = of_get_property(node, "calibration", &len);
> > + if (calibration == NULL) {
> > + pr_err("TMU: Failed to get calibration data.\n");
> > + return;
> > + }
> > +
> > + for (i = 0; i < len; i += 8, calibration += 2) {
> > + val = (int)of_read_number(calibration, 1);
> > + iowrite32be(val, &data->regs->ttcfgr);
> > + val = (int)of_read_number(calibration + 1, 1);
> > + iowrite32be(val, &data->regs->tscfgr);
> > + }
> > +}
> > +
> > +static void qoriq_tmu_init_device(struct qoriq_tmu_data *data) {
> > + /* Disable interrupt, using polling instead */
> > + iowrite32be(TIER_DISABLE, &data->regs->tier);
> > +
> > + /* Set update_interval */
> > + iowrite32be(TMTMIR_DEFAULT, &data->regs->tmtmir);
> > +
> > + /* Enable monitoring */
> > + iowrite32be(TMR_ALL, &data->regs->tmr); }
> > +
> > +static struct thermal_zone_device_ops tmu_tz_ops = {
> > + .bind = tmu_bind,
> > + .unbind = tmu_unbind,
> > + .get_temp = tmu_get_temp,
> > + .get_trend = tmu_get_trend,
> > + .get_mode = tmu_get_mode,
> > + .set_mode = tmu_set_mode,
> > + .get_trip_type = tmu_get_trip_type,
> > + .get_trip_temp = tmu_get_trip_temp,
> > + .get_crit_temp = tmu_get_crit_temp,
> > +};
> > +
> > +static int qoriq_tmu_probe(struct platform_device *pdev) {
> > + int ret;
> > + struct cpumask clip_cpus;
> > + struct qoriq_tmu_data *data;
> > +
> > + if (!cpufreq_get_current_driver()) {
> > + dev_dbg(&pdev->dev, "No cpufreq driver yet\n");
> > + return -EPROBE_DEFER;
> > + }
> > +
> > + if (!pdev->dev.of_node) {
> > + dev_err(&pdev->dev, "Device OF-Node is NULL");
> > + return -EFAULT;
> > + }
> > +
> > + data = devm_kzalloc(&pdev->dev, sizeof(struct qoriq_tmu_data),
> > + GFP_KERNEL);
> > + if (!data)
> > + return -ENOMEM;
> > +
> > + dev_set_drvdata(&pdev->dev, data);
> > + data->regs = of_iomap(pdev->dev.of_node, 0);
> > +
> > + if (!data->regs) {
> > + dev_err(&pdev->dev, "Failed to get memory region\n");
> > + ret = -ENODEV;
> > + goto err_iomap;
> > + }
> > +
> > + qoriq_tmu_calibration(pdev); /* TMU calibration */
> > +
> > + qoriq_tmu_init_device(data); /* TMU initialization */
> > +
> > + cpumask_setall(&clip_cpus);
> > + data->cdev = cpufreq_cooling_register(&clip_cpus);
> > + if (IS_ERR(data->cdev)) {
> > + ret = PTR_ERR(data->cdev);
> > + dev_err(&data->cdev->device,
> > + "Failed to register cpufreq cooling device: %d\n", ret);
> > + goto err_cooling;
> > + }
> > +
> > + data->temp_passive = TMU_TEMP_PASSIVE;
> > + data->temp_critical = TMU_TEMP_CRITICAL;
> > + data->tz = thermal_zone_device_register("tmu_thermal_zone",
> > + TMU_TRIP_NUM,
> > + 0, data,
> > + &tmu_tz_ops, NULL,
> > + TMU_PASSIVE_DELAY,
> > + TMU_POLLING_DELAY);
> > +
> > + if (IS_ERR(data->tz)) {
> > + ret = PTR_ERR(data->tz);
> > + dev_err(&pdev->dev,
> > + "Failed to register thermal zone device %d\n", ret);
> > + goto err_thermal;
> > + }
> > +
> > + data->mode = THERMAL_DEVICE_ENABLED;
> > +
> > + return 0;
> > +
> > +err_thermal:
> > + cpufreq_cooling_unregister(data->cdev);
> > +
> > +err_cooling:
> > + iounmap(data->regs);
> > +
> > +err_iomap:
> > + dev_set_drvdata(&pdev->dev, NULL);
> > + devm_kfree(&pdev->dev, data);
> > +
> > + return ret;
> > +}
> > +
> > +static int qoriq_tmu_remove(struct platform_device *pdev) {
> > + struct qoriq_tmu_data *data = dev_get_drvdata(&pdev->dev);
> > +
> > + /* Disable monitoring */
> > + iowrite32be(TMR_DISABLE, &data->regs->tmr);
> > +
> > + thermal_zone_device_unregister(data->tz);
> > + cpufreq_cooling_unregister(data->cdev);
> > + iounmap(data->regs);
> > +
> > + dev_set_drvdata(&pdev->dev, NULL);
> > + devm_kfree(&pdev->dev, data);
> > +
> > + return 0;
> > +}
> > +
> > +#ifdef CONFIG_PM_SLEEP
> > +static int qoriq_tmu_suspend(struct device *dev) {
> > + struct qoriq_tmu_data *data = dev_get_drvdata(dev);
> > +
> > + /* Disable monitoring */
> > + iowrite32be(TMR_DISABLE, &data->regs->tmr);
> > +
> > + return 0;
> > +}
> > +
> > +static int qoriq_tmu_resume(struct device *dev) {
> > + struct qoriq_tmu_data *data = dev_get_drvdata(dev);
> > +
> > + /* Enable monitoring */
> > + iowrite32be(TMR_ALL, &data->regs->tmr);
> > +
> > + return 0;
> > +}
> > +#endif
> > +
> > +static SIMPLE_DEV_PM_OPS(qoriq_tmu_pm_ops,
> > + qoriq_tmu_suspend, qoriq_tmu_resume);
> > +
> > +static const struct of_device_id qoriq_tmu_match[] = {
> > + { .compatible = "fsl,qoriq-tmu", },
> > + {},
> > +};
> > +
> > +static struct platform_driver qoriq_tmu = {
> > + .driver = {
> > + .owner = THIS_MODULE,
> > + .name = "qoriq_thermal",
> > + .pm = &qoriq_tmu_pm_ops,
> > + .of_match_table = qoriq_tmu_match,
> > + },
> > + .probe = qoriq_tmu_probe,
> > + .remove = qoriq_tmu_remove,
> > +};
> > +module_platform_driver(qoriq_tmu);
> > +
> > +MODULE_AUTHOR("Jia Hongtao <hongtao.jia at freescale.com>");
> > +MODULE_DESCRIPTION("Freescale QorIQ Thermal Monitoring Unit driver");
> > +MODULE_LICENSE("GPL v2");
> > --
> > 2.1.0.27.g96db324
More information about the Linuxppc-dev
mailing list