[PATCH 06/10] drivers/crypto/nx: add NX-842 platform frontend driver
Dan Streetman
ddstreet at ieee.org
Thu May 7 02:51:02 AEST 2015
Add NX-842 frontend that allows using either the pSeries platform or
PowerNV platform driver (to be added by later patch) for the NX-842
hardware. Update the MAINTAINERS file to include the new filenames.
Update Kconfig files to clarify titles and descriptions, and correct
dependencies.
Signed-off-by: Dan Streetman <ddstreet at ieee.org>
---
MAINTAINERS | 2 +-
drivers/crypto/Kconfig | 10 +--
drivers/crypto/nx/Kconfig | 35 ++++++---
drivers/crypto/nx/Makefile | 4 +-
drivers/crypto/nx/nx-842-pseries.c | 57 +++++++--------
drivers/crypto/nx/nx-842.c | 144 +++++++++++++++++++++++++++++++++++++
drivers/crypto/nx/nx-842.h | 32 +++++++++
include/linux/nx842.h | 10 +--
8 files changed, 245 insertions(+), 49 deletions(-)
create mode 100644 drivers/crypto/nx/nx-842.c
create mode 100644 drivers/crypto/nx/nx-842.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 5a5c1dc..e71855f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4870,7 +4870,7 @@ F: drivers/crypto/nx/
IBM Power 842 compression accelerator
M: Dan Streetman <ddstreet at us.ibm.com>
S: Supported
-F: drivers/crypto/nx/nx-842.c
+F: drivers/crypto/nx/nx-842*
F: include/linux/nx842.h
F: include/linux/sw842.h
F: crypto/842.c
diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig
index 033c0c8..872de26 100644
--- a/drivers/crypto/Kconfig
+++ b/drivers/crypto/Kconfig
@@ -312,11 +312,13 @@ config CRYPTO_DEV_S5P
algorithms execution.
config CRYPTO_DEV_NX
- bool "Support for IBM Power7+ in-Nest cryptographic acceleration"
- depends on PPC64 && IBMVIO && !CPU_LITTLE_ENDIAN
- default n
+ bool "Support for IBM PowerPC Nest (NX) cryptographic acceleration"
+ depends on PPC64
help
- Support for Power7+ in-Nest cryptographic acceleration.
+ This enables support for the NX hardware cryptographic accelerator
+ coprocessor that is in IBM PowerPC P7+ or later processors. This
+ does not actually enable any drivers, it only allows you to select
+ which acceleration type (encryption and/or compression) to enable.
if CRYPTO_DEV_NX
source "drivers/crypto/nx/Kconfig"
diff --git a/drivers/crypto/nx/Kconfig b/drivers/crypto/nx/Kconfig
index f826166..34013f7 100644
--- a/drivers/crypto/nx/Kconfig
+++ b/drivers/crypto/nx/Kconfig
@@ -1,7 +1,9 @@
+
config CRYPTO_DEV_NX_ENCRYPT
- tristate "Encryption acceleration support"
- depends on PPC64 && IBMVIO
+ tristate "Encryption acceleration support on pSeries platform"
+ depends on PPC_PSERIES && IBMVIO && !CPU_LITTLE_ENDIAN
default y
+ select CRYPTO_ALGAPI
select CRYPTO_AES
select CRYPTO_CBC
select CRYPTO_ECB
@@ -12,15 +14,30 @@ config CRYPTO_DEV_NX_ENCRYPT
select CRYPTO_SHA256
select CRYPTO_SHA512
help
- Support for Power7+ in-Nest encryption acceleration. This
- module supports acceleration for AES and SHA2 algorithms. If you
- choose 'M' here, this module will be called nx_crypto.
+ Support for PowerPC Nest (NX) encryption acceleration. This
+ module supports acceleration for AES and SHA2 algorithms on
+ the pSeries platform. If you choose 'M' here, this module
+ will be called nx_crypto.
config CRYPTO_DEV_NX_COMPRESS
tristate "Compression acceleration support"
- depends on PPC64 && IBMVIO
default y
help
- Support for Power7+ in-Nest compression acceleration. This
- module supports acceleration for AES and SHA2 algorithms. If you
- choose 'M' here, this module will be called nx_compress.
+ Support for PowerPC Nest (NX) compression acceleration. This
+ module supports acceleration for compressing memory with the 842
+ algorithm. One of the platform drivers must be selected also.
+ If you choose 'M' here, this module will be called nx_compress.
+
+if CRYPTO_DEV_NX_COMPRESS
+
+config CRYPTO_DEV_NX_COMPRESS_PSERIES
+ tristate "Compression acceleration support on pSeries platform"
+ depends on PPC_PSERIES && IBMVIO && !CPU_LITTLE_ENDIAN
+ default y
+ help
+ Support for PowerPC Nest (NX) compression acceleration. This
+ module supports acceleration for compressing memory with the 842
+ algorithm. This supports NX hardware on the pSeries platform.
+ If you choose 'M' here, this module will be called nx_compress_pseries.
+
+endif
diff --git a/drivers/crypto/nx/Makefile b/drivers/crypto/nx/Makefile
index 8669ffa..5d9f4bc 100644
--- a/drivers/crypto/nx/Makefile
+++ b/drivers/crypto/nx/Makefile
@@ -11,4 +11,6 @@ nx-crypto-objs := nx.o \
nx-sha512.o
obj-$(CONFIG_CRYPTO_DEV_NX_COMPRESS) += nx-compress.o
-nx-compress-objs := nx-842-pseries.o
+obj-$(CONFIG_CRYPTO_DEV_NX_COMPRESS_PSERIES) += nx-compress-pseries.o
+nx-compress-objs := nx-842.o
+nx-compress-pseries-objs := nx-842-pseries.o
diff --git a/drivers/crypto/nx/nx-842-pseries.c b/drivers/crypto/nx/nx-842-pseries.c
index 887196e..9b83c9e 100644
--- a/drivers/crypto/nx/nx-842-pseries.c
+++ b/drivers/crypto/nx/nx-842-pseries.c
@@ -21,18 +21,13 @@
* Seth Jennings <sjenning at linux.vnet.ibm.com>
*/
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/nx842.h>
-#include <linux/of.h>
-#include <linux/slab.h>
-
#include <asm/page.h>
#include <asm/vio.h>
+#include "nx-842.h"
#include "nx_csbcpb.h" /* struct nx_csbcpb */
-#define MODULE_NAME "nx-compress"
+#define MODULE_NAME NX842_PSERIES_MODULE_NAME
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Robert Jennings <rcj at linux.vnet.ibm.com>");
MODULE_DESCRIPTION("842 H/W Compression driver for IBM Power processors");
@@ -236,18 +231,6 @@ struct nx842_workmem {
};
};
-int nx842_get_workmem_size(void)
-{
- return sizeof(struct nx842_workmem) + NX842_HW_PAGE_SIZE;
-}
-EXPORT_SYMBOL_GPL(nx842_get_workmem_size);
-
-int nx842_get_workmem_size_aligned(void)
-{
- return sizeof(struct nx842_workmem);
-}
-EXPORT_SYMBOL_GPL(nx842_get_workmem_size_aligned);
-
static int nx842_validate_result(struct device *dev,
struct cop_status_block *csb)
{
@@ -300,7 +283,7 @@ static int nx842_validate_result(struct device *dev,
}
/**
- * nx842_compress - Compress data using the 842 algorithm
+ * nx842_pseries_compress - Compress data using the 842 algorithm
*
* Compression provide by the NX842 coprocessor on IBM Power systems.
* The input buffer is compressed and the result is stored in the
@@ -315,7 +298,7 @@ static int nx842_validate_result(struct device *dev,
* @out: Pointer to output buffer
* @outlen: Length of output buffer
* @wrkmem: ptr to buffer for working memory, size determined by
- * nx842_get_workmem_size()
+ * NX842_MEM_COMPRESS
*
* Returns:
* 0 Success, output of length @outlen stored in the buffer at @out
@@ -325,8 +308,9 @@ static int nx842_validate_result(struct device *dev,
* -EIO Internal error
* -ENODEV Hardware unavailable
*/
-int nx842_compress(const unsigned char *in, unsigned int inlen,
- unsigned char *out, unsigned int *outlen, void *wmem)
+static int nx842_pseries_compress(const unsigned char *in, unsigned int inlen,
+ unsigned char *out, unsigned int *outlen,
+ void *wmem)
{
struct nx842_header *hdr;
struct nx842_devdata *local_devdata;
@@ -493,13 +477,12 @@ unlock:
rcu_read_unlock();
return ret;
}
-EXPORT_SYMBOL_GPL(nx842_compress);
static int sw842_decompress(const unsigned char *, int, unsigned char *, int *,
const void *);
/**
- * nx842_decompress - Decompress data using the 842 algorithm
+ * nx842_pseries_decompress - Decompress data using the 842 algorithm
*
* Decompression provide by the NX842 coprocessor on IBM Power systems.
* The input buffer is decompressed and the result is stored in the
@@ -515,7 +498,7 @@ static int sw842_decompress(const unsigned char *, int, unsigned char *, int *,
* @out: Pointer to output buffer, must be page aligned
* @outlen: Length of output buffer, must be PAGE_SIZE
* @wrkmem: ptr to buffer for working memory, size determined by
- * nx842_get_workmem_size()
+ * NX842_MEM_COMPRESS
*
* Returns:
* 0 Success, output of length @outlen stored in the buffer at @out
@@ -525,8 +508,9 @@ static int sw842_decompress(const unsigned char *, int, unsigned char *, int *,
* -EINVAL Bad input data encountered when attempting decompress
* -EIO Internal error
*/
-int nx842_decompress(const unsigned char *in, unsigned int inlen,
- unsigned char *out, unsigned int *outlen, void *wmem)
+static int nx842_pseries_decompress(const unsigned char *in, unsigned int inlen,
+ unsigned char *out, unsigned int *outlen,
+ void *wmem)
{
struct nx842_header *hdr;
struct nx842_devdata *local_devdata;
@@ -694,7 +678,6 @@ unlock:
rcu_read_unlock();
return ret;
}
-EXPORT_SYMBOL_GPL(nx842_decompress);
/**
* nx842_OF_set_defaults -- Set default (disabled) values for devdata
@@ -1130,6 +1113,12 @@ static struct attribute_group nx842_attribute_group = {
.attrs = nx842_sysfs_entries,
};
+static struct nx842_driver nx842_pseries_driver = {
+ .owner = THIS_MODULE,
+ .compress = nx842_pseries_compress,
+ .decompress = nx842_pseries_decompress,
+};
+
static int __init nx842_probe(struct vio_dev *viodev,
const struct vio_device_id *id)
{
@@ -1192,6 +1181,8 @@ static int __init nx842_probe(struct vio_dev *viodev,
goto error;
}
+ nx842_register_driver(&nx842_pseries_driver);
+
return 0;
error_unlock:
@@ -1222,11 +1213,14 @@ static int __exit nx842_remove(struct vio_dev *viodev)
if (old_devdata)
kfree(old_devdata->counters);
kfree(old_devdata);
+
+ nx842_unregister_driver(&nx842_pseries_driver);
+
return 0;
}
static struct vio_device_id nx842_driver_ids[] = {
- {"ibm,compression-v1", "ibm,compression"},
+ {NX842_PSERIES_COMPAT_NAME "-v1", NX842_PSERIES_COMPAT_NAME},
{"", ""},
};
@@ -1243,6 +1237,8 @@ static int __init nx842_init(void)
struct nx842_devdata *new_devdata;
pr_info("Registering IBM Power 842 compression driver\n");
+ BUILD_BUG_ON(sizeof(struct nx842_workmem) > NX842_MEM_COMPRESS);
+
RCU_INIT_POINTER(devdata, NULL);
new_devdata = kzalloc(sizeof(*new_devdata), GFP_KERNEL);
if (!new_devdata) {
@@ -1272,6 +1268,7 @@ static void __exit nx842_exit(void)
if (old_devdata)
dev_set_drvdata(old_devdata->dev, NULL);
kfree(old_devdata);
+ nx842_unregister_driver(&nx842_pseries_driver);
vio_unregister_driver(&nx842_driver);
}
diff --git a/drivers/crypto/nx/nx-842.c b/drivers/crypto/nx/nx-842.c
new file mode 100644
index 0000000..f1f378e
--- /dev/null
+++ b/drivers/crypto/nx/nx-842.c
@@ -0,0 +1,144 @@
+/*
+ * Driver frontend for IBM Power 842 compression accelerator
+ *
+ * Copyright (C) 2015 Dan Streetman, IBM Corp
+ *
+ * Designer of the Power data compression engine:
+ * Bulent Abali <abali at us.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include "nx-842.h"
+
+#define MODULE_NAME "nx-compress"
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Dan Streetman <ddstreet at ieee.org>");
+MODULE_DESCRIPTION("842 H/W Compression driver for IBM Power processors");
+
+/* Only one driver is expected, based on the HW platform */
+static struct nx842_driver *nx842_driver;
+static DEFINE_SPINLOCK(nx842_driver_lock); /* protects driver pointers */
+
+void nx842_register_driver(struct nx842_driver *driver)
+{
+ spin_lock(&nx842_driver_lock);
+
+ if (nx842_driver) {
+ pr_err("can't register driver %s, already using driver %s\n",
+ driver->owner->name, nx842_driver->owner->name);
+ } else {
+ pr_info("registering driver %s\n", driver->owner->name);
+ nx842_driver = driver;
+ }
+
+ spin_unlock(&nx842_driver_lock);
+}
+EXPORT_SYMBOL_GPL(nx842_register_driver);
+
+void nx842_unregister_driver(struct nx842_driver *driver)
+{
+ spin_lock(&nx842_driver_lock);
+
+ if (nx842_driver == driver) {
+ pr_info("unregistering driver %s\n", driver->owner->name);
+ nx842_driver = NULL;
+ } else if (nx842_driver) {
+ pr_err("can't unregister driver %s, using driver %s\n",
+ driver->owner->name, nx842_driver->owner->name);
+ } else {
+ pr_err("can't unregister driver %s, no driver in use\n",
+ driver->owner->name);
+ }
+
+ spin_unlock(&nx842_driver_lock);
+}
+EXPORT_SYMBOL_GPL(nx842_unregister_driver);
+
+static struct nx842_driver *get_driver(void)
+{
+ struct nx842_driver *driver = NULL;
+
+ spin_lock(&nx842_driver_lock);
+
+ driver = nx842_driver;
+
+ if (driver && !try_module_get(driver->owner))
+ driver = NULL;
+
+ spin_unlock(&nx842_driver_lock);
+
+ return driver;
+}
+
+static void put_driver(struct nx842_driver *driver)
+{
+ module_put(driver->owner);
+}
+
+int nx842_compress(const unsigned char *in, unsigned int in_len,
+ unsigned char *out, unsigned int *out_len,
+ void *wrkmem)
+{
+ struct nx842_driver *driver = get_driver();
+ int ret;
+
+ if (!driver)
+ return -ENODEV;
+
+ ret = driver->compress(in, in_len, out, out_len, wrkmem);
+
+ put_driver(driver);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(nx842_compress);
+
+int nx842_decompress(const unsigned char *in, unsigned int in_len,
+ unsigned char *out, unsigned int *out_len,
+ void *wrkmem)
+{
+ struct nx842_driver *driver = get_driver();
+ int ret;
+
+ if (!driver)
+ return -ENODEV;
+
+ ret = driver->decompress(in, in_len, out, out_len, wrkmem);
+
+ put_driver(driver);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(nx842_decompress);
+
+static __init int nx842_init(void)
+{
+ pr_info("loading\n");
+
+ if (of_find_compatible_node(NULL, NULL, NX842_PSERIES_COMPAT_NAME))
+ request_module_nowait(NX842_PSERIES_MODULE_NAME);
+ else
+ pr_err("no nx842 driver found.\n");
+
+ pr_info("loaded\n");
+
+ return 0;
+}
+module_init(nx842_init);
+
+static void __exit nx842_exit(void)
+{
+ pr_info("NX842 unloaded\n");
+}
+module_exit(nx842_exit);
diff --git a/drivers/crypto/nx/nx-842.h b/drivers/crypto/nx/nx-842.h
new file mode 100644
index 0000000..2a5d4e1
--- /dev/null
+++ b/drivers/crypto/nx/nx-842.h
@@ -0,0 +1,32 @@
+
+#ifndef __NX_842_H__
+#define __NX_842_H__
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/nx842.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+
+struct nx842_driver {
+ struct module *owner;
+
+ int (*compress)(const unsigned char *in, unsigned int in_len,
+ unsigned char *out, unsigned int *out_len,
+ void *wrkmem);
+ int (*decompress)(const unsigned char *in, unsigned int in_len,
+ unsigned char *out, unsigned int *out_len,
+ void *wrkmem);
+};
+
+void nx842_register_driver(struct nx842_driver *driver);
+void nx842_unregister_driver(struct nx842_driver *driver);
+
+
+/* To allow the main nx-compress module to load platform module */
+#define NX842_PSERIES_MODULE_NAME "nx-compress-pseries"
+#define NX842_PSERIES_COMPAT_NAME "ibm,compression"
+
+
+#endif /* __NX_842_H__ */
diff --git a/include/linux/nx842.h b/include/linux/nx842.h
index a4d324c..d919c22 100644
--- a/include/linux/nx842.h
+++ b/include/linux/nx842.h
@@ -1,11 +1,13 @@
#ifndef __NX842_H__
#define __NX842_H__
-int nx842_get_workmem_size(void);
-int nx842_get_workmem_size_aligned(void);
+#define __NX842_PSERIES_MEM_COMPRESS ((PAGE_SIZE * 2) + 10240)
+
+#define NX842_MEM_COMPRESS __NX842_PSERIES_MEM_COMPRESS
+
int nx842_compress(const unsigned char *in, unsigned int in_len,
- unsigned char *out, unsigned int *out_len, void *wrkmem);
+ unsigned char *out, unsigned int *out_len, void *wrkmem);
int nx842_decompress(const unsigned char *in, unsigned int in_len,
- unsigned char *out, unsigned int *out_len, void *wrkmem);
+ unsigned char *out, unsigned int *out_len, void *wrkmem);
#endif
--
2.1.0
More information about the Linuxppc-dev
mailing list