[PATCH] drivers/mtd: add powernv flash MTD abstraction driver

Cyril Bur cyrilbur at gmail.com
Mon May 4 16:42:19 AEST 2015


Powerpc powernv platforms allow access to certain system flash devices
through a firmwarwe interface. This change adds an mtd driver for these
flash devices.

Minor updates from Jeremy Kerr and Joel Stanley.

Signed-off-by: Cyril Bur <cyrilbur at gmail.com>
Signed-off-by: Joel Stanley <joel at jms.id.au>
Signed-off-by: Jeremy Kerr <jk at ozlabs.org>
---
 drivers/mtd/devices/Kconfig         |   6 +
 drivers/mtd/devices/Makefile        |   1 +
 drivers/mtd/devices/powernv_flash.c | 288 ++++++++++++++++++++++++++++++++++++
 3 files changed, 295 insertions(+)
 create mode 100644 drivers/mtd/devices/powernv_flash.c

diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig
index c49d0b1..5065e7c 100644
--- a/drivers/mtd/devices/Kconfig
+++ b/drivers/mtd/devices/Kconfig
@@ -195,6 +195,12 @@ config MTD_BLOCK2MTD
 	  Testing MTD users (eg JFFS2) on large media and media that might
 	  be removed during a write (using the floppy drive).
 
+config MTD_POWERNV_FLASH
+	tristate "powernv flash MTD driver"
+	depends on PPC_POWERNV
+	help
+	  This provides an MTD device for flash on powernv OPAL platforms
+
 comment "Disk-On-Chip Device Drivers"
 
 config MTD_DOCG3
diff --git a/drivers/mtd/devices/Makefile b/drivers/mtd/devices/Makefile
index f0b0e61..7912d3a 100644
--- a/drivers/mtd/devices/Makefile
+++ b/drivers/mtd/devices/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_MTD_SPEAR_SMI)	+= spear_smi.o
 obj-$(CONFIG_MTD_SST25L)	+= sst25l.o
 obj-$(CONFIG_MTD_BCM47XXSFLASH)	+= bcm47xxsflash.o
 obj-$(CONFIG_MTD_ST_SPI_FSM)    += st_spi_fsm.o
+obj-$(CONFIG_MTD_POWERNV_FLASH)	+= powernv_flash.o
 
 
 CFLAGS_docg3.o			+= -I$(src)
diff --git a/drivers/mtd/devices/powernv_flash.c b/drivers/mtd/devices/powernv_flash.c
new file mode 100644
index 0000000..18f8a19
--- /dev/null
+++ b/drivers/mtd/devices/powernv_flash.c
@@ -0,0 +1,288 @@
+/*
+ * OPAL PNOR flash MTD abstraction
+ *
+ * IBM 2015
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+
+#include <asm/opal.h>
+
+
+/*
+ * This driver creates the a Linux MTD abstraction for platform PNOR flash
+ * backed by OPAL calls
+ */
+
+struct powernv_flash {
+	struct mtd_info	mtd;
+	uint64_t	id;
+};
+
+enum flash_op {
+	FLASH_OP_READ,
+	FLASH_OP_WRITE,
+	FLASH_OP_ERASE,
+};
+
+static int powernv_flash_async_op(struct mtd_info *mtd, enum flash_op op,
+		loff_t offset, size_t len, size_t *retlen, u_char *buf)
+{
+	struct powernv_flash *info = (struct powernv_flash *)mtd->priv;
+	struct device *dev = &mtd->dev;
+	int token;
+	struct opal_msg msg;
+	int rc;
+
+	dev_dbg(dev, "%s(op=%d, offset=0x%llx, len=%zu)\n",
+			__func__, op, offset, len);
+
+	token = opal_async_get_token_interruptible();
+	if (token < 0) {
+		dev_err(dev, "Failed to get an async token\n");
+		return -ENOMEM;
+	}
+
+	switch (op) {
+	case FLASH_OP_READ:
+		rc = opal_flash_read(info->id, offset, __pa(buf), len, token);
+		break;
+	case FLASH_OP_WRITE:
+		rc = opal_flash_write(info->id, offset, __pa(buf), len, token);
+		break;
+	case FLASH_OP_ERASE:
+		rc = opal_flash_erase(info->id, offset, len, token);
+		break;
+	default:
+		BUG_ON(1);
+	}
+
+	if (rc != OPAL_ASYNC_COMPLETION) {
+		dev_err(dev, "opal_flash_async_op(op=%d) failed (rc %d)\n",
+				op, rc);
+		return -EIO;
+	}
+
+	rc = opal_async_wait_response(token, &msg);
+	opal_async_release_token(token);
+	if (rc) {
+		dev_err(dev, "opal async wait failed (rc %d)\n", rc);
+		return -EIO;
+	}
+
+	rc = be64_to_cpu(msg.params[1]);
+	if (rc == OPAL_SUCCESS) {
+		rc = 0;
+		if (retlen)
+			*retlen = len;
+	} else {
+		rc = -EIO;
+	}
+
+	return 0;
+}
+
+/**
+ * @mtd: the device
+ * @from: the offset to read from
+ * @len: the number of bytes to read
+ * @retlen: the number of bytes actually read
+ * @buf: the filled in buffer
+ *
+ * Returns 0 if read successful, or -ERRNO if an error occurred
+ */
+static int powernv_flash_read(struct mtd_info *mtd, loff_t from, size_t len,
+	     size_t *retlen, u_char *buf)
+{
+	return powernv_flash_async_op(mtd, FLASH_OP_READ, from,
+			len, retlen, buf);
+}
+
+/**
+ * @mtd: the device
+ * @to: the offset to write to
+ * @len: the number of bytes to write
+ * @retlen: the number of bytes actually written
+ * @buf: the buffer to get bytes from
+ *
+ * Returns 0 if write successful, -ERRNO if error occured
+ */
+static int powernv_flash_write(struct mtd_info *mtd, loff_t to, size_t len,
+		     size_t *retlen, const u_char *buf)
+{
+	return powernv_flash_async_op(mtd, FLASH_OP_WRITE, to,
+			len, retlen, (u_char *)buf);
+}
+
+/**
+ * @mtd: the device
+ * @erase: the erase info
+ * Returns 0 if erase successful or -ERRNO if an error occured
+ */
+static int powernv_flash_erase(struct mtd_info *mtd, struct erase_info *erase)
+{
+	int rc;
+
+	erase->state = MTD_ERASING;
+
+	/* todo: register our own notifier to do a true async implementation */
+	rc =  powernv_flash_async_op(mtd, FLASH_OP_ERASE, erase->addr,
+			erase->len, NULL, NULL);
+
+	if (rc) {
+		erase->fail_addr = erase->addr;
+		erase->state = MTD_ERASE_FAILED;
+	} else {
+		erase->state = MTD_ERASE_DONE;
+	}
+	mtd_erase_callback(erase);
+	return 0;
+}
+
+/**
+ * powernv_flash_set_driver_info - Fill the mtd_info structure and docg3
+ * structure @pdev: The platform device
+ * @mtd: The structure to fill
+ */
+static int __init powernv_flash_set_driver_info(struct device *dev,
+		struct mtd_info *mtd)
+{
+	const __be32 *reg, *erase_size;
+	int count;
+
+	erase_size = of_get_property(dev->of_node,
+			"ibm,flash-block-size", NULL);
+	if (!erase_size) {
+		dev_err(dev, "no device property 'ibm,flash-block-size'\n");
+		return 1;
+	}
+
+	reg = of_get_property(dev->of_node, "reg", &count);
+	if (count / sizeof(__be32) != 2) {
+		dev_err(dev, "couldn't get resource information count=%d\n",
+				count);
+		return 1;
+	}
+
+	/* Going to have to check what details I need to set and how to
+	 * get them */
+	mtd->name = of_get_property(dev->of_node, "name", NULL);
+	mtd->type = MTD_NANDFLASH;
+	mtd->flags = MTD_CAP_NANDFLASH;
+	mtd->size = of_read_number(reg, 2);
+	mtd->erasesize = of_read_number(erase_size, 1);
+	mtd->writebufsize = mtd->writesize = 1;
+	mtd->owner = THIS_MODULE;
+	mtd->_erase = powernv_flash_erase;
+	mtd->_read = powernv_flash_read;
+	mtd->_write = powernv_flash_write;
+	mtd->dev.parent = dev;
+	return 0;
+}
+
+/**
+ * powernv_flash_probe
+ * @pdev: platform device
+ *
+ * Returns 0 on success, -ENOMEM, -ENXIO on error
+ */
+static int __init powernv_flash_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct powernv_flash *data;
+	const __be32 *prop;
+	int ret;
+
+	ret = -ENOMEM;
+	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+	if (!data) {
+		dev_err(dev, "couldn't allocate memory\n");
+		goto out;
+	}
+	data->mtd.priv = data;
+
+	ret = -EIO;
+	prop = of_get_property(dev->of_node, "ibm,opal-id", NULL);
+	if (!prop) {
+		dev_err(dev, "no device property 'ibm,opal-id\n");
+		goto out;
+	}
+	data->id = of_read_number(prop, 1);
+
+	if (powernv_flash_set_driver_info(dev, &data->mtd))
+		goto out;
+
+	/*
+	 * Skiboot does expose the partitioning information via OF and the
+	 * ofpart parser could partition it all nicely.
+	 *
+	 * The current flash that skiboot exposes is one contiguous flash chip
+	 * with an ffs partition at the start, it should prove easier for users
+	 * to deal with partitions or not as they see fit
+	 */
+	ret = mtd_device_parse_register(&data->mtd, NULL , NULL, NULL, 0);
+
+out:
+	return ret;
+}
+
+/**
+ * op_release - Release the driver
+ * @pdev: the platform device
+ *
+ * Returns 0
+ */
+static int __exit powernv_flash_release(struct platform_device *pdev)
+{
+	/* All resources should be freed automatically */
+	return 0;
+}
+
+static struct of_device_id powernv_flash_match[] = {
+	{ .compatible = "ibm,opal-flash" },
+	{}
+};
+
+static struct platform_driver powernv_flash_driver = {
+	.driver		= {
+		.name		= "powernv_flash",
+		.owner		= THIS_MODULE,
+		.of_match_table	= powernv_flash_match,
+	},
+	.remove		= powernv_flash_release,
+	.probe		= powernv_flash_probe,
+};
+
+module_platform_driver(powernv_flash_driver);
+
+MODULE_DEVICE_TABLE(of, powernv_flash_match);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Cyril Bur <cyril.bur at au1.ibm.com>");
+MODULE_DESCRIPTION("MTD abstraction for OPAL flash");
-- 
1.9.1



More information about the Linuxppc-dev mailing list