[PATCH v3 3/8] hvc: Convert to using interrupts instead of opal events

Alistair Popple alistair at popple.id.au
Thu May 7 13:16:13 AEST 2015


Convert the opal hvc driver to use the new irqchip to register for
opal events. As older firmware versions may not have device tree
bindings for the interrupt parent we just use a hardcoded hwirq based
on the event number.

Signed-off-by: Alistair Popple <alistair at popple.id.au>
---
 drivers/tty/hvc/hvc_opal.c | 33 ++++++++++-----------------------
 1 file changed, 10 insertions(+), 23 deletions(-)

diff --git a/drivers/tty/hvc/hvc_opal.c b/drivers/tty/hvc/hvc_opal.c
index 543b234..47b54c6 100644
--- a/drivers/tty/hvc/hvc_opal.c
+++ b/drivers/tty/hvc/hvc_opal.c
@@ -29,6 +29,7 @@
 #include <linux/of.h>
 #include <linux/of_platform.h>
 #include <linux/export.h>
+#include <linux/interrupt.h>
 
 #include <asm/hvconsole.h>
 #include <asm/prom.h>
@@ -61,7 +62,6 @@ static struct hvc_opal_priv *hvc_opal_privs[MAX_NR_HVC_CONSOLES];
 /* For early boot console */
 static struct hvc_opal_priv hvc_opal_boot_priv;
 static u32 hvc_opal_boot_termno;
-static bool hvc_opal_event_registered;
 
 static const struct hv_ops hvc_opal_raw_ops = {
 	.get_chars = opal_get_chars,
@@ -162,28 +162,15 @@ static const struct hv_ops hvc_opal_hvsi_ops = {
 	.tiocmset = hvc_opal_hvsi_tiocmset,
 };
 
-static int hvc_opal_console_event(struct notifier_block *nb,
-				  unsigned long events, void *change)
-{
-	if (events & OPAL_EVENT_CONSOLE_INPUT)
-		hvc_kick();
-	return 0;
-}
-
-static struct notifier_block hvc_opal_console_nb = {
-	.notifier_call	= hvc_opal_console_event,
-};
-
 static int hvc_opal_probe(struct platform_device *dev)
 {
 	const struct hv_ops *ops;
 	struct hvc_struct *hp;
 	struct hvc_opal_priv *pv;
 	hv_protocol_t proto;
-	unsigned int termno, boot = 0;
+	unsigned int termno, irq, boot = 0;
 	const __be32 *reg;
 
-
 	if (of_device_is_compatible(dev->dev.of_node, "ibm,opal-console-raw")) {
 		proto = HV_PROTOCOL_RAW;
 		ops = &hvc_opal_raw_ops;
@@ -227,18 +214,18 @@ static int hvc_opal_probe(struct platform_device *dev)
 		dev->dev.of_node->full_name,
 		boot ? " (boot console)" : "");
 
-	/* We don't do IRQ ... */
-	hp = hvc_alloc(termno, 0, ops, MAX_VIO_PUT_CHARS);
+	irq = opal_event_request(ilog2(OPAL_EVENT_CONSOLE_INPUT));
+	if (!irq) {
+		pr_err("hvc_opal: Unable to map interrupt for device %s\n",
+			dev->dev.of_node->full_name);
+		return irq;
+	}
+
+	hp = hvc_alloc(termno, irq, ops, MAX_VIO_PUT_CHARS);
 	if (IS_ERR(hp))
 		return PTR_ERR(hp);
 	dev_set_drvdata(&dev->dev, hp);
 
-	/* ...  but we use OPAL event to kick the console */
-	if (!hvc_opal_event_registered) {
-		opal_notifier_register(&hvc_opal_console_nb);
-		hvc_opal_event_registered = true;
-	}
-
 	return 0;
 }
 
-- 
1.8.3.2



More information about the Linuxppc-dev mailing list